macro to test available methods and operation on the mathcore GenVector classes
// Example macro to test available methods and operation on the
// mathcore GenVector classes. The results are compared and check at the
// numerical precision levels.
// Some small discrepancy can appear when the macro
// is executed on different architectures where it has been calibrated (Power PC G5)
// The macro is divided in 4 parts:
// - testVector3D : tests of the 3D Vector classes
// - testPoint3D : tests of the 3D Point classes
// - testLorentzVector : tests of the 4D LorentzVector classes
// - testVectorUtil : tests of the utility functions of all the vector classes
//
// To execute the macro type in:
//
// root[0]: .x mathcoreGenVector.C
#include "TMatrixD.h"
#include "TVectorD.h"
#ifndef __CINT__
#include "Math/Point3D.h"
#include "Math/Vector3D.h"
#include "Math/Vector4D.h"
#include "Math/Rotation3D.h"
#include "Math/EulerAngles.h"
#include "Math/AxisAngle.h"
#include "Math/Quaternion.h"
#include "Math/RotationX.h"
#include "Math/RotationY.h"
#include "Math/RotationZ.h"
#include "Math/LorentzRotation.h"
#include "Math/Boost.h"
#include "Math/BoostX.h"
#include "Math/BoostY.h"
#include "Math/BoostZ.h"
#include "Math/Transform3D.h"
#include "Math/Plane3D.h"
#include "Math/VectorUtil.h"
using namespace ROOT::Math;
#endif
int ntest = 0;
int nfail = 0;
int ok = 0;
int compare( double v1, double v2, const char* name, double Scale = 1.0) {
ntest = ntest + 1;
// numerical double limit for epsilon
double eps = Scale* 2.22044604925031308e-16;
int iret = 0;
double delta = v2 - v1;
double d = 0;
if (delta < 0 ) delta = - delta;
if (v1 == 0 || v2 == 0) {
if (delta > eps ) {
iret = 1;
}
}
// skip case v1 or v2 is infinity
else {
d = v1;
if ( v1 < 0) d = -d;
// add also case when delta is small by default
if ( delta/d > eps && delta > eps )
iret = 1;
}
if (iret == 0)
std::cout << ".";
else {
int pr = std::cout.precision (18);
int discr;
if (d != 0)
discr = int(delta/d/eps);
else
discr = int(delta/eps);
std::cout << "\nDiscrepancy in " << name << "() : " << v1 << " != " << v2 << " discr = " << discr
<< " (Allowed discrepancy is " << eps << ")\n";
std::cout.precision (pr);
nfail = nfail + 1;
}
return iret;
}
int testVector3D() {
std::cout << "\n************************************************************************\n "
<< " Vector 3D Test"
<< "\n************************************************************************\n";
XYZVector v1(0.01, 0.02, 16);
//XYZVector v1(1.0, 2.0, 3.0);
// XYZVector v1(1.0, 2.0, 30.0);
// double R = sqrt (v1.X()*v1.X() + v1.Y()*v1.Y() + v1.Z()*v1.Z());
// // this formula in not precise enough
// // double Theta = R>0 ? acos ( v1.Z()/r ) : 0;
// double Rho = sqrt (v1.X()*v1.X() + v1.Y()*v1.Y());
// double Theta = v1.Z() == 0 || Rho == 0 ? 0 : atan2( Rho, v1.Z() );
// double Phi = Rho>0 ? atan2 (v1.Y(), v1.X()) : 0;
