ROOT logo
ROOT » HIST » HIST » TH1

class TH1: public TNamed, public TAttLine, public TAttFill, public TAttMarker


The Histogram classes

ROOT supports the following histogram types:
  • 1-D histograms:
    • TH1C : histograms with one byte per channel. Maximum bin content = 127
    • TH1S : histograms with one short per channel. Maximum bin content = 32767
    • TH1I : histograms with one int per channel. Maximum bin content = 2147483647
    • TH1F : histograms with one float per channel. Maximum precision 7 digits
    • TH1D : histograms with one double per channel. Maximum precision 14 digits
  • 2-D histograms:
    • TH2C : histograms with one byte per channel. Maximum bin content = 127
    • TH2S : histograms with one short per channel. Maximum bin content = 32767
    • TH2I : histograms with one int per channel. Maximum bin content = 2147483647
    • TH2F : histograms with one float per channel. Maximum precision 7 digits
    • TH2D : histograms with one double per channel. Maximum precision 14 digits
  • 3-D histograms:
    • TH3C : histograms with one byte per channel. Maximum bin content = 127
    • TH3S : histograms with one short per channel. Maximum bin content = 32767
    • TH3I : histograms with one int per channel. Maximum bin content = 2147483647
    • TH3F : histograms with one float per channel. Maximum precision 7 digits
    • TH3D : histograms with one double per channel. Maximum precision 14 digits
  • Profile histograms: See classes TProfile, TProfile2D and TProfile3D. Profile histograms are used to display the mean value of Y and its RMS for each bin in X. Profile histograms are in many cases an elegant replacement of two-dimensional histograms : the inter-relation of two measured quantities X and Y can always be visualized by a two-dimensional histogram or scatter-plot; If Y is an unknown (but single-valued) approximate function of X, this function is displayed by a profile histogram with much better precision than by a scatter-plot.
All histogram classes are derived from the base class TH1
                                TH1
                                 ^
                                 |
                                 |
                                 |
         -----------------------------------------------------------
                |                |       |      |      |     |     |
                |                |      TH1C   TH1S   TH1I  TH1F  TH1D
                |                |                                 |
                |                |                                 |
                |               TH2                             TProfile
                |                |
                |                |
                |                ----------------------------------
                |                        |      |      |     |     |
                |                       TH2C   TH2S   TH2I  TH2F  TH2D
                |                                                  |
               TH3                                                 |
                |                                               TProfile2D
                |
                -------------------------------------
                        |      |      |      |      |
                       TH3C   TH3S   TH3I   TH3F   TH3D
                                                    |
                                                    |
                                                 TProfile3D
      The TH*C classes also inherit from the array class TArrayC.
      The TH*S classes also inherit from the array class TArrayS.
      The TH*I classes also inherit from the array class TArrayI.
      The TH*F classes also inherit from the array class TArrayF.
      The TH*D classes also inherit from the array class TArrayD.

Creating histograms

Histograms are created by invoking one of the constructors, e.g.

       TH1F *h1 = new TH1F("h1", "h1 title", 100, 0, 4.4);
       TH2F *h2 = new TH2F("h2", "h2 title", 40, 0, 4, 30, -3, 3);

Histograms may also be created by:

  • calling the Clone function, see below
  • making a projection from a 2-D or 3-D histogram, see below
  • reading an histogram from a file

When an histogram is created, a reference to it is automatically added to the list of in-memory objects for the current file or directory. This default behaviour can be changed by:

       h->SetDirectory(0);          for the current histogram h
       TH1::AddDirectory(kFALSE);   sets a global switch disabling the reference
When the histogram is deleted, the reference to it is removed from the list of objects in memory. When a file is closed, all histograms in memory associated with this file are automatically deleted.

Fix or variable bin size

All histogram types support either fix or variable bin sizes. 2-D histograms may have fix size bins along X and variable size bins along Y or vice-versa. The functions to fill, manipulate, draw or access histograms are identical in both cases.

Each histogram always contains 3 objects TAxis: fXaxis, fYaxis and fZaxis To access the axis parameters, do:

        TAxis *xaxis = h->GetXaxis(); etc.
        Double_t binCenter = xaxis->GetBinCenter(bin), etc.
See class TAxis for a description of all the access functions. The axis range is always stored internally in double precision.

Convention for numbering bins

For all histogram types: nbins, xlow, xup
        bin = 0;       underflow bin
        bin = 1;       first bin with low-edge xlow INCLUDED
        bin = nbins;   last bin with upper-edge xup EXCLUDED
        bin = nbins+1; overflow bin

In case of 2-D or 3-D histograms, a "global bin" number is defined. For example, assuming a 3-D histogram with (binx, biny, binz), the function

        Int_t gbin = h->GetBin(binx, biny, binz);
returns a global/linearized gbin number. This global gbin is useful to access the bin content/error information independently of the dimension. Note that to access the information other than bin content and errors one should use the TAxis object directly with e.g.:
         Double_t xcenter = h3->GetZaxis()->GetBinCenter(27);
returns the center along z of bin number 27 (not the global bin) in the 3-D histogram h3.

Alphanumeric Bin Labels

By default, an histogram axis is drawn with its numeric bin labels. One can specify alphanumeric labels instead with:
  • call TAxis::SetBinLabel(bin, label); This can always be done before or after filling. When the histogram is drawn, bin labels will be automatically drawn. See example in $ROOTSYS/tutorials/graphs/labels1.C, labels2.C
  • call to a Fill function with one of the arguments being a string, e.g.
               hist1->Fill(somename, weigth);
               hist2->Fill(x, somename, weight);
               hist2->Fill(somename, y, weight);
               hist2->Fill(somenamex, somenamey, weight);
    
    See example in $ROOTSYS/tutorials/hist/hlabels1.C, hlabels2.C
  • via TTree::Draw. see for example $ROOTSYS/tutorials/tree/cernstaff.C
               tree.Draw("Nation::Division");
    
    where "Nation" and "Division" are two branches of a Tree.

When using the options 2 or 3 above, the labels are automatically added to the list (THashList) of labels for a given axis. By default, an axis is drawn with the order of bins corresponding to the filling sequence. It is possible to reorder the axis

  • alphabetically
  • by increasing or decreasing values

The reordering can be triggered via the TAxis context menu by selecting the menu item "LabelsOption" or by calling directly TH1::LabelsOption(option, axis) where

  • axis may be "X", "Y" or "Z"
  • option may be:
    • "a" sort by alphabetic order
    • ">" sort by decreasing values
    • "<" sort by increasing values
    • "h" draw labels horizontal
    • "v" draw labels vertical
    • "u" draw labels up (end of label right adjusted)
    • "d" draw labels down (start of label left adjusted)

When using the option 2 above, new labels are added by doubling the current number of bins in case one label does not exist yet. When the Filling is terminated, it is possible to trim the number of bins to match the number of active labels by calling

           TH1::LabelsDeflate(axis) with axis = "X", "Y" or "Z"
This operation is automatic when using TTree::Draw. Once bin labels have been created, they become persistent if the histogram is written to a file or when generating the C++ code via SavePrimitive.

Histograms with automatic bins

When an histogram is created with an axis lower limit greater or equal to its upper limit, the SetBuffer is automatically called with an argument fBufferSize equal to fgBufferSize (default value=1000). fgBufferSize may be reset via the static function TH1::SetDefaultBufferSize. The axis limits will be automatically computed when the buffer will be full or when the function BufferEmpty is called.

Filling histograms

An histogram is typically filled with statements like:
       h1->Fill(x);
       h1->Fill(x, w); //fill with weight
       h2->Fill(x, y)
       h2->Fill(x, y, w)
       h3->Fill(x, y, z)
       h3->Fill(x, y, z, w)
or via one of the Fill functions accepting names described above. The Fill functions compute the bin number corresponding to the given x, y or z argument and increment this bin by the given weight. The Fill functions return the bin number for 1-D histograms or global bin number for 2-D and 3-D histograms.

If TH1::Sumw2 has been called before filling, the sum of squares of weights is also stored. One can also increment directly a bin number via TH1::AddBinContent or replace the existing content via TH1::SetBinContent. To access the bin content of a given bin, do:

       Double_t binContent = h->GetBinContent(bin);

By default, the bin number is computed using the current axis ranges. If the automatic binning option has been set via

       h->SetBit(TH1::kCanRebin);
then, the Fill Function will automatically extend the axis range to accomodate the new value specified in the Fill argument. The method used is to double the bin size until the new value fits in the range, merging bins two by two. This automatic binning options is extensively used by the TTree::Draw function when histogramming Tree variables with an unknown range.

This automatic binning option is supported for 1-D, 2-D and 3-D histograms. During filling, some statistics parameters are incremented to compute the mean value and Root Mean Square with the maximum precision.

In case of histograms of type TH1C, TH1S, TH2C, TH2S, TH3C, TH3S a check is made that the bin contents do not exceed the maximum positive capacity (127 or 32767). Histograms of all types may have positive or/and negative bin contents.

Rebinning

At any time, an histogram can be rebinned via TH1::Rebin. This function returns a new histogram with the rebinned contents. If bin errors were stored, they are recomputed during the rebinning.

Associated errors

By default, for each bin, the sum of weights is computed at fill time. One can also call TH1::Sumw2 to force the storage and computation of the sum of the square of weights per bin. If Sumw2 has been called, the error per bin is computed as the sqrt(sum of squares of weights), otherwise the error is set equal to the sqrt(bin content). To return the error for a given bin number, do:
        Double_t error = h->GetBinError(bin);

Associated functions

One or more object (typically a TF1*) can be added to the list of functions (fFunctions) associated to each histogram. When TH1::Fit is invoked, the fitted function is added to this list. Given an histogram h, one can retrieve an associated function with:
        TF1 *myfunc = h->GetFunction("myfunc");

Operations on histograms

Many types of operations are supported on histograms or between histograms
  • Addition of an histogram to the current histogram.
  • Additions of two histograms with coefficients and storage into the current histogram.
  • Multiplications and Divisions are supported in the same way as additions.
  • The Add, Divide and Multiply functions also exist to add, divide or multiply an histogram by a function.
If an histogram has associated error bars (TH1::Sumw2 has been called), the resulting error bars are also computed assuming independent histograms. In case of divisions, Binomial errors are also supported. One can mark a histogram to be an "average" histogram by setting its bit kIsAverage via myhist.SetBit(TH1::kIsAverage); When adding (see TH1::Add) average histograms, the histograms are averaged and not summed.

Fitting histograms

Histograms (1-D, 2-D, 3-D and Profiles) can be fitted with a user specified function via TH1::Fit. When an histogram is fitted, the resulting function with its parameters is added to the list of functions of this histogram. If the histogram is made persistent, the list of associated functions is also persistent. Given a pointer (see above) to an associated function myfunc, one can retrieve the function/fit parameters with calls such as:
       Double_t chi2 = myfunc->GetChisquare();
       Double_t par0 = myfunc->GetParameter(0); value of 1st parameter
       Double_t err0 = myfunc->GetParError(0);  error on first parameter

Projections of histograms

One can:

  • make a 1-D projection of a 2-D histogram or Profile see functions TH2::ProjectionX,Y, TH2::ProfileX,Y, TProfile::ProjectionX
  • make a 1-D, 2-D or profile out of a 3-D histogram see functions TH3::ProjectionZ, TH3::Project3D.