std::cout << "Test Cartesian-Polar : " ;
Polar3DVector v2(v1.R(), v1.Theta(), v1.Phi() );
ok = 0;
ok+= compare(v1.X(), v2.X(), "x");
ok+= compare(v1.Y(), v2.Y(), "y");
ok+= compare(v1.Z(), v2.Z(), "z");
ok+= compare(v1.Phi(), v2.Phi(), "phi");
ok+= compare(v1.Theta(), v2.Theta(), "theta");
ok+= compare(v1.R(), v2.R(), "r");
ok+= compare(v1.Eta(), v2.Eta(), "eta");
ok+= compare(v1.Rho(), v2.Rho(), "rho");
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test Cartesian-CylindricalEta : ";
RhoEtaPhiVector v3( v1.Rho(), v1.Eta(), v1.Phi() );
ok = 0;
ok+= compare(v1.X(), v3.X(), "x");
ok+= compare(v1.Y(), v3.Y(), "y");
ok+= compare(v1.Z(), v3.Z(), "z");
ok+= compare(v1.Phi(), v3.Phi(), "phi");
ok+= compare(v1.Theta(), v3.Theta(), "theta");
ok+= compare(v1.R(), v3.R(), "r");
ok+= compare(v1.Eta(), v3.Eta(), "eta");
ok+= compare(v1.Rho(), v3.Rho(), "rho");
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test Cartesian-Cylindrical : ";
RhoZPhiVector v4( v1.Rho(), v1.Z(), v1.Phi() );
ok = 0;
ok+= compare(v1.X(), v4.X(), "x");
ok+= compare(v1.Y(), v4.Y(), "y");
ok+= compare(v1.Z(), v4.Z(), "z");
ok+= compare(v1.Phi(), v4.Phi(), "phi");
ok+= compare(v1.Theta(), v4.Theta(), "theta");
ok+= compare(v1.R(), v4.R(), "r");
ok+= compare(v1.Eta(), v4.Eta(), "eta");
ok+= compare(v1.Rho(), v4.Rho(), "rho");
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test Operations : " ;
ok = 0;
double Dot = v1.Dot(v2);
ok+= compare( Dot, v1.Mag2(),"dot" );
XYZVector vcross = v1.Cross(v2);
ok+= compare( vcross.R(), 0,"cross" );
//std::cout << "\nTest Unit & scaling : " ;
XYZVector vscale1 = v1*10;
XYZVector vscale2 = vscale1/10;
ok+= compare( v1.R(), vscale2.R(), "scale");
XYZVector vu = v1.Unit();
ok+= compare(v2.Phi(),vu.Phi(),"unit Phi");
ok+= compare(v2.Theta(),vu.Theta(),"unit Theta");
ok+= compare(1.0,vu.R(),"unit ");
XYZVector q1 = v1;
// RhoEtaPhiVector q2 = v1; ! copy onstructor between different vector does not work yet)
RhoEtaPhiVector q2(1.0,1.0,1.0);
XYZVector q3 = q1 + q2;
XYZVector q4 = q3 - q2;
ok+= compare( q4.X(), q1.X(), "op X" );
ok+= compare( q4.Y(), q1.Y(), "op Y" );
ok+= compare( q4.Z(), q1.Z(), "op Z" );
// test operator ==
XYZVector w1 = v1;
Polar3DVector w2 = v2;
RhoEtaPhiVector w3 = v3;
RhoZPhiVector w4 = v4;
ok+= compare( w1 == v1, static_cast<double>(true), "== XYZ");
ok+= compare( w2 == v2, static_cast<double>(true), "== Polar");
ok+= compare( w3 == v3, static_cast<double>(true), "== RhoEtaPhi");
ok+= compare( w4 == v4, static_cast<double>(true), "== RhoZPhi");
if (ok == 0) std::cout << "\t OK " << std::endl;
//test setters
std::cout << "Test Setters : " ;
q2.SetXYZ(q1.X(), q1.Y(), q1.Z() );
ok+= compare( q2.X(), q1.X(), "setXYZ X" );
ok+= compare( q2.Y(), q1.Y(), "setXYZ Y" );
ok+= compare( q2.Z(), q1.Z(), "setXYZ Z" );
q2.SetCoordinates( 2.0*q1.Rho(), q1.Eta(), q1.Phi() );
XYZVector q1s = 2.0*q1;
ok+= compare( q2.X(), q1s.X(), "set X" );
ok+= compare( q2.Y(), q1s.Y(), "set Y" );
ok+= compare( q2.Z(), q1s.Z(), "set Z" );
if (ok == 0) std::cout << "\t\t OK " << std::endl;
std::cout << "Test Linear Algebra conversion: " ;
XYZVector vxyz1(1.,2.,3.);
TVectorD vla1(3);
vxyz1.Coordinates().GetCoordinates(vla1.GetMatrixArray() );
TVectorD vla2(3);
vla2[0] = 1.; vla2[1] = -2.; vla2[2] = 1.;
XYZVector vxyz2;
vxyz2.SetCoordinates(&vla2[0]);
ok = 0;
double prod1 = vxyz1.Dot(vxyz2);
double prod2 = vla1*vla2;
ok+= compare( prod1, prod2, "la test" );
if (ok == 0) std::cout << "\t\t OK " << std::endl;
return ok;
}
int testPoint3D() {
std::cout << "\n************************************************************************\n "
<< " Point 3D Tests"
<< "\n************************************************************************\n";
//XYZPoint p1(0.00001, 0.00001, 30000000000.0);
XYZPoint p1(1.0, 2.0, 3.0);
std::cout << "Test Cartesian-Polar : ";
Polar3DPoint p2(p1.R(), p1.Theta(), p1.Phi() );
ok = 0;
ok+= compare(p1.x(), p2.X(), "x");
ok+= compare(p1.y(), p2.Y(), "y");
ok+= compare(p1.z(), p2.Z(), "z");
ok+= compare(p1.phi(), p2.Phi(), "phi");
ok+= compare(p1.theta(), p2.Theta(), "theta");
ok+= compare(p1.r(), p2.R(), "r");
ok+= compare(p1.eta(), p2.Eta(), "eta");
ok+= compare(p1.rho(), p2.Rho(), "rho");
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test Polar-CylindricalEta : ";
RhoEtaPhiPoint p3( p2.Rho(), p2.Eta(), p2.Phi() );
ok = 0;
ok+= compare(p2.X(), p3.X(), "x");
ok+= compare(p2.Y(), p3.Y(), "y");
ok+= compare(p2.Z(), p3.Z(), "z",3);
ok+= compare(p2.Phi(), p3.Phi(), "phi");
ok+= compare(p2.Theta(), p3.Theta(), "theta");
ok+= compare(p2.R(), p3.R(), "r");
ok+= compare(p2.Eta(), p3.Eta(), "eta");
ok+= compare(p2.Rho(), p3.Rho(), "rho");
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test operations : ";
//std::cout << "\nTest Dot and Cross products with Vectors : ";
Polar3DVector vperp(1.,p1.Theta() + TMath::PiOver2(),p1.Phi() );
double Dot = p1.Dot(vperp);
ok+= compare( Dot, 0.0,"dot", 10 );
XYZPoint vcross = p1.Cross(vperp);
ok+= compare( vcross.R(), p1.R(),"cross mag" );
ok+= compare( vcross.Dot(vperp), 0.0,"cross dir" );
XYZPoint pscale1 = 10*p1;
XYZPoint pscale2 = pscale1/10;
ok+= compare( p1.R(), pscale2.R(), "scale");
// test operator ==
ok+= compare( p1 == pscale2, static_cast<double>(true), "== Point");
//RhoEtaPhiPoint q1 = p1; ! constructor yet not working in CINT
RhoEtaPhiPoint q1; q1 = p1;
q1.SetCoordinates(p1.Rho(),2.0, p1.Phi() );
Polar3DVector v2(p1.R(), p1.Theta(),p1.Phi());
//#ifdef WHEN_CINT_FIXED
RhoEtaPhiPoint q3 = q1 + v2;
// point -point in vector does not work yet
RhoEtaPhiPoint q4 = q3 - v2;
ok+= compare( q4.X(), q1.X(), "PV op X" );
ok+= compare( q4.Y(), q1.Y(), "PV op Y" );
ok+= compare( q4.Z(), q1.Z(), "PV op Z" ,2);
//#endif
if (ok == 0) std::cout << "\t OK " << std::endl;
// RhoEtaPhiVector v4 = q3 - q1;