One can fit these projections via:

      TH2::FitSlicesX,Y, TH3::FitSlicesZ.

Random Numbers and histograms

TH1::FillRandom can be used to randomly fill an histogram using the contents of an existing TF1 function or another TH1 histogram (for all dimensions).

For example the following two statements create and fill an histogram 10000 times with a default gaussian distribution of mean 0 and sigma 1:

       TH1F h1("h1", "histo from a gaussian", 100, -3, 3);
       h1.FillRandom("gaus", 10000);
TH1::GetRandom can be used to return a random number distributed according the contents of an histogram.

Making a copy of an histogram

Like for any other ROOT object derived from TObject, one can use the Clone() function. This makes an identical copy of the original histogram including all associated errors and functions, e.g.:
       TH1F *hnew = (TH1F*)h->Clone("hnew");

Normalizing histograms

One can scale an histogram such that the bins integral is equal to the normalization parameter via TH1::Scale(Double_t norm), where norm is the desired normalization divided by the integral of the histogram.

Drawing histograms

Histograms are drawn via the THistPainter class. Each histogram has a pointer to its own painter (to be usable in a multithreaded program). Many drawing options are supported. See THistPainter::Paint() for more details.

The same histogram can be drawn with different options in different pads. When an histogram drawn in a pad is deleted, the histogram is automatically removed from the pad or pads where it was drawn. If an histogram is drawn in a pad, then filled again, the new status of the histogram will be automatically shown in the pad next time the pad is updated. One does not need to redraw the histogram. To draw the current version of an histogram in a pad, one can use

        h->DrawCopy();
This makes a clone (see Clone below) of the histogram. Once the clone is drawn, the original histogram may be modified or deleted without affecting the aspect of the clone.

One can use TH1::SetMaximum() and TH1::SetMinimum() to force a particular value for the maximum or the minimum scale on the plot. (For 1-D histograms this means the y-axis, while for 2-D histograms these functions affect the z-axis).

TH1::UseCurrentStyle() can be used to change all histogram graphics attributes to correspond to the current selected style. This function must be called for each histogram. In case one reads and draws many histograms from a file, one can force the histograms to inherit automatically the current graphics style by calling before gROOT->ForceStyle().

Setting Drawing histogram contour levels (2-D hists only)

By default contours are automatically generated at equidistant intervals. A default value of 20 levels is used. This can be modified via TH1::SetContour() or TH1::SetContourLevel(). the contours level info is used by the drawing options "cont", "surf", and "lego".

Setting histogram graphics attributes

The histogram classes inherit from the attribute classes: TAttLine, TAttFill, and TAttMarker. See the member functions of these classes for the list of options.

Giving titles to the X, Y and Z axis

       h->GetXaxis()->SetTitle("X axis title");
       h->GetYaxis()->SetTitle("Y axis title");
The histogram title and the axis titles can be any TLatex string. The titles are part of the persistent histogram. It is also possible to specify the histogram title and the axis titles at creation time. These titles can be given in the "title" parameter. They must be separated by ";":
        TH1F* h=new TH1F("h", "Histogram title;X Axis;Y Axis;Z Axis", 100, 0, 1);
Any title can be omitted:
        TH1F* h=new TH1F("h", "Histogram title;;Y Axis", 100, 0, 1);
        TH1F* h=new TH1F("h", ";;Y Axis", 100, 0, 1);
The method SetTitle has the same syntax:

        h->SetTitle("Histogram title;Another X title Axis");

Saving/Reading histograms to/from a ROOT file

The following statements create a ROOT file and store an histogram on the file. Because TH1 derives from TNamed, the key identifier on the file is the histogram name:
        TFile f("histos.root", "new");
        TH1F h1("hgaus", "histo from a gaussian", 100, -3, 3);
        h1.FillRandom("gaus", 10000);
        h1->Write();
To read this histogram in another Root session, do:
        TFile f("histos.root");
        TH1F *h = (TH1F*)f.Get("hgaus");
One can save all histograms in memory to the file by:
        file->Write();

Miscelaneous operations

        TH1::KolmogorovTest(): statistical test of compatibility in shape
                             between two histograms
        TH1::Smooth() smooths the bin contents of a 1-d histogram
        TH1::Integral() returns the integral of bin contents in a given bin range
        TH1::GetMean(int axis) returns the mean value along axis
        TH1::GetRMS(int axis)  returns the sigma distribution along axis
        TH1::GetEntries() returns the number of entries
        TH1::Reset() resets the bin contents and errors of an histogram
 

Function Members (Methods)