// ok+= compare( v4.X(), v2.X(), "op X" );
// ok+= compare( v4.Y(), v2.Y(), "op Y" );
// ok+= compare( v4.Z(), v2.Z(), "op Z" );
return ok;
}
int testLorentzVector() {
std::cout << "\n************************************************************************\n "
<< " Loorentz Vector Tests"
<< "\n************************************************************************\n";
//XYZTVector v1(0.00001, 0.00001, 30000000000.0);
XYZTVector v1(1.0, 2.0, 3.0, 4.0);
std::cout << "Test XYZT - PtEtaPhiE Vectors: ";
PtEtaPhiEVector v2( v1.Rho(), v1.Eta(), v1.Phi(), v1.E() );
ok = 0;
ok+= compare(v1.Px(), v2.X(), "x");
ok+= compare(v1.Py(), v2.Y(), "y");
ok+= compare(v1.Pz(), v2.Z(), "z", 2);
ok+= compare(v1.E(), v2.T(), "e");
ok+= compare(v1.Phi(), v2.Phi(), "phi");
ok+= compare(v1.Theta(), v2.Theta(), "theta");
ok+= compare(v1.Pt(), v2.Pt(), "pt");
ok+= compare(v1.M(), v2.M(), "mass", 5);
ok+= compare(v1.Et(), v2.Et(), "et");
ok+= compare(v1.Mt(), v2.Mt(), "mt", 3);
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test XYZT - PtEtaPhiM Vectors: ";
PtEtaPhiMVector v3( v1.Rho(), v1.Eta(), v1.Phi(), v1.M() );
ok = 0;
ok+= compare(v1.Px(), v3.X(), "x");
ok+= compare(v1.Py(), v3.Y(), "y");
ok+= compare(v1.Pz(), v3.Z(), "z", 2);
ok+= compare(v1.E(), v3.T(), "e");
ok+= compare(v1.Phi(), v3.Phi(), "phi");
ok+= compare(v1.Theta(), v3.Theta(), "theta");
ok+= compare(v1.Pt(), v3.Pt(), "pt");
ok+= compare(v1.M(), v3.M(), "mass", 5);
ok+= compare(v1.Et(), v3.Et(), "et");
ok+= compare(v1.Mt(), v3.Mt(), "mt", 3);
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test PtEtaPhiE - PxPyPzM Vect.: ";
PxPyPzMVector v4( v3.X(), v3.Y(), v3.Z(), v3.M() );
ok = 0;
ok+= compare(v4.Px(), v3.X(), "x");
ok+= compare(v4.Py(), v3.Y(), "y");
ok+= compare(v4.Pz(), v3.Z(), "z",2);
ok+= compare(v4.E(), v3.T(), "e");
ok+= compare(v4.Phi(), v3.Phi(), "phi");
ok+= compare(v4.Theta(), v3.Theta(), "theta");
ok+= compare(v4.Pt(), v3.Pt(), "pt");
ok+= compare(v4.M(), v3.M(), "mass",5);
ok+= compare(v4.Et(), v3.Et(), "et");
ok+= compare(v4.Mt(), v3.Mt(), "mt",3);
if (ok == 0) std::cout << "\t OK " << std::endl;
std::cout << "Test operations : ";
//std::cout << "\nTest Dot product : " ;
ok = 0;
double Dot = v1.Dot(v2);
ok+= compare( Dot, v1.M2(),"dot" , 10 );
//std::cout << "\nTest scaling : " ;
XYZTVector vscale1 = v1*10;
XYZTVector vscale2 = vscale1/10;
ok+= compare( v1.M(), vscale2.M(), "scale");
XYZTVector q1 = v1;
// RhoEtaPhiVector q2 = v1; ! copy onstructor between different vector does not work yet)
PtEtaPhiEVector q2(1.0,1.0,1.0,5.0);
XYZTVector q3 = q1 + q2;
XYZTVector q4 = q3 - q2;
ok+= compare( q4.x(), q1.X(), "op X" );
ok+= compare( q4.y(), q1.Y(), "op Y" );
ok+= compare( q4.z(), q1.Z(), "op Z" );
ok+= compare( q4.t(), q1.E(), "op E" );
// test operator ==
XYZTVector w1 = v1;
PtEtaPhiEVector w2 = v2;
PtEtaPhiMVector w3 = v3;
PxPyPzMVector w4 = v4;
ok+= compare( w1 == v1, static_cast<double>(true), "== PxPyPzE");
ok+= compare( w2 == v2, static_cast<double>(true), "== PtEtaPhiE");
ok+= compare( w3 == v3, static_cast<double>(true), "== PtEtaPhiM");
ok+= compare( w4 == v4, static_cast<double>(true), "== PxPyPzM");
// test gamma beta and boost
XYZVector b = q1.BoostToCM();
double beta = q1.Beta();
double gamma = q1.Gamma();
ok += compare( b.R(), beta, "beta" );
ok += compare( gamma, 1./sqrt( 1 - beta*beta ), "gamma");
if (ok == 0) std::cout << "\t OK " << std::endl;
//test setters
std::cout << "Test Setters : " ;
q2.SetXYZT(q1.Px(), q1.Py(), q1.Pz(), q1.E() );
ok+= compare( q2.X(), q1.X(), "setXYZT X" );
ok+= compare( q2.Y(), q1.Y(), "setXYZT Y" );
ok+= compare( q2.Z(), q1.Z(), "setXYZT Z" ,2);
ok+= compare( q2.T(), q1.E(), "setXYZT E" );
q2.SetCoordinates( 2.0*q1.Rho(), q1.Eta(), q1.Phi(), 2.0*q1.E() );
XYZTVector q1s = q1*2.0;
ok+= compare( q2.X(), q1s.X(), "set X" );
ok+= compare( q2.Y(), q1s.Y(), "set Y" );
ok+= compare( q2.Z(), q1s.Z(), "set Z" ,2);
ok+= compare( q2.T(), q1s.T(), "set E" );
if (ok == 0) std::cout << "\t OK " << std::endl;
return ok;
}
int testVectorUtil() {
std::cout << "\n************************************************************************\n "
<< " Utility Function Tests"
<< "\n************************************************************************\n";
std::cout << "Test Vector utility functions : ";
XYZVector v1(1.0, 2.0, 3.0);
Polar3DVector v2pol(v1.R(), v1.Theta()+TMath::PiOver2(), v1.Phi() + 1.0);
// mixedmethods not yet impl.
XYZVector v2; v2 = v2pol;
ok = 0;
ok += compare( VectorUtil::DeltaPhi(v1,v2), 1.0, "deltaPhi Vec");
RhoEtaPhiVector v2cyl(v1.Rho(), v1.Eta() + 1.0, v1.Phi() + 1.0);
v2 = v2cyl;
ok += compare( VectorUtil::DeltaR(v1,v2), sqrt(2.0), "DeltaR Vec");
XYZVector vperp = v1.Cross(v2);
ok += compare( VectorUtil::CosTheta(v1,vperp), 0.0, "costheta Vec");
ok += compare( VectorUtil::Angle(v1,vperp), TMath::PiOver2(), "angle Vec");
if (ok == 0) std::cout << "\t\t OK " << std::endl;
std::cout << "Test Point utility functions : ";
XYZPoint p1(1.0, 2.0, 3.0);
Polar3DPoint p2pol(p1.R(), p1.Theta()+TMath::PiOver2(), p1.Phi() + 1.0);
// mixedmethods not yet impl.
XYZPoint p2; p2 = p2pol;
ok = 0;
ok += compare( VectorUtil::DeltaPhi(p1,p2), 1.0, "deltaPhi Point");
RhoEtaPhiPoint p2cyl(p1.Rho(), p1.Eta() + 1.0, p1.Phi() + 1.0);
p2 = p2cyl;
ok += compare( VectorUtil::DeltaR(p1,p2), sqrt(2.0), "DeltaR Point");
XYZPoint pperp(vperp.X(), vperp.Y(), vperp.Z());
ok += compare( VectorUtil::CosTheta(p1,pperp), 0.0, "costheta Point");
ok += compare( VectorUtil::Angle(p1,pperp), TMath::PiOver2(), "angle Point");
if (ok == 0) std::cout << "\t\t OK " << std::endl;
std::cout << "LorentzVector utility funct.: ";
XYZTVector q1(1.0, 2.0, 3.0,4.0);
PtEtaPhiEVector q2cyl(q1.Pt(), q1.Eta()+1.0, q1.Phi() + 1.0, q1.E() );
// mixedmethods not yet impl.