public:
TH1(const TH1&)
virtual~TH1()
voidTObject::AbstractMethod(const char* method) const
virtual Bool_tAdd(const TH1* h1, Double_t c1 = 1)
virtual Bool_tAdd(TF1* h1, Double_t c1 = 1, Option_t* option = "")
virtual Bool_tAdd(const TH1* h, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1)MENU
virtual voidAddBinContent(Int_t bin)
virtual voidAddBinContent(Int_t bin, Double_t w)
static voidAddDirectory(Bool_t add = kTRUE)
static Bool_tAddDirectoryStatus()
virtual Double_tAndersonDarlingTest(const TH1* h2, Option_t* option = "") const
virtual Double_tAndersonDarlingTest(const TH1* h2, Double_t& advalue) const
virtual voidTObject::AppendPad(Option_t* option = "")
virtual voidBrowse(TBrowser* b)
virtual Int_tBufferEmpty(Int_t action = 0)
virtual Double_tChi2Test(const TH1* h2, Option_t* option = "UU", Double_t* res = 0) const
virtual Double_tChi2TestX(const TH1* h2, Double_t& chi2, Int_t& ndf, Int_t& igood, Option_t* option = "UU", Double_t* res = 0) const
virtual Double_tChisquare(TF1* f1, Option_t* option = "") const
static TClass*Class()
virtual const char*TObject::ClassName() const
virtual voidTNamed::Clear(Option_t* option = "")
virtual TObject*TNamed::Clone(const char* newname = "") const
virtual Int_tTNamed::Compare(const TObject* obj) const
virtual Double_tComputeIntegral(Bool_t onlyPositive = false)
virtual voidCopy(TObject& hnew) const
virtual voidTObject::Delete(Option_t* option = "")MENU
virtual voidDirectoryAutoAdd(TDirectory*)
Int_tTAttLine::DistancetoLine(Int_t px, Int_t py, Double_t xp1, Double_t yp1, Double_t xp2, Double_t yp2)
virtual Int_tDistancetoPrimitive(Int_t px, Int_t py)
virtual Bool_tDivide(const TH1* h1)
virtual Bool_tDivide(TF1* f1, Double_t c1 = 1)
virtual Bool_tDivide(const TH1* h1, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1, Option_t* option = "")MENU
virtual voidDraw(Option_t* option = "")
virtual voidTObject::DrawClass() constMENU
virtual TObject*TObject::DrawClone(Option_t* option = "") constMENU
virtual TH1*DrawCopy(Option_t* option = "") const
virtual TH1*DrawNormalized(Option_t* option = "", Double_t norm = 1) const
virtual voidDrawPanel()MENU
virtual voidTObject::Dump() constMENU
virtual voidTObject::Error(const char* method, const char* msgfmt) const
virtual voidEval(TF1* f1, Option_t* option = "")
virtual voidTObject::Execute(const char* method, const char* params, Int_t* error = 0)
virtual voidTObject::Execute(TMethod* method, TObjArray* params, Int_t* error = 0)
virtual voidExecuteEvent(Int_t event, Int_t px, Int_t py)
virtual voidTObject::Fatal(const char* method, const char* msgfmt) const
virtual TH1*FFT(TH1* h_output, Option_t* option)
virtual Int_tFill(Double_t x)
virtual Int_tFill(Double_t x, Double_t w)
virtual Int_tFill(const char* name, Double_t w)
virtual voidTNamed::FillBuffer(char*& buffer)
virtual voidFillN(Int_t ntimes, const Double_t* x, const Double_t* w, Int_t stride = 1)
virtual voidFillN(Int_t, const Double_t*, const Double_t*, const Double_t*, Int_t)
virtual voidFillRandom(const char* fname, Int_t ntimes = 5000)
virtual voidFillRandom(TH1* h, Int_t ntimes = 5000)
virtual Int_tFindBin(Double_t x, Double_t y = 0, Double_t z = 0)
virtual Int_tFindFirstBinAbove(Double_t threshold = 0, Int_t axis = 1) const
virtual Int_tFindFixBin(Double_t x, Double_t y = 0, Double_t z = 0) const
virtual Int_tFindLastBinAbove(Double_t threshold = 0, Int_t axis = 1) const
virtual TObject*FindObject(const char* name) const
virtual TObject*FindObject(const TObject* obj) const
virtual TFitResultPtrFit(const char* formula, Option_t* option = "", Option_t* goption = "", Double_t xmin = 0, Double_t xmax = 0)MENU
virtual TFitResultPtrFit(TF1* f1, Option_t* option = "", Option_t* goption = "", Double_t xmin = 0, Double_t xmax = 0)
static Int_tFitOptionsMake(Option_t* option, Foption_t& Foption)
virtual voidFitPanel()MENU
TH1*GetAsymmetry(TH1* h2, Double_t c2 = 1, Double_t dc2 = 0)
virtual Color_tGetAxisColor(Option_t* axis = "X") const
virtual Float_tGetBarOffset() const
virtual Float_tGetBarWidth() const
virtual Int_tGetBin(Int_t binx, Int_t biny = 0, Int_t binz = 0) const
virtual Double_tGetBinCenter(Int_t bin) const
virtual Double_tGetBinContent(Int_t bin) const
virtual Double_tGetBinContent(Int_t binx, Int_t biny) const
virtual Double_tGetBinContent(Int_t binx, Int_t biny, Int_t binz) const
virtual Double_tGetBinError(Int_t bin) const
virtual Double_tGetBinError(Int_t binx, Int_t biny) const
virtual Double_tGetBinError(Int_t binx, Int_t biny, Int_t binz) const
virtual Double_tGetBinErrorLow(Int_t bin) const
virtual TH1::EBinErrorOptGetBinErrorOption() const
virtual Double_tGetBinErrorUp(Int_t bin) const
virtual Double_tGetBinLowEdge(Int_t bin) const
virtual Double_tGetBinWidth(Int_t bin) const
virtual Double_tGetBinWithContent(Double_t c, Int_t& binx, Int_t firstx = 0, Int_t lastx = 0, Double_t maxdiff = 0) const
virtual voidGetBinXYZ(Int_t binglobal, Int_t& binx, Int_t& biny, Int_t& binz) const
const Double_t*GetBuffer() const
Int_tGetBufferLength() const
Int_tGetBufferSize() const
virtual Double_tGetCellContent(Int_t binx, Int_t biny) const
virtual Double_tGetCellError(Int_t binx, Int_t biny) const
virtual voidGetCenter(Double_t* center) const
virtual Int_tGetContour(Double_t* levels = 0)
virtual Double_tGetContourLevel(Int_t level) const
virtual Double_tGetContourLevelPad(Int_t level) const
TH1*GetCumulative(Bool_t forward = kTRUE, const char* suffix = "_cumulative") const
static Int_tGetDefaultBufferSize()
static Bool_tGetDefaultSumw2()
virtual Int_tGetDimension() const
TDirectory*GetDirectory() const
virtual Option_t*TObject::GetDrawOption() const
static Long_tTObject::GetDtorOnly()
virtual Double_tGetEffectiveEntries() const
virtual Double_tGetEntries() const
virtual Color_tTAttFill::GetFillColor() const
virtual Style_tTAttFill::GetFillStyle() const
virtual TF1*GetFunction(const char* name) const
virtual const char*TObject::GetIconName() const
virtual Double_t*GetIntegral()
virtual Double_tGetKurtosis(Int_t axis = 1) const
virtual Color_tGetLabelColor(Option_t* axis = "X") const
virtual Style_tGetLabelFont(Option_t* axis = "X") const
virtual Float_tGetLabelOffset(Option_t* axis = "X") const
virtual Float_tGetLabelSize(Option_t* axis = "X") const
virtual Color_tTAttLine::GetLineColor() const
virtual Style_tTAttLine::GetLineStyle() const
virtual Width_tTAttLine::GetLineWidth() const
TList*GetListOfFunctions() const
virtual voidGetLowEdge(Double_t* edge) const
virtual Color_tTAttMarker::GetMarkerColor() const
virtual Size_tTAttMarker::GetMarkerSize() const
virtual Style_tTAttMarker::GetMarkerStyle() const
virtual Double_tGetMaximum(Double_t maxval = FLT_MAX) const
virtual Int_tGetMaximumBin() const
virtual Int_tGetMaximumBin(Int_t& locmax, Int_t& locmay, Int_t& locmaz) const
virtual Double_tGetMaximumStored() const
virtual Double_tGetMean(Int_t axis = 1) const
virtual Double_tGetMeanError(Int_t axis = 1) const
virtual Double_tGetMinimum(Double_t minval = -FLT_MAX) const
virtual Int_tGetMinimumBin() const
virtual Int_tGetMinimumBin(Int_t& locmix, Int_t& locmiy, Int_t& locmiz) const
virtual Double_tGetMinimumStored() const
virtual const char*TNamed::GetName() const
virtual Int_tGetNbinsX() const
virtual Int_tGetNbinsY() const
virtual Int_tGetNbinsZ() const
virtual Int_tGetNdivisions(Option_t* axis = "X") const
virtual Double_tGetNormFactor() const
virtual char*GetObjectInfo(Int_t px, Int_t py) const
static Bool_tTObject::GetObjectStat()
virtual Option_t*GetOption() const
TVirtualHistPainter*GetPainter(Option_t* option = "")
virtual Int_tGetQuantiles(Int_t nprobSum, Double_t* q, const Double_t* probSum = 0)
virtual Double_tGetRandom() const
virtual Double_tGetRMS(Int_t axis = 1) const
virtual Double_tGetRMSError(Int_t axis = 1) const
virtual Double_tGetSkewness(Int_t axis = 1) const
virtual voidGetStats(Double_t* stats) const
Double_tGetStdDev(Int_t axis = 1) const
Double_tGetStdDevError(Int_t axis = 1) const
virtual Double_tGetSumOfWeights() const
virtual TArrayD*GetSumw2()
virtual const TArrayD*GetSumw2() const
virtual Int_tGetSumw2N() const
virtual Float_tGetTickLength(Option_t* axis = "X") const
virtual const char*TNamed::GetTitle() const
virtual Style_tGetTitleFont(Option_t* axis = "X") const
virtual Float_tGetTitleOffset(Option_t* axis = "X") const
virtual Float_tGetTitleSize(Option_t* axis = "X") const
virtual UInt_tTObject::GetUniqueID() const
TAxis*GetXaxis() const
TAxis*GetYaxis() const
TAxis*GetZaxis() const
virtual Bool_tTObject::HandleTimer(TTimer* timer)
virtual ULong_tTNamed::Hash() const
virtual voidTObject::Info(const char* method, const char* msgfmt) const
virtual Bool_tTObject::InheritsFrom(const char* classname) const
virtual Bool_tTObject::InheritsFrom(const TClass* cl) const
virtual voidTObject::Inspect() constMENU
virtual Double_tIntegral(Option_t* option = "") const
virtual Double_tIntegral(Int_t binx1, Int_t binx2, Option_t* option = "") const
virtual Double_tIntegralAndError(Int_t binx1, Int_t binx2, Double_t& err, Option_t* option = "") const
virtual Double_tInterpolate(Double_t x)
virtual Double_tInterpolate(Double_t x, Double_t y)
virtual Double_tInterpolate(Double_t x, Double_t y, Double_t z)
voidTObject::InvertBit(UInt_t f)
virtual TClass*IsA() const
Bool_tIsBinOverflow(Int_t bin) const
Bool_tIsBinUnderflow(Int_t bin) const
virtual Bool_tTObject::IsEqual(const TObject* obj) const
virtual Bool_tTObject::IsFolder() const
Bool_tTObject::IsOnHeap() const
virtual Bool_tTNamed::IsSortable() const
virtual Bool_tTAttFill::IsTransparent() const
Bool_tTObject::IsZombie() const
virtual Double_tKolmogorovTest(const TH1* h2, Option_t* option = "") const
virtual voidLabelsDeflate(Option_t* axis = "X")
virtual voidLabelsInflate(Option_t* axis = "X")
virtual voidLabelsOption(Option_t* option = "h", Option_t* axis = "X")
virtual voidTNamed::ls(Option_t* option = "") const
voidTObject::MayNotUse(const char* method) const
virtual Long64_tMerge(TCollection* list)
virtual voidTAttLine::Modify()
virtual Bool_tMultiply(const TH1* h1)
virtual Bool_tMultiply(TF1* h1, Double_t c1 = 1)
virtual Bool_tMultiply(const TH1* h1, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1, Option_t* option = "")MENU
virtual Bool_tTObject::Notify()
voidTObject::Obsolete(const char* method, const char* asOfVers, const char* removedFromVers) const
static voidTObject::operator delete(void* ptr)
static voidTObject::operator delete(void* ptr, void* vp)
static voidTObject::operator delete[](void* ptr)
static voidTObject::operator delete[](void* ptr, void* vp)
void*TObject::operator new(size_t sz)
void*TObject::operator new(size_t sz, void* vp)
void*TObject::operator new[](size_t sz)
void*TObject::operator new[](size_t sz, void* vp)
virtual voidPaint(Option_t* option = "")
virtual voidTObject::Pop()
virtual voidPrint(Option_t* option = "") const
virtual voidPutStats(Double_t* stats)
virtual Int_tTObject::Read(const char* name)
virtual TH1*Rebin(Int_t ngroup = 2, const char* newname = "", const Double_t* xbins = 0)MENU
virtual voidRebinAxis(Double_t x, TAxis* axis)
virtual TH1*RebinX(Int_t ngroup = 2, const char* newname = "")
virtual voidRebuild(Option_t* option = "")
virtual voidRecursiveRemove(TObject* obj)
virtual voidReset(Option_t* option = "")
virtual voidTAttFill::ResetAttFill(Option_t* option = "")
virtual voidTAttLine::ResetAttLine(Option_t* option = "")
virtual voidTAttMarker::ResetAttMarker(Option_t* toption = "")
voidTObject::ResetBit(UInt_t f)
virtual voidResetStats()
virtual voidTObject::SaveAs(const char* filename = "", Option_t* option = "") constMENU
virtual voidTAttFill::SaveFillAttributes(ostream& out, const char* name, Int_t coldef = 1, Int_t stydef = 1001)
virtual voidTAttLine::SaveLineAttributes(ostream& out, const char* name, Int_t coldef = 1, Int_t stydef = 1, Int_t widdef = 1)
virtual voidTAttMarker::SaveMarkerAttributes(ostream& out, const char* name, Int_t coldef = 1, Int_t stydef = 1, Int_t sizdef = 1)
virtual voidSavePrimitive(ostream& out, Option_t* option = "")
virtual voidScale(Double_t c1 = 1, Option_t* option = "")
virtual voidSetAxisColor(Color_t color = 1, Option_t* axis = "X")
virtual voidSetAxisRange(Double_t xmin, Double_t xmax, Option_t* axis = "X")
virtual voidSetBarOffset(Float_t offset = 0.25)
virtual voidSetBarWidth(Float_t width = 0.5)
virtual voidSetBinContent(Int_t bin, Double_t content)
virtual voidSetBinContent(Int_t binx, Int_t biny, Double_t content)
virtual voidSetBinContent(Int_t binx, Int_t biny, Int_t binz, Double_t content)
virtual voidSetBinError(Int_t bin, Double_t error)
virtual voidSetBinError(Int_t binx, Int_t biny, Double_t error)
virtual voidSetBinError(Int_t binx, Int_t biny, Int_t binz, Double_t error)
virtual voidSetBinErrorOption(TH1::EBinErrorOpt type)
virtual voidSetBins(Int_t nx, const Double_t* xBins)
virtual voidSetBins(Int_t nx, Double_t xmin, Double_t xmax)
virtual voidSetBins(Int_t nx, const Double_t* xBins, Int_t ny, const Double_t* yBins)
virtual voidSetBins(Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax)
virtual voidSetBins(Int_t nx, const Double_t* xBins, Int_t ny, const Double_t* yBins, Int_t nz, const Double_t* zBins)
virtual voidSetBins(Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax, Int_t nz, Double_t zmin, Double_t zmax)
virtual voidSetBinsLength(Int_t = -1)
voidTObject::SetBit(UInt_t f)
voidTObject::SetBit(UInt_t f, Bool_t set)
virtual voidSetBuffer(Int_t buffersize, Option_t* option = "")
virtual voidSetCellContent(Int_t binx, Int_t biny, Double_t content)
virtual voidSetCellError(Int_t binx, Int_t biny, Double_t content)
virtual voidSetContent(const Double_t* content)
virtual voidSetContour(Int_t nlevels, const Double_t* levels = 0)
virtual voidSetContourLevel(Int_t level, Double_t value)
static voidSetDefaultBufferSize(Int_t buffersize = 1000)
static voidSetDefaultSumw2(Bool_t sumw2 = kTRUE)
virtual voidSetDirectory(TDirectory* dir)
virtual voidTObject::SetDrawOption(Option_t* option = "")MENU
static voidTObject::SetDtorOnly(void* obj)
virtual voidSetEntries(Double_t n)
virtual voidSetError(const Double_t* error)
virtual voidTAttFill::SetFillAttributes()MENU
virtual voidTAttFill::SetFillColor(Color_t fcolor)
virtual voidTAttFill::SetFillColorAlpha(Color_t fcolor, Float_t falpha)
virtual voidTAttFill::SetFillStyle(Style_t fstyle)
virtual voidSetLabelColor(Color_t color = 1, Option_t* axis = "X")
virtual voidSetLabelFont(Style_t font = 62, Option_t* axis = "X")
virtual voidSetLabelOffset(Float_t offset = 0.005, Option_t* axis = "X")
virtual voidSetLabelSize(Float_t size = 0.02, Option_t* axis = "X")
virtual voidTAttLine::SetLineAttributes()MENU
virtual voidTAttLine::SetLineColor(Color_t lcolor)
virtual voidTAttLine::SetLineColorAlpha(Color_t lcolor, Float_t lalpha)
virtual voidTAttLine::SetLineStyle(Style_t lstyle)
virtual voidTAttLine::SetLineWidth(Width_t lwidth)
virtual voidTAttMarker::SetMarkerAttributes()MENU
virtual voidTAttMarker::SetMarkerColor(Color_t mcolor = 1)
virtual voidTAttMarker::SetMarkerColorAlpha(Color_t mcolor, Float_t malpha)
virtual voidTAttMarker::SetMarkerSize(Size_t msize = 1)
virtual voidTAttMarker::SetMarkerStyle(Style_t mstyle = 1)
virtual voidSetMaximum(Double_t maximum = -1111)MENU
virtual voidSetMinimum(Double_t minimum = -1111)MENU
virtual voidSetName(const char* name)MENU
virtual voidSetNameTitle(const char* name, const char* title)
virtual voidSetNdivisions(Int_t n = 510, Option_t* axis = "X")
virtual voidSetNormFactor(Double_t factor = 1)
static voidTObject::SetObjectStat(Bool_t stat)
virtual voidSetOption(Option_t* option = " ")
virtual voidSetStats(Bool_t stats = kTRUE)MENU
virtual voidSetTickLength(Float_t length = 0.02, Option_t* axis = "X")
virtual voidSetTitle(const char* title)MENU
virtual voidSetTitleFont(Style_t font = 62, Option_t* axis = "X")
virtual voidSetTitleOffset(Float_t offset = 1, Option_t* axis = "X")
virtual voidSetTitleSize(Float_t size = 0.02, Option_t* axis = "X")
virtual voidTObject::SetUniqueID(UInt_t uid)
virtual voidSetXTitle(const char* title)
virtual voidSetYTitle(const char* title)
virtual voidSetZTitle(const char* title)
virtual TH1*ShowBackground(Int_t niter = 20, Option_t* option = "same")MENU
virtual voidShowMembers(TMemberInspector&)
virtual Int_tShowPeaks(Double_t sigma = 2, Option_t* option = "", Double_t threshold = 0.05)MENU
virtual Int_tTNamed::Sizeof() const
virtual voidSmooth(Int_t ntimes = 1, Option_t* option = "")MENU
static voidSmoothArray(Int_t NN, Double_t* XX, Int_t ntimes = 1)
static voidStatOverflows(Bool_t flag = kTRUE)
virtual voidStreamer(TBuffer&)
voidStreamerNVirtual(TBuffer& ClassDef_StreamerNVirtual_b)
virtual voidSumw2(Bool_t flag = kTRUE)
virtual voidTObject::SysError(const char* method, const char* msgfmt) const
Bool_tTObject::TestBit(UInt_t f) const
Int_tTObject::TestBits(UInt_t f) const
static TH1*TransformHisto(TVirtualFFT* fft, TH1* h_output, Option_t* option)
virtual voidUseCurrentStyle()
virtual voidTObject::Warning(const char* method, const char* msgfmt) const
virtual Int_tTObject::Write(const char* name = 0, Int_t option = 0, Int_t bufsize = 0)
virtual Int_tTObject::Write(const char* name = 0, Int_t option = 0, Int_t bufsize = 0) const
protected:
TH1()
TH1(const char* name, const char* title, Int_t nbinsx, const Float_t* xbins)
TH1(const char* name, const char* title, Int_t nbinsx, const Double_t* xbins)
TH1(const char* name, const char* title, Int_t nbinsx, Double_t xlow, Double_t xup)
virtual Int_tBufferFill(Double_t x, Double_t w)
static boolCheckAxisLimits(const TAxis* a1, const TAxis* a2)
static boolCheckBinLabels(const TAxis* a1, const TAxis* a2)
static boolCheckBinLimits(const TAxis* a1, const TAxis* a2)
static boolCheckConsistency(const TH1* h1, const TH1* h2)
static boolCheckConsistentSubAxes(const TAxis* a1, Int_t firstBin1, Int_t lastBin1, const TAxis* a2, Int_t firstBin2 = 0, Int_t lastBin2 = 0)
static boolCheckEqualAxes(const TAxis* a1, const TAxis* a2)
virtual voidTObject::DoError(int level, const char* location, const char* fmt, va_list va) const
virtual voidDoFillN(Int_t ntimes, const Double_t* x, const Double_t* w, Int_t stride = 1)
virtual Double_tDoIntegral(Int_t ix1, Int_t ix2, Int_t iy1, Int_t iy2, Int_t iz1, Int_t iz2, Double_t& err, Option_t* opt, Bool_t doerr = kFALSE) const
virtual Bool_tFindNewAxisLimits(const TAxis* axis, const Double_t point, Double_t& newMin, Double_t& newMax)
voidTObject::MakeZombie()
static Bool_tRecomputeAxisLimits(TAxis& destAxis, const TAxis& anAxis)
static Bool_tSameLimitsAndNBins(const TAxis& axis1, const TAxis& axis2)
virtual voidSavePrimitiveHelp(ostream& out, const char* hname, Option_t* option = "")
private:
Int_tAxisChoice(Option_t* axis) const
voidBuild()
TH1&operator=(const TH1&)

Data Members

public:
enum EBinErrorOpt { kNormal
kPoisson
kPoisson2
};
enum { kNoStats
kUserContour
kCanRebin
kLogX
kIsZoomed
kNoTitle
kIsAverage
kNstat
};
enum TObject::EStatusBits { kCanDelete
kMustCleanup
kObjInCanvas
kIsReferenced
kHasUUID
kCannotPick
kNoContextMenu
kInvalidObject
};
enum TObject::[unnamed] { kIsOnHeap
kNotDeleted
kZombie
kBitMask
kSingleKey
kOverwrite
kWriteDelete
};
protected:
Short_tfBarOffset(1000*offset) for bar charts or legos
Short_tfBarWidth(1000*width) for bar charts or legos
TH1::EBinErrorOptfBinStatErrOptoption for bin statistical errors
Double_t*fBuffer[fBufferSize] entry buffer
Int_tfBufferSizefBuffer size
TArrayDfContourArray to display contour levels
Int_tfDimension!Histogram dimension (1, 2 or 3 dim)
TDirectory*fDirectory!Pointer to directory holding this histogram
Double_tfEntriesNumber of entries
Color_tTAttFill::fFillColorfill area color
Style_tTAttFill::fFillStylefill area style
TList*fFunctions->Pointer to list of functions (fits and user)
Double_t*fIntegral!Integral of bins used by GetRandom
Color_tTAttLine::fLineColorline color
Style_tTAttLine::fLineStyleline style
Width_tTAttLine::fLineWidthline width
Color_tTAttMarker::fMarkerColorMarker color index
Size_tTAttMarker::fMarkerSizeMarker size
Style_tTAttMarker::fMarkerStyleMarker style
Double_tfMaximumMaximum value for plotting
Double_tfMinimumMinimum value for plotting
TStringTNamed::fNameobject identifier
Int_tfNcellsnumber of bins(1D), cells (2D) +U/Overflows
Double_tfNormFactorNormalization factor
TStringfOptionhistogram options
TVirtualHistPainter*fPainter!pointer to histogram painter
TArrayDfSumw2Array of sum of squares of weights
TStringTNamed::fTitleobject title
Double_tfTsumwTotal Sum of weights
Double_tfTsumw2Total Sum of squares of weights
Double_tfTsumwxTotal Sum of weight*X
Double_tfTsumwx2Total Sum of weight*X*X
TAxisfXaxisX axis descriptor
TAxisfYaxisY axis descriptor
TAxisfZaxisZ axis descriptor
static Bool_tfgAddDirectory!flag to add histograms to the directory
static Int_tfgBufferSize!default buffer size for automatic histograms
static Bool_tfgDefaultSumw2!flag to call TH1::Sumw2 automatically at histogram creation time
static Bool_tfgStatOverflows!flag to use under/overflows in statistics

Class Charts

Inheritance Inherited Members Includes Libraries
Class Charts

Function documentation

TH1()
   -*-*-*-*-*-*-*-*-*Histogram default constructor*-*-*-*-*-*-*-*-*-*-*-*-*

~TH1()
   -*-*-*-*-*-*-*-*-*Histogram default destructor*-*-*-*-*-*-*-*-*-*-*-*-*-*

TH1(const char* name, const char* title, Int_t nbinsx, Double_t xlow, Double_t xup)
   -*-*-*-*-*-*-*Normal constructor for fix bin size histograms*-*-*-*-*-*-*


     Creates the main histogram structure:
        name   : name of histogram (avoid blanks)
        title  : histogram title
                 if title is of the form "stringt;stringx;stringy;stringz"
                 the histogram title is set to stringt,
                 the x axis title to stringy, the y axis title to stringy, etc.
        nbins  : number of bins
        xlow   : low edge of first bin
        xup    : upper edge of last bin (not included in last bin)

      When an histogram is created, it is automatically added to the list
      of special objects in the current directory.
      To find the pointer to this histogram in the current directory
      by its name, do:
      TH1F *h1 = (TH1F*)gDirectory->FindObject(name);

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
TH1(const char* name, const char* title, Int_t nbinsx, const Float_t* xbins)
   -*-*-*-*-*Normal constructor for variable bin size histograms*-*-*-*-*-*-*


  Creates the main histogram structure:
     name   : name of histogram (avoid blanks)
     title  : histogram title
              if title is of the form "stringt;stringx;stringy;stringz"
              the histogram title is set to stringt,
              the x axis title to stringx, the y axis title to stringy, etc.
     nbins  : number of bins
     xbins  : array of low-edges for each bin
              This is an array of size nbins+1

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
TH1(const char* name, const char* title, Int_t nbinsx, const Double_t* xbins)
   -*-*-*-*-*Normal constructor for variable bin size histograms*-*-*-*-*-*-*


  Creates the main histogram structure:
     name   : name of histogram (avoid blanks)
     title  : histogram title
              if title is of the form "stringt;stringx;stringy;stringz"
              the histogram title is set to stringt,
              the x axis title to stringx, the y axis title to stringy, etc.
     nbins  : number of bins
     xbins  : array of low-edges for each bin
              This is an array of size nbins+1

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
TH1(const TH1& )
 Copy constructor.
 The list of functions is not copied. (Use Clone if needed)
Bool_t AddDirectoryStatus()
static function: cannot be inlined on Windows/NT
void Browse(TBrowser* b)
 Browe the Histogram object.
void Build()
   -*-*-*-*-*-*-*-*Creates histogram basic data structure*-*-*-*-*-*-*-*-*-*

Bool_t Add(TF1* h1, Double_t c1 = 1, Option_t* option = "")
 Performs the operation: this = this + c1*f1
 if errors are defined (see TH1::Sumw2), errors are also recalculated.