XYZTVector q2; q2 = q2cyl;
ok = 0;
ok += compare( VectorUtil::DeltaPhi(q1,q2), 1.0, "deltaPhi LVec");
ok += compare( VectorUtil::DeltaR(q1,q2), sqrt(2.0), "DeltaR LVec");
XYZTVector qsum = q1+q2;
ok += compare( VectorUtil::InvariantMass(q1,q2), qsum.M(), "InvMass");
if (ok == 0) std::cout << "\t\t OK " << std::endl;
return ok;
}
int testRotation() {
std::cout << "\n************************************************************************\n "
<< " Rotation and Transformation Tests"
<< "\n************************************************************************\n";
std::cout << "Test Vector Rotations : ";
ok = 0;
XYZPoint v(1.,2,3.);
double pi = TMath::Pi();
// initiate rotation with some non -trivial angles to test all matrix
EulerAngles r1( pi/2.,pi/4., pi/3 );
Rotation3D r2(r1);
AxisAngle r3(r1);
Quaternion r4(r2);
XYZPoint v1 = r1(v);
XYZPoint v2 = r2(v);
XYZPoint v3 = r3(v);
XYZPoint v4 = r4(v);
ok+= compare(v1.X(), v2.X(), "x",2);
ok+= compare(v1.Y(), v2.Y(), "y",2);
ok+= compare(v1.Z(), v2.Z(), "z",2);
ok+= compare(v1.X(), v3.X(), "x",5);
ok+= compare(v1.Y(), v3.Y(), "y",5);
ok+= compare(v1.Z(), v3.Z(), "z",5);
ok+= compare(v1.X(), v4.X(), "x",2);
ok+= compare(v1.Y(), v4.Y(), "y",2);
ok+= compare(v1.Z(), v4.Z(), "z",2);
// test with matrix
double rdata[9];
r2.GetComponents(rdata, rdata+9);
TMatrixD m(3,3,rdata);
double vdata[3];
v.GetCoordinates(vdata);
TVectorD q(3,vdata);
TVectorD q2 = m*q;
XYZPoint v5;
v5.SetCoordinates( q2.GetMatrixArray() );
ok+= compare(v1.X(), v5.X(), "x");
ok+= compare(v1.Y(), v5.Y(), "y");
ok+= compare(v1.Z(), v5.Z(), "z");
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test Axial Rotations : ";
ok = 0;
RotationX rx( pi/3);
RotationY ry( pi/4);
RotationZ rz( 4*pi/5);
Rotation3D r3x(rx);
Rotation3D r3y(ry);
Rotation3D r3z(rz);
XYZPoint vrot1 = rx * ry * rz * v;
XYZPoint vrot2 = r3x * r3y * r3z * v;
ok+= compare(vrot1.X(), vrot2.X(), "x");
ok+= compare(vrot1.Y(), vrot2.Y(), "y");
ok+= compare(vrot1.Z(), vrot2.Z(), "z");
vrot1 = rz * ry * rx * v;
vrot2 = r3z * r3y * r3x * v;
ok+= compare(vrot1.X(), vrot2.X(), "x");
ok+= compare(vrot1.Y(), vrot2.Y(), "y");
ok+= compare(vrot1.Z(), vrot2.Z(), "z");
XYZPoint vinv1 = rx.Inverse()*ry.Inverse()*rz.Inverse()*vrot1;
ok+= compare(vinv1.X(), v.X(), "x",2);
ok+= compare(vinv1.Y(), v.Y(), "y");
ok+= compare(vinv1.Z(), v.Z(), "z");
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test Rotations by a PI angle : ";
ok = 0;
double b[4] = { 6,8,10,3.14159265358979323 };
AxisAngle arPi(b,b+4 );
Rotation3D rPi(arPi);
AxisAngle a1(rPi);
ok+= compare(arPi.Axis().X(), a1.Axis().X(),"x");
ok+= compare(arPi.Axis().Y(), a1.Axis().Y(),"y");
ok+= compare(arPi.Axis().Z(), a1.Axis().Z(),"z");
ok+= compare(arPi.Angle(), a1.Angle(),"angle");
EulerAngles ePi(rPi);
EulerAngles e1(a1);
ok+= compare(ePi.Phi(), e1.Phi(),"phi");
ok+= compare(ePi.Theta(), e1.Theta(),"theta");
ok+= compare(ePi.Psi(), e1.Psi(),"ps1");
if (ok == 0) std::cout << "\t\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test Inversions : ";
ok = 0;
EulerAngles s1 = r1.Inverse();
Rotation3D s2 = r2.Inverse();
AxisAngle s3 = r3.Inverse();
Quaternion s4 = r4.Inverse();
// cout << r2 << endl;
// cout << s2 << endl;
// euler angles not yet impl.