 By default, the function is computed at the centre of the bin.
 if option "I" is specified (1-d histogram only), the integral of the
 function in each bin is used instead of the value of the function at
 the centre of the bin.
 Only bins inside the function range are recomputed.
 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Add

 The function return kFALSE if the Add operation failed
Bool_t Add(const TH1* h1, Double_t c1 = 1)
 Performs the operation: this = this + c1*h1
 if errors are defined (see TH1::Sumw2), errors are also recalculated.
 Note that if h1 has Sumw2 set, Sumw2 is automatically called for this
 if not already set.
 Note also that adding histogram with labels is not supported, histogram will be
 added merging them by bin number independently of the labels.
 For adding histogram with labels one should use TH1::Merge

 SPECIAL CASE (Average/Efficiency histograms)
 For histograms representing averages or efficiencies, one should compute the average
 of the two histograms and not the sum. One can mark a histogram to be an average
 histogram by setting its bit kIsAverage with
    myhist.SetBit(TH1::kIsAverage);
 Note that the two histograms must have their kIsAverage bit set

 IMPORTANT NOTE1: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Add

 IMPORTANT NOTE2: if h1 has a normalisation factor, the normalisation factor
 is used , ie  this = this + c1*factor*h1
 Use the other TH1::Add function if you do not want this feature

 The function return kFALSE if the Add operation failed
Bool_t Add(const TH1* h, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1)
   -*-*-*Replace contents of this histogram by the addition of h1 and h2*-*-*


   this = c1*h1 + c2*h2
   if errors are defined (see TH1::Sumw2), errors are also recalculated
   Note that if h1 or h2 have Sumw2 set, Sumw2 is automatically called for this
   if not already set.
   Note also that adding histogram with labels is not supported, histogram will be
   added merging them by bin number independently of the labels.
   For adding histogram ith labels one should use TH1::Merge

 SPECIAL CASE (Average/Efficiency histograms)
 For histograms representing averages or efficiencies, one should compute the average
 of the two histograms and not the sum. One can mark a histogram to be an average
 histogram by setting its bit kIsAverage with
    myhist.SetBit(TH1::kIsAverage);
 Note that the two histograms must have their kIsAverage bit set

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Add

ANOTHER SPECIAL CASE : h1 = h2 and c2 < 0
 do a scaling   this = c1 * h1 / (bin Volume)

 The function returns kFALSE if the Add operation failed
void AddBinContent(Int_t bin)
   -*-*-*-*-*-*-*-*Increment bin content by 1*-*-*-*-*-*-*-*-*-*-*-*-*-*

void AddBinContent(Int_t bin, Double_t w)
   -*-*-*-*-*-*-*-*Increment bin content by a weight w*-*-*-*-*-*-*-*-*-*-*

void AddDirectory(Bool_t add = kTRUE)
 Sets the flag controlling the automatic add of histograms in memory

 By default (fAddDirectory = kTRUE), histograms are automatically added
 to the list of objects in memory.
 Note that one histogram can be removed from its support directory
 by calling h->SetDirectory(0) or h->SetDirectory(dir) to add it
 to the list of objects in the directory dir.

  NOTE that this is a static function. To call it, use;
     TH1::AddDirectory
Int_t BufferEmpty(Int_t action = 0)
 Fill histogram with all entries in the buffer.
 action = -1 histogram is reset and refilled from the buffer (called by THistPainter::Paint)
 action =  0 histogram is reset and filled from the buffer. When the histogram is filled from the
             buffer the value fBuffer[0] is set to a negative number (= - number of entries)
             When calling with action == 0 the histogram is NOT refilled when fBuffer[0] is < 0
             While when calling with action = -1 the histogram is reset and ALWAYS refilled independently if
             the histogram was filled before. This is needed when drawing the histogram

 action =  1 histogram is filled and buffer is deleted
             The buffer is automatically deleted when filling the histogram and the entries is
             larger than the buffer size

Int_t BufferFill(Double_t x, Double_t w)
 accumulate arguments in buffer. When buffer is full, empty the buffer
 fBuffer[0] = number of entries in buffer
 fBuffer[1] = w of first entry
 fBuffer[2] = x of first entry
bool CheckBinLimits(const TAxis* a1, const TAxis* a2)
bool CheckBinLabels(const TAxis* a1, const TAxis* a2)
 check that axis have same labels
bool CheckAxisLimits(const TAxis* a1, const TAxis* a2)
 Check that the axis limits of the histograms are the same
 if a first and last bin is passed the axis is compared between the given range
bool CheckEqualAxes(const TAxis* a1, const TAxis* a2)
 Check that the axis are the same
bool CheckConsistentSubAxes(const TAxis* a1, Int_t firstBin1, Int_t lastBin1, const TAxis* a2, Int_t firstBin2 = 0, Int_t lastBin2 = 0)
 Check that two sub axis are the same
 the limits are defined by first bin and last bin
 N.B. no check is done in this case for variable bins
bool CheckConsistency(const TH1* h1, const TH1* h2)
 Check histogram compatibility
Double_t Chi2Test(const TH1* h2, Option_t* option = "UU", Double_t* res = 0) const
 #chi^{2} test for comparing weighted and unweighted histograms

 Function: Returns p-value. Other return values are specified by the 3rd parameter <br>

 Parameters:

    - h2: the second histogram
    - option:
       o "UU" = experiment experiment comparison (unweighted-unweighted)
       o "UW" = experiment MC comparison (unweighted-weighted). Note that
          the first histogram should be unweighted
       o "WW" = MC MC comparison (weighted-weighted)
       o "NORM" = to be used when one or both of the histograms is scaled
                  but the histogram originally was unweighted
       o by default underflows and overlows are not included:
          * "OF" = overflows included
          * "UF" = underflows included
       o "P" = print chi2, ndf, p_value, igood
       o "CHI2" = returns chi2 instead of p-value
       o "CHI2/NDF" = returns #chi^{2}/ndf
    - res: not empty - computes normalized residuals and returns them in
      this array

 The current implementation is based on the papers #chi^{2} test for comparison
 of weighted and unweighted histograms" in Proceedings of PHYSTAT05 and
 "Comparison weighted and unweighted histograms", arXiv:physics/0605123
 by N.Gagunashvili. This function has been implemented by Daniel Haertl in August 2006.

 Introduction:

   A frequently used technique in data analysis is the comparison of
   histograms. First suggested by Pearson [1] the #chi^{2} test of
   homogeneity is used widely for comparing usual (unweighted) histograms.
   This paper describes the implementation modified #chi^{2} tests
   for comparison of weighted and unweighted  histograms and two weighted
   histograms [2] as well as usual Pearson's #chi^{2} test for
   comparison two usual (unweighted) histograms.

 Overview:

   Comparison of two histograms expect hypotheses that two histograms
   represent identical distributions. To make a decision p-value should
   be calculated. The hypotheses of identity is rejected if the p-value is
   lower then some significance level. Traditionally significance levels
   0.1, 0.05 and 0.01 are used. The comparison procedure should include an
   analysis of the residuals which is often helpful in identifying the
   bins of histograms responsible for a significant overall #chi^{2} value.
   Residuals are the difference between bin contents and expected bin
   contents. Most convenient for analysis are the normalized residuals. If
   hypotheses of identity are valid then normalized residuals are
   approximately independent and identically distributed random variables
   having N(0,1) distribution. Analysis of residuals expect test of above
   mentioned properties of residuals. Notice that indirectly the analysis
   of residuals increase the power of #chi^{2} test.

 Methods of comparison:

  #chi^{2} test for comparison two (unweighted) histograms:
   Let us consider two  histograms with the  same binning and the  number
   of bins equal to r. Let us denote the number of events in the ith bin
   in the first histogram as ni and as mi in the second one. The total
   number of events in the first histogram is equal to:

N = #sum_{i=1}^{r} n_{i}
   and

M = #sum_{i=1}^{r} m_{i}
   in the second histogram. The hypothesis of identity (homogeneity) [3]
   is that the two histograms represent random values with identical
   distributions. It is equivalent that there exist r constants p1,...,pr,
   such that

#sum_{i=1}^{r} p_{i}=1
    and the probability of belonging to the ith bin for some measured value
    in both experiments is equal to pi. The number of events in the ith
    bin is a random variable with a distribution approximated by a Poisson
    probability distribution

#frac{e^{-Np_{i}}(Np_{i})^{n_{i}}}{n_{i}!}
   for the first histogram and with distribution

#frac{e^{-Mp_{i}}(Mp_{i})^{m_{i}}}{m_{i}!}
   for the second histogram. If the hypothesis of homogeneity is valid,
   then the  maximum likelihood estimator of pi, i=1,...,r, is

#hat{p}_{i}= #frac{n_{i}+m_{i}}{N+M}
   and then

X^{2} = #sum_{i=1}^{r}#frac{(n_{i}-N#hat{p}_{i})^{2}}{N#hat{p}_{i}} + #sum_{i=1}^{r}#frac{(m_{i}-M#hat{p}_{i})^{2}}{M#hat{p}_{i}} = #frac{1}{MN} #sum_{i=1}^{r}#frac{(Mn_{i}-Nm_{i})^{2}}{n_{i}+m_{i}}
   has approximately a #chi^{2}_{(r-1)} distribution [3].
   The comparison procedure can include an analysis of the residuals which
   is often helpful in identifying the bins of histograms responsible for
   a significant overall #chi^{2}value. Most convenient for
   analysis are the adjusted (normalized) residuals [4]

r_{i} = #frac{n_{i}-N#hat{p}_{i}}{#sqrt{N#hat{p}_{i}}#sqrt{(1-N/(N+M))(1-(n_{i}+m_{i})/(N+M))}}
   If hypotheses of  homogeneity are valid then residuals ri are
   approximately independent and identically distributed random variables
   having N(0,1) distribution. The application of the #chi^{2} test has
   restrictions related to the value of the expected frequencies Npi,
   Mpi, i=1,...,r. A conservative rule formulated in [5] is that all the
   expectations must be 1 or greater for both histograms. In practical
   cases when expected frequencies are not known the estimated expected
   frequencies M#hat{p}_{i}, N#hat{p}_{i}, i=1,...,r  can be used.

  Unweighted and weighted histograms comparison:

   A simple modification of the ideas described above can be used for the
   comparison of the usual (unweighted) and weighted histograms. Let us
   denote the number of events in the ith bin in the unweighted
   histogram as ni and the common weight of events in the ith bin of the
   weighted histogram as wi. The total number of events in the
   unweighted histogram is equal to

N = #sum_{i=1}^{r} n_{i}
   and the total weight of events in the weighted histogram is equal to

W = #sum_{i=1}^{r} w_{i}
   Let us formulate the hypothesis of identity of an unweighted histogram
   to a weighted histogram so that there exist r constants p1,...,pr, such
   that

#sum_{i=1}^{r} p_{i} = 1
   for the unweighted histogram. The weight wi is a random variable with a
   distribution approximated by the normal probability distribution
   N(Wp_{i},#sigma_{i}^{2}) where #sigma_{i}^{2} is the variance of the weight wi.
   If we replace the variance #sigma_{i}^{2}
   with estimate s_{i}^{2} (sum of squares of weights of
   events in the ith bin) and the hypothesis of identity is valid, then the
   maximum likelihood estimator of  pi,i=1,...,r, is

#hat{p}_{i} = #frac{Ww_{i}-Ns_{i}^{2}+#sqrt{(Ww_{i}-Ns_{i}^{2})^{2}+4W^{2}s_{i}^{2}n_{i}}}{2W^{2}}
   We may then use the test statistic

X^{2} = #sum_{i=1}^{r} #frac{(n_{i}-N#hat{p}_{i})^{2}}{N#hat{p}_{i}} + #sum_{i=1}^{r} #frac{(w_{i}-W#hat{p}_{i})^{2}}{s_{i}^{2}}
   and it has approximately a #chi^{2}_{(r-1)} distribution [2]. This test, as well
   as the original one [3], has a restriction on the expected frequencies. The
   expected frequencies recommended for the weighted histogram is more than 25.
   The value of the minimal expected frequency can be decreased down to 10 for
   the case when the weights of the events are close to constant. In the case
   of a weighted histogram if the number of events is unknown, then we can
   apply this recommendation for the equivalent number of events as

n_{i}^{equiv} = #frac{ w_{i}^{2} }{ s_{i}^{2} }
   The minimal expected frequency for an unweighted histogram must be 1. Notice
   that any usual (unweighted) histogram can be considered as a weighted
   histogram with events that have constant weights equal to 1.
   The variance z_{i}^{2} of the difference between the weight wi
   and the estimated expectation value of the weight is approximately equal to:

z_{i}^{2} = Var(w_{i}-W#hat{p}_{i}) = N#hat{p}_{i}(1-N#hat{p}_{i})#left(#frac{Ws_{i}^{2}}{#sqrt{(Ns_{i}^{2}-w_{i}W)^{2}+4W^{2}s_{i}^{2}n_{i}}}#right)^{2}+#frac{s_{i}^{2}}{4}#left(1+#frac{Ns_{i}^{2}-w_{i}W}{#sqrt{(Ns_{i}^{2}-w_{i}W)^{2}+4W^{2}s_{i}^{2}n_{i}}}#right)^{2}
   The  residuals

r_{i} = #frac{w_{i}-W#hat{p}_{i}}{z_{i}}
   have approximately a normal distribution with mean equal to 0 and standard
   deviation  equal to 1.

  Two weighted histograms comparison:

   Let us denote the common  weight of events of the ith bin in the first
   histogram as w1i and as w2i in the second one. The total weight of events
   in the first histogram is equal to

W_{1} = #sum_{i=1}^{r} w_{1i}
   and

W_{2} = #sum_{i=1}^{r} w_{2i}
   in the second histogram. Let us formulate the hypothesis of identity of
   weighted histograms so that there exist r constants p1,...,pr, such that

#sum_{i=1}^{r} p_{i} = 1
   and also expectation value of weight w1i equal to W1pi and expectation value
   of weight w2i equal to W2pi. Weights in both the histograms are random
   variables with distributions which can be approximated by a normal
   probability distribution N(W_{1}p_{i},#sigma_{1i}^{2}) for the first histogram
   and by a distribution N(W_{2}p_{i},#sigma_{2i}^{2}) for the second.
   Here #sigma_{1i}^{2} and #sigma_{2i}^{2} are the variances
   of w1i and w2i with estimators s_{1i}^{2} and s_{2i}^{2} respectively.
   If the hypothesis of identity is valid, then the maximum likelihood and
   Least Square Method estimator of pi,i=1,...,r, is

#hat{p}_{i} = #frac{w_{1i}W_{1}/s_{1i}^{2}+w_{2i}W_{2} /s_{2i}^{2}}{W_{1}^{2}/s_{1i}^{2}+W_{2}^{2}/s_{2i}^{2}}
   We may then use the test statistic

X^{2} = #sum_{i=1}^{r} #frac{(w_{1i}-W_{1}#hat{p}_{i})^{2}}{s_{1i}^{2}} + #sum_{i=1}^{r} #frac{(w_{2i}-W_{2}#hat{p}_{i})^{2}}{s_{2i}^{2}} = #sum_{i=1}^{r} #frac{(W_{1}w_{2i}-W_{2}w_{1i})^{2}}{W_{1}^{2}s_{2i}^{2}+W_{2}^{2}s_{1i}^{2}}
   and it has approximately a #chi^{2}_{(r-1)} distribution [2].
   The normalized or studentised residuals [6]

r_{i} = #frac{w_{1i}-W_{1}#hat{p}_{i}}{s_{1i}#sqrt{1 - #frac{1}{(1+W_{2}^{2}s_{1i}^{2}/W_{1}^{2}s_{2i}^{2})}}}
   have approximately a normal distribution with mean equal to 0 and standard
   deviation 1. A recommended minimal expected frequency is equal to 10 for
   the proposed test.

 Numerical examples:

   The method described herein is now illustrated with an example.
   We take a distribution

#phi(x) = #frac{2}{(x-10)^{2}+1} + #frac{1}{(x-14)^{2}+1}       (1)
   defined on the interval [4,16]. Events distributed according to the formula
   (1) are simulated to create the unweighted histogram. Uniformly distributed
   events are simulated for the weighted histogram with weights calculated by
   formula (1). Each histogram has the same number of bins: 20. Fig.1 shows
   the result of comparison of the unweighted histogram with 200 events
   (minimal expected frequency equal to one) and the weighted histogram with
   500 events (minimal expected frequency equal to 25)

output of MACRO_TH1_Chi2Test_1_49_c1
   Fig 1. An example of comparison of the unweighted histogram with 200 events
   and the weighted histogram with 500 events:
      a) unweighted histogram;
      b) weighted histogram;
      c) normalized residuals plot;
      d) normal Q-Q plot of residuals.

   The value of the test statistic #chi^{2} is equal to
   21.09 with p-value equal to 0.33, therefore the hypothesis of identity of
   the two histograms can be accepted for 0.05 significant level. The behavior
   of the normalized residuals plot (see Fig. 1c) and the normal Q-Q plot
   (see Fig. 1d) of residuals are regular and we cannot identify the outliers
   or bins with a big influence on #chi^{2}.

   The second example presents the same two histograms but 17 events was added
   to content of bin number 15 in unweighted histogram. Fig.2 shows the result
   of comparison of the unweighted histogram with 217 events (minimal expected
   frequency equal to one) and the weighted histogram with 500 events (minimal
   expected frequency equal to 25)

output of MACRO_TH1_Chi2Test_1_52_c1
   Fig 2. An example of comparison of the unweighted histogram with 217 events
   and the weighted histogram with 500 events:
      a) unweighted histogram;
      b) weighted histogram;
      c) normalized residuals plot;
      d) normal Q-Q plot of residuals.

   The value of the test statistic #chi^{2} is equal to
   32.33 with p-value equal to 0.029, therefore the hypothesis of identity of
   the two histograms is rejected for 0.05 significant level. The behavior of
   the normalized residuals plot (see Fig. 2c) and the normal Q-Q plot (see
   Fig. 2d) of residuals are not regular and we can identify the outlier or
   bin with a big influence on #chi^{2}.

 References:

 [1] Pearson, K., 1904. On the Theory of Contingency and Its Relation to
     Association and Normal Correlation. Drapers' Co. Memoirs, Biometric
     Series No. 1, London.
 [2] Gagunashvili, N., 2006. #chi^{2} test for comparison
     of weighted and unweighted histograms. Statistical Problems in Particle
     Physics, Astrophysics and Cosmology, Proceedings of PHYSTAT05,
     Oxford, UK, 12-15 September 2005, Imperial College Press, London, 43-44.
     Gagunashvili,N., Comparison of weighted and unweighted histograms,
     arXiv:physics/0605123, 2006.
 [3] Cramer, H., 1946. Mathematical methods of statistics.
     Princeton University Press, Princeton.
 [4] Haberman, S.J., 1973. The analysis of residuals in cross-classified tables.
     Biometrics 29, 205-220.
 [5] Lewontin, R.C. and Felsenstein, J., 1965. The robustness of homogeneity
     test in 2xN tables. Biometrics 21, 19-33.
 [6] Seber, G.A.F., Lee, A.J., 2003, Linear Regression Analysis.
     John Wiley & Sons Inc., New York.
Double_t Chi2TestX(const TH1* h2, Double_t& chi2, Int_t& ndf, Int_t& igood, Option_t* option = "UU", Double_t* res = 0) const
 The computation routine of the Chisquare test. For the method description,
 see Chi2Test() function.
 Returns p-value
 parameters:
  - h2-second histogram
  - option:
     "UU" = experiment experiment comparison (unweighted-unweighted)
     "UW" = experiment MC comparison (unweighted-weighted). Note that the first
           histogram should be unweighted
     "WW" = MC MC comparison (weighted-weighted)

     "NORM" = if one or both histograms is scaled

     "OF" = overflows included
     "UF" = underflows included
         by default underflows and overflows are not included

  - igood:
       igood=0 - no problems
        For unweighted unweighted  comparison
       igood=1'There is a bin in the 1st histogram with less than 1 event'
       igood=2'There is a bin in the 2nd histogram with less than 1 event'
       igood=3'when the conditions for igood=1 and igood=2 are satisfied'
        For  unweighted weighted  comparison
       igood=1'There is a bin in the 1st histogram with less then 1 event'
       igood=2'There is a bin in the 2nd histogram with less then 10 effective number of events'
       igood=3'when the conditions for igood=1 and igood=2 are satisfied'
        For  weighted weighted  comparison
       igood=1'There is a bin in the 1st  histogram with less then 10 effective
        number of events'
       igood=2'There is a bin in the 2nd  histogram with less then 10 effective
               number of events'
       igood=3'when the conditions for igood=1 and igood=2 are satisfied'

  - chi2 - chisquare of the test
  - ndf  - number of degrees of freedom (important, when both histograms have the same
         empty bins)
  - res -  normalized residuals for further analysis
Double_t Chisquare(TF1* f1, Option_t* option = "") const
 Compute and return the chisquare of this histogram with respect to a function
 The chisquare is computed by weighting each histogram point by the bin error
 By default the full range of the histogram is used.
 Use option "R" for restricting the chisquare calculation to the given range of the function
Double_t ComputeIntegral(Bool_t onlyPositive = false)
  Compute integral (cumulative sum of bins)
  The result stored in fIntegral is used by the GetRandom functions.
  This function is automatically called by GetRandom when the fIntegral
  array does not exist or when the number of entries in the histogram
  has changed since the previous call to GetRandom.
  The resulting integral is normalized to 1
  If the routine is called with the onlyPositive flag set an error will
  be produced in case of negative bin content and a NaN value returned
Double_t * GetIntegral()
  Return a pointer to the array of bins integral.
  if the pointer fIntegral is null, TH1::ComputeIntegral is called
 The array dimension is the number of bins in the histograms
 including underflow and overflow (fNCells)
 the last value integral[fNCells] is set to the number of entries of
 the histogram
TH1 * GetCumulative(Bool_t forward = kTRUE, const char* suffix = "_cumulative") const
  Return a pointer to an histogram containing the cumulative The
  cumulative can be computed both in the forward (default) or backward
  direction; the name of the new histogram is constructed from
  the name of this histogram with the suffix suffix appended.