XYZPoint p = s2 * r2 * v;
ok+= compare(p.X(), v.X(), "x",10);
ok+= compare(p.Y(), v.Y(), "y",10);
ok+= compare(p.Z(), v.Z(), "z",10);
p = s3 * r3 * v;
// axis angle inversion not very precise
ok+= compare(p.X(), v.X(), "x",1E9);
ok+= compare(p.Y(), v.Y(), "y",1E9);
ok+= compare(p.Z(), v.Z(), "z",1E9);
p = s4 * r4 * v;
ok+= compare(p.X(), v.X(), "x",10);
ok+= compare(p.Y(), v.Y(), "y",10);
ok+= compare(p.Z(), v.Z(), "z",10);
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
// test Rectify
std::cout << "Test rectify : ";
ok = 0;
XYZVector u1(0.999498,-0.00118212,-0.0316611);
XYZVector u2(0,0.999304,-0.0373108);
XYZVector u3(0.0316832,0.0372921,0.998802);
Rotation3D rr(u1,u2,u3);
// check orto-normality
XYZPoint vrr = rr(v);
ok+= compare(v.R(), vrr.R(), "R",1.E9);
if (ok == 0) std::cout << "\t\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test Transform3D : ";
ok = 0;
XYZVector d(1.,-2.,3.);
Transform3D t(r2,d);
XYZPoint pd = t * v;
// apply directly rotation
XYZPoint vd = r2 * v + d;
ok+= compare(pd.X(), vd.X(), "x");
ok+= compare(pd.Y(), vd.Y(), "y");
ok+= compare(pd.Z(), vd.Z(), "z");
// test with matrix
double tdata[12];
t.GetComponents(tdata);
TMatrixD mt(3,4,tdata);
double vData[4]; // needs a vector of dim 4
v.GetCoordinates(vData);
vData[3] = 1;
TVectorD q0(4,vData);
TVectorD qt = mt*q0;
ok+= compare(pd.X(), qt(0), "x");
ok+= compare(pd.Y(), qt(1), "y");
ok+= compare(pd.Z(), qt(2), "z");
// test inverse
Transform3D tinv = t.Inverse();
p = tinv * t * v;
ok+= compare(p.X(), v.X(), "x",10);
ok+= compare(p.Y(), v.Y(), "y",10);
ok+= compare(p.Z(), v.Z(), "z",10);
// test costruct inverse from translation first
Transform3D tinv2( -d, r2.Inverse() );
p = tinv2 * t * v;
ok+= compare(p.X(), v.X(), "x",10);
ok+= compare(p.Y(), v.Y(), "y",10);
ok+= compare(p.Z(), v.Z(), "z",10);
// test from only rotation and only translation
Transform3D ta( EulerAngles(1.,2.,3.) );
Transform3D tb( XYZVector(1,2,3) );
Transform3D tc( Rotation3D(EulerAngles(1.,2.,3.)) , XYZVector(1,2,3) );
Transform3D td( XYZVector(1,2,3), Rotation3D( EulerAngles(1.,2.,3.) ) );
ok+= compare( tc == tb*ta, static_cast<double>(true), "== Rot*Tra");
ok+= compare( td == ta*tb, static_cast<double>(true), "== Rot*Tra");
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test Plane3D : ";
ok = 0;
// test transfrom a 3D plane
XYZPoint p1(1,2,3);
XYZPoint p2(-2,-1,4);
XYZPoint p3(-1,3,2);
Plane3D plane(p1,p2,p3);
XYZVector n = plane.Normal();
// normal is perpendicular to vectors on the planes obtained from subracting the points
ok+= compare(n.Dot(p2-p1), 0.0, "n.v12",10);
ok+= compare(n.Dot(p3-p1), 0.0, "n.v13",10);
ok+= compare(n.Dot(p3-p2), 0.0, "n.v23",10);
Plane3D plane1 = t(plane);
// transform the points
XYZPoint pt1 = t(p1);
XYZPoint pt2 = t(p2);
XYZPoint pt3 = t(p3);
Plane3D plane2(pt1,pt2,pt3);
XYZVector n1 = plane1.Normal();
XYZVector n2 = plane2.Normal();
ok+= compare(n1.X(), n2.X(), "a",10);
ok+= compare(n1.Y(), n2.Y(), "b",10);
ok+= compare(n1.Z(), n2.Z(), "c",10);
ok+= compare(plane1.HesseDistance(), plane2.HesseDistance(), "d",10);
// check distances
ok += compare(plane1.Distance(pt1), 0.0, "distance",10);
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
std::cout << "Test LorentzRotation : ";
ok = 0;
XYZTVector lv(1.,2.,3.,4.);
// test from rotx (using boosts and 3D rotations not yet impl.)