 The cumulative distribution is formed by filling each bin of the
 resulting histogram with the sum of that bin and all previous
 (forward == kTRUE) or following (forward = kFALSE) bins.

 note: while cumulative distributions make sense in one dimension, you
 may not be getting what you expect in more than 1D because the concept
 of a cumulative distribution is much trickier to define; make sure you
 understand the order of summation before you use this method with
 histograms of dimension >= 2.
void Copy(TObject& hnew) const
   -*-*-*-*-*Copy this histogram structure to newth1*-*-*-*-*-*-*-*-*-*-*-*


 Note that this function does not copy the list of associated functions.
 Use TObject::Clone to make a full copy of an histogram.
void DirectoryAutoAdd(TDirectory* )
 Perform the automatic addition of the histogram to the given directory

 Note this function is called in place when the semantic requires
 this object to be added to a directory (I.e. when being read from
 a TKey or being Cloned)

Int_t DistancetoPrimitive(Int_t px, Int_t py)
   -*-*-*-*-*-*-*-*-*Compute distance from point px,py to a line*-*-*-*-*-*

     Compute the closest distance of approach from point px,py to elements
     of an histogram.
     The distance is computed in pixels units.

     Algorithm:
     Currently, this simple model computes the distance from the mouse
     to the histogram contour only.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Bool_t Divide(TF1* f1, Double_t c1 = 1)
 Performs the operation: this = this/(c1*f1)
 if errors are defined (see TH1::Sumw2), errors are also recalculated.

 Only bins inside the function range are recomputed.
 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Divide

 The function return kFALSE if the divide operation failed
Bool_t Divide(const TH1* h1)
   -*-*-*-*-*-*-*-*-*Divide this histogram by h1*-*-*-*-*-*-*-*-*-*-*-*-*


   this = this/h1
   if errors are defined (see TH1::Sumw2), errors are also recalculated.
   Note that if h1 has Sumw2 set, Sumw2 is automatically called for this
   if not already set.
   The resulting errors are calculated assuming uncorrelated histograms.
   See the other TH1::Divide that gives the possibility to optionally
   compute binomial errors.

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Scale

 The function return kFALSE if the divide operation failed
Bool_t Divide(const TH1* h1, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1, Option_t* option = "")
   -*-*-*Replace contents of this histogram by the division of h1 by h2*-*-*


   this = c1*h1/(c2*h2)

   if errors are defined (see TH1::Sumw2), errors are also recalculated
   Note that if h1 or h2 have Sumw2 set, Sumw2 is automatically called for this
   if not already set.
   The resulting errors are calculated assuming uncorrelated histograms.
   However, if option ="B" is specified, Binomial errors are computed.
   In this case c1 and c2 do not make real sense and they are ignored.

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Divide

  Please note also that in the binomial case errors are calculated using standard
  binomial statistics, which means when b1 = b2, the error is zero.
  If you prefer to have efficiency errors not going to zero when the efficiency is 1, you must
  use the function TGraphAsymmErrors::BayesDivide, which will return an asymmetric and non-zero lower
  error for the case b1=b2.

 The function return kFALSE if the divide operation failed
void Draw(Option_t* option = "")
 Draw this histogram with options.

 Histograms are drawn via the THistPainter class. Each histogram has
 a pointer to its own painter (to be usable in a multithreaded program).
 The same histogram can be drawn with different options in different pads.
 When an histogram drawn in a pad is deleted, the histogram is
 automatically removed from the pad or pads where it was drawn.
 If an histogram is drawn in a pad, then filled again, the new status
 of the histogram will be automatically shown in the pad next time
 the pad is updated. One does not need to redraw the histogram.
 To draw the current version of an histogram in a pad, one can use
      h->DrawCopy();
 This makes a clone of the histogram. Once the clone is drawn, the original
 histogram may be modified or deleted without affecting the aspect of the
 clone.
 By default, TH1::Draw clears the current pad.

 One can use TH1::SetMaximum and TH1::SetMinimum to force a particular
 value for the maximum or the minimum scale on the plot.

 TH1::UseCurrentStyle can be used to change all histogram graphics
 attributes to correspond to the current selected style.
 This function must be called for each histogram.
 In case one reads and draws many histograms from a file, one can force
 the histograms to inherit automatically the current graphics style
 by calling before gROOT->ForceStyle();

 See the THistPainter class for a description of all the drawing options.
TH1 * DrawCopy(Option_t* option = "") const
   -*-*-*-*-*Copy this histogram and Draw in the current pad*-*-*-*-*-*-*-*


     Once the histogram is drawn into the pad, any further modification
     using graphics input will be made on the copy of the histogram,
     and not to the original object.

     See Draw for the list of options

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
TH1 * DrawNormalized(Option_t* option = "", Double_t norm = 1) const
  Draw a normalized copy of this histogram.

  A clone of this histogram is normalized to norm and drawn with option.
  A pointer to the normalized histogram is returned.
  The contents of the histogram copy are scaled such that the new
  sum of weights (excluding under and overflow) is equal to norm.
  Note that the returned normalized histogram is not added to the list
  of histograms in the current directory in memory.
  It is the user's responsability to delete this histogram.
  The kCanDelete bit is set for the returned object. If a pad containing
  this copy is cleared, the histogram will be automatically deleted

     See Draw for the list of options

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
void DrawPanel()
   -*-*-*-*-*Display a panel with all histogram drawing options*-*-*-*-*-*


      See class TDrawPanelHist for example
void Eval(TF1* f1, Option_t* option = "")
   -*-*-*Evaluate function f1 at the center of bins of this histogram-*-*-*-*


     If option "R" is specified, the function is evaluated only
     for the bins included in the function range.
     If option "A" is specified, the value of the function is added to the
     existing bin contents
     If option "S" is specified, the value of the function is used to
     generate a value, distributed according to the Poisson
     distribution, with f1 as the mean.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
void ExecuteEvent(Int_t event, Int_t px, Int_t py)
   -*-*-*-*-*-*-*-*-*Execute action corresponding to one event*-*-*-*

     This member function is called when a histogram is clicked with the locator

     If Left button clicked on the bin top value, then the content of this bin
     is modified according to the new position of the mouse when it is released.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
TH1* FFT(TH1* h_output, Option_t* option)
 This function allows to do discrete Fourier transforms of TH1 and TH2.
 Available transform types and flags are described below.

 To extract more information about the transform, use the function
  TVirtualFFT::GetCurrentTransform() to get a pointer to the current
  transform object.

 Parameters:
  1st - histogram for the output. If a null pointer is passed, a new histogram is created
  and returned, otherwise, the provided histogram is used and should be big enough

  Options: option parameters consists of 3 parts:
    - option on what to return
   "RE" - returns a histogram of the real part of the output
   "IM" - returns a histogram of the imaginary part of the output
   "MAG"- returns a histogram of the magnitude of the output
   "PH" - returns a histogram of the phase of the output

    - option of transform type
   "R2C"  - real to complex transforms - default
   "R2HC" - real to halfcomplex (special format of storing output data,
          results the same as for R2C)
   "DHT" - discrete Hartley transform
         real to real transforms (sine and cosine):
   "R2R_0", "R2R_1", "R2R_2", "R2R_3" - discrete cosine transforms of types I-IV
   "R2R_4", "R2R_5", "R2R_6", "R2R_7" - discrete sine transforms of types I-IV
    To specify the type of each dimension of a 2-dimensional real to real
    transform, use options of form "R2R_XX", for example, "R2R_02" for a transform,
    which is of type "R2R_0" in 1st dimension and  "R2R_2" in the 2nd.

    - option of transform flag
    "ES" (from "estimate") - no time in preparing the transform, but probably sub-optimal
       performance
    "M" (from "measure")   - some time spend in finding the optimal way to do the transform
    "P" (from "patient")   - more time spend in finding the optimal way to do the transform
    "EX" (from "exhaustive") - the most optimal way is found
     This option should be chosen depending on how many transforms of the same size and
     type are going to be done. Planning is only done once, for the first transform of this
     size and type. Default is "ES".
   Examples of valid options: "Mag R2C M" "Re R2R_11" "Im R2C ES" "PH R2HC EX"
Int_t Fill(Double_t x)
   -*-*-*-*-*-*-*-*Increment bin with abscissa X by 1*-*-*-*-*-*-*-*-*-*-*


    if x is less than the low-edge of the first bin, the Underflow bin is incremented
    if x is greater than the upper edge of last bin, the Overflow bin is incremented

    If the storage of the sum of squares of weights has been triggered,
    via the function Sumw2, then the sum of the squares of weights is incremented
    by 1 in the bin corresponding to x.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Int_t Fill(Double_t x, Double_t w)
   -*-*-*-*-*-*Increment bin with abscissa X with a weight w*-*-*-*-*-*-*-*


    if x is less than the low-edge of the first bin, the Underflow bin is incremented
    if x is greater than the upper edge of last bin, the Overflow bin is incremented

    If the storage of the sum of squares of weights has been triggered,
    via the function Sumw2, then the sum of the squares of weights is incremented
    by w^2 in the bin corresponding to x.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Int_t Fill(const char* name, Double_t w)
 Increment bin with namex with a weight w

 if x is less than the low-edge of the first bin, the Underflow bin is incremented
 if x is greater than the upper edge of last bin, the Overflow bin is incremented

 If the storage of the sum of squares of weights has been triggered,
 via the function Sumw2, then the sum of the squares of weights is incremented
 by w^2 in the bin corresponding to x.

void FillN(Int_t ntimes, const Double_t* x, const Double_t* w, Int_t stride = 1)
 Fill this histogram with an array x and weights w.

    ntimes:  number of entries in arrays x and w (array size must be ntimes*stride)
    x:       array of values to be histogrammed
    w:       array of weighs
    stride:  step size through arrays x and w

    If the weight is not equal to 1, the storage of the sum of squares of
    weights is automatically triggered and the sum of the squares of weights is incremented
    by w^2 in the bin corresponding to x.
    if w is NULL each entry is assumed a weight=1
void DoFillN(Int_t ntimes, const Double_t* x, const Double_t* w, Int_t stride = 1)
 internal method to fill histogram content from a vector
 called directly by TH1::BufferEmpty
void FillRandom(const char* fname, Int_t ntimes = 5000)
   -*-*-*-*-*Fill histogram following distribution in function fname*-*-*-*


      The distribution contained in the function fname (TF1) is integrated
      over the channel contents for the bin range of this histogram.
      It is normalized to 1.
      Getting one random number implies:
        - Generating a random number between 0 and 1 (say r1)
        - Look in which bin in the normalized integral r1 corresponds to
        - Fill histogram channel
      ntimes random numbers are generated

     One can also call TF1::GetRandom to get a random variate from a function.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-**-*-*-*-*-*-*-*
void FillRandom(TH1* h, Int_t ntimes = 5000)
   -*-*-*-*-*Fill histogram following distribution in histogram h*-*-*-*


      The distribution contained in the histogram h (TH1) is integrated
      over the channel contents for the bin range of this histogram.
      It is normalized to 1.
      Getting one random number implies:
        - Generating a random number between 0 and 1 (say r1)
        - Look in which bin in the normalized integral r1 corresponds to
        - Fill histogram channel
      ntimes random numbers are generated

    SPECIAL CASE when the target histogram has the same binning as the source.
   in this case we simply use a poisson distribution where
   the mean value per bin = bincontent/integral.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-**-*-*-*-*-*-*-*
Int_t FindBin(Double_t x, Double_t y = 0, Double_t z = 0)
   Return Global bin number corresponding to x,y,z


      2-D and 3-D histograms are represented with a one dimensional
      structure. This function tries to rebin the axis if the given point
      belongs to an under-/overflow bin.
      This has the advantage that all existing functions, such as
        GetBinContent, GetBinError, GetBinFunction work for all dimensions.
     See also TH1::GetBin, TAxis::FindBin and TAxis::FindFixBin
   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Int_t FindFixBin(Double_t x, Double_t y = 0, Double_t z = 0) const
   Return Global bin number corresponding to x,y,z


      2-D and 3-D histograms are represented with a one dimensional
      structure. This function DOES not try to rebin the axis if the given
      point belongs to an under-/overflow bin.
      This has the advantage that all existing functions, such as
        GetBinContent, GetBinError, GetBinFunction work for all dimensions.
     See also TH1::GetBin, TAxis::FindBin and TAxis::FindFixBin
   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Int_t FindFirstBinAbove(Double_t threshold = 0, Int_t axis = 1) const
find first bin with content > threshold for axis (1=x, 2=y, 3=z)
if no bins with content > threshold is found the function returns -1.
Int_t FindLastBinAbove(Double_t threshold = 0, Int_t axis = 1) const
find last bin with content > threshold for axis (1=x, 2=y, 3=z)
if no bins with content > threshold is found the function returns -1.
TObject * FindObject(const char* name) const
 search object named name in the list of functions
TObject * FindObject(const TObject* obj) const
 search object obj in the list of functions
TFitResultPtr Fit(const char* formula, Option_t* option = "", Option_t* goption = "", Double_t xmin = 0, Double_t xmax = 0)
                     Fit histogram with function fname

      fname is the name of an already predefined function created by TF1 or TF2
      Predefined functions such as gaus, expo and poln are automatically
      created by ROOT.
      fname can also be a formula, accepted by the linear fitter (linear parts divided
      by "++" sign), for example "x++sin(x)" for fitting "[0]*x+[1]*sin(x)"

  This function finds a pointer to the TF1 object with name fname
  and calls TH1::Fit(TF1 *f1,...)
TFitResultPtr Fit(TF1* f1, Option_t* option = "", Option_t* goption = "", Double_t xmin = 0, Double_t xmax = 0)
                     Fit histogram with function f1


      Fit this histogram with function f1.

      The list of fit options is given in parameter option.
         option = "W"  Set all weights to 1 for non empty bins; ignore error bars
                = "WW" Set all weights to 1 including empty bins; ignore error bars
                = "I"  Use integral of function in bin, normalized by the bin volume,
                       instead of value at bin center
                = "L"  Use Loglikelihood method (default is chisquare method)
                = "WL" Use Loglikelihood method and bin contents are not integer,
                       i.e. histogram is weighted (must have Sumw2() set)
                = "U"  Use a User specified fitting algorithm (via SetFCN)
                = "Q"  Quiet mode (minimum printing)
                = "V"  Verbose mode (default is between Q and V)
                = "E"  Perform better Errors estimation using Minos technique
                = "B"  User defined parameter settings are used for predefined functions
                       like "gaus", "expo", "poln", "landau".
                       Use this option when you want to fix one or more parameters for these functions.
                = "M"  More. Improve fit results.
                       It uses the IMPROVE command of TMinuit (see TMinuit::mnimpr).
                       This algorithm attempts to improve the found local minimum by searching for a
                       better one.
                = "R"  Use the Range specified in the function range
                = "N"  Do not store the graphics function, do not draw
                = "0"  Do not plot the result of the fit. By default the fitted function
                       is drawn unless the option"N" above is specified.
                = "+"  Add this new fitted function to the list of fitted functions
                       (by default, any previous function is deleted)
                = "C"  In case of linear fitting, don't calculate the chisquare
                       (saves time)
                = "F"  If fitting a polN, switch to minuit fitter
                = "S"  The result of the fit is returned in the TFitResultPtr
                       (see below Access to the Fit Result)

      When the fit is drawn (by default), the parameter goption may be used
      to specify a list of graphics options. See TH1::Draw for a complete
      list of these options.

      In order to use the Range option, one must first create a function
      with the expression to be fitted. For example, if your histogram
      has a defined range between -4 and 4 and you want to fit a gaussian
      only in the interval 1 to 3, you can do:
           TF1 *f1 = new TF1("f1", "gaus", 1, 3);
           histo->Fit("f1", "R");

      Setting initial conditions

      Parameters must be initialized before invoking the Fit function.
      The setting of the parameter initial values is automatic for the
      predefined functions : poln, expo, gaus, landau. One can however disable
      this automatic computation by specifying the option "B".
      Note that if a predefined function is defined with an argument,
      eg, gaus(0), expo(1), you must specify the initial values for
      the parameters.
      You can specify boundary limits for some or all parameters via
           f1->SetParLimits(p_number, parmin, parmax);
      if parmin>=parmax, the parameter is fixed
      Note that you are not forced to fix the limits for all parameters.
      For example, if you fit a function with 6 parameters, you can do:
        func->SetParameters(0, 3.1, 1.e-6, -8, 0, 100);
        func->SetParLimits(3, -10, -4);
        func->FixParameter(4, 0);
        func->SetParLimits(5, 1, 1);
      With this setup, parameters 0->2 can vary freely
      Parameter 3 has boundaries [-10,-4] with initial value -8
      Parameter 4 is fixed to 0
      Parameter 5 is fixed to 100.
      When the lower limit and upper limit are equal, the parameter is fixed.
      However to fix a parameter to 0, one must call the FixParameter function.

      Note that option "I" gives better results but is slower.


      Changing the fitting objective function

     By default a chi square function is used for fitting. When option "L" (or "LL") is used
     a Poisson likelihood function (see note below) is used.
     The functions are defined in the header Fit/Chi2Func.h or Fit/PoissonLikelihoodFCN and they
     are implemented using the routines FitUtil::EvaluateChi2 or FitUtil::EvaluatePoissonLogL in
     the file math/mathcore/src/FitUtil.cxx.
     To specify a User defined fitting function, specify option "U" and
     call the following functions:
       TVirtualFitter::Fitter(myhist)->SetFCN(MyFittingFunction)
     where MyFittingFunction is of type:
     extern void MyFittingFunction(Int_t &npar, Double_t *gin, Double_t &f, Double_t *u, Int_t flag);

     Likelihood Fits

     When using option "L" a likelihood fit is used instead of the default chi2 square fit.
     The likelihood is built assuming a Poisson probability density function for each bin.
     This method can then be used only when the bin content represents counts (i.e. errors are sqrt(N) ).
     The likelihood method has the advantage of treating correctly the empty bins and use them in the
     fit procedure.
     In the chi2 method the empty bins are skipped and not considered in the fit.
     The likelihood method, although a bit slower, it is the recommended method in case of low
     bin statistics, where the chi2 method may give incorrect results.

      Fitting a histogram of dimension N with a function of dimension N-1

     It is possible to fit a TH2 with a TF1 or a TH3 with a TF2.
     In this case the option "Integral" is not allowed and each cell has
     equal weight.

     Associated functions

     One or more object (typically a TF1*) can be added to the list
     of functions (fFunctions) associated to each histogram.
     When TH1::Fit is invoked, the fitted function is added to this list.
     Given an histogram h, one can retrieve an associated function
     with:  TF1 *myfunc = h->GetFunction("myfunc");

      Access to the fit result

     The function returns a TFitResultPtr which can hold a  pointer to a TFitResult object.
     By default the TFitResultPtr contains only the status of the fit which is return by an
     automatic conversion of the TFitResultPtr to an integer. One can write in this case directly:
     Int_t fitStatus =  h->Fit(myFunc)

     If the option "S" is instead used, TFitResultPtr contains the TFitResult and behaves as a smart
     pointer to it. For example one can do:
     TFitResultPtr r = h->Fit(myFunc,"S");
     TMatrixDSym cov = r->GetCovarianceMatrix();  //  to access the covariance matrix
     Double_t chi2   = r->Chi2(); // to retrieve the fit chi2
     Double_t par0   = r->Parameter(0); // retrieve the value for the parameter 0
     Double_t err0   = r->ParError(0); // retrieve the error for the parameter 0
     r->Print("V");     // print full information of fit including covariance matrix
     r->Write();        // store the result in a file

     The fit parameters, error and chi2 (but not covariance matrix) can be retrieved also
     from the fitted function.
     If the histogram is made persistent, the list of
     associated functions is also persistent. Given a pointer (see above)
     to an associated function myfunc, one can retrieve the function/fit
     parameters with calls such as:
       Double_t chi2 = myfunc->GetChisquare();
       Double_t par0 = myfunc->GetParameter(0); //value of 1st parameter
       Double_t err0 = myfunc->GetParError(0);  //error on first parameter


     Access to the fit status

     The status of the fit can be obtained converting the TFitResultPtr to an integer
     independently if the fit option "S" is used or not:
     TFitResultPtr r = h->Fit(myFunc,opt);
     Int_t fitStatus = r;

     The fitStatus is 0 if the fit is OK (i.e no error occurred).
     The value of the fit status code is negative in case of an error not connected with the
     minimization procedure, for example  when a wrong function is used.
     Otherwise the return value is the one returned from the minimization procedure.
     When TMinuit (default case) or Minuit2 are used as minimizer the status returned is :
     fitStatus =  migradResult + 10*minosResult + 100*hesseResult + 1000*improveResult.
     TMinuit will return 0 (for migrad, minos, hesse or improve) in case of success and 4 in
     case of error (see the documentation of TMinuit::mnexcm). So for example, for an error
     only in Minos but not in Migrad a fitStatus of 40 will be returned.
     Minuit2 will return also 0 in case of success and different values in migrad minos or
     hesse depending on the error. See in this case the documentation of
     Minuit2Minimizer::Minimize for the migradResult, Minuit2Minimizer::GetMinosError for the
     minosResult and Minuit2Minimizer::Hesse for the hesseResult.
     If other minimizers are used see their specific documentation for the status code returned.
     For example in the case of Fumili, for