// rx,ry and rz already defined
Rotation3D r3d = rx*ry*rz;
LorentzRotation rlx(rx);
LorentzRotation rly(ry);
LorentzRotation rlz(rz);
LorentzRotation rl0 = rlx*rly*rlz;
LorentzRotation rl1( r3d);
// cout << rl << endl;
// cout << rl0 << endl;
// int eq = rl0 == rl;
// cout << eq << endl;
// double d1[16];
// double d2[16];
// rl.GetComponents(d1,d1+16);
// rl0.GetComponents(d2,d2+16);
// for (int i = 0; i < 16; ++i)
// ok+= compare(d1[i], d2[i], "i",1);
//ok+= compare( rl == rl2, static_cast<double>(true), " LorenzRot");
// cout << Rotation3D(rx) << endl;
XYZTVector lv0 = rl0 * lv;
XYZTVector lv1 = rl1 * lv;
XYZTVector lv2 = r3d * lv;
ok+= compare(lv1== lv2,true,"V0==V2");
ok+= compare(lv1== lv2,true,"V1==V2");
double rlData[16];
rl0.GetComponents(rlData);
TMatrixD ml(4,4,rlData);
// ml.Print();
double lvData[4];
lv.GetCoordinates(lvData);
TVectorD ql(4,lvData);
TVectorD qlr = ml*ql;
ok+= compare(lv1.X(), qlr(0), "x");
ok+= compare(lv1.Y(), qlr(1), "y");
ok+= compare(lv1.Z(), qlr(2), "z");
ok+= compare(lv1.E(), qlr(3), "t");
// test inverse
lv0 = rl0 * rl0.Inverse() * lv;
ok+= compare(lv0.X(), lv.X(), "x");
ok+= compare(lv0.Y(), lv.Y(), "y");
ok+= compare(lv0.Z(), lv.Z(), "z");
ok+= compare(lv0.E(), lv.E(), "t");
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
// test Boosts
std::cout << "Test Boost : ";
ok = 0;
Boost bst( 0.3,0.4,0.5); // boost (must be <= 1)
XYZTVector lvb = bst ( lv );
LorentzRotation rl2 (bst);
XYZTVector lvb2 = rl2 (lv);
// test with lorentz rotation
ok+= compare(lvb.X(), lvb2.X(), "x");
ok+= compare(lvb.Y(), lvb2.Y(), "y");
ok+= compare(lvb.Z(), lvb2.Z(), "z");
ok+= compare(lvb.E(), lvb2.E(), "t");
ok+= compare(lvb.M(), lv.M(), "m",50); // m must stay constant
// test inverse
lv0 = bst.Inverse() * lvb;
ok+= compare(lv0.X(), lv.X(), "x",5);
ok+= compare(lv0.Y(), lv.Y(), "y",5);
ok+= compare(lv0.Z(), lv.Z(), "z",3);
ok+= compare(lv0.E(), lv.E(), "t",3);
XYZVector brest = lv.BoostToCM();
bst.SetComponents( brest.X(), brest.Y(), brest.Z() );
XYZTVector lvr = bst * lv;
ok+= compare(lvr.X(), 0.0, "x",10);
ok+= compare(lvr.Y(), 0.0, "y",10);
ok+= compare(lvr.Z(), 0.0, "z",10);
ok+= compare(lvr.M(), lv.M(), "m",10);
if (ok == 0) std::cout << "\t OK " << std::endl;
else std::cout << std::endl;
return ok;
}
void mathcoreGenVector() {
#ifdef __CINT__
gSystem->Load("libMathCore");
using namespace ROOT::Math;
#endif
testVector3D();
testPoint3D();
testLorentzVector();
testVectorUtil();
testRotation();
std::cout << "\n\nNumber of tests " << ntest << " failed = " << nfail << std::endl;
}
ROOT page - Class index - Class Hierarchy - Top of the page
This page has been automatically generated. If you have any comments or suggestions about the page layout send a mail to ROOT support, or contact the developers with any questions or problems regarding ROOT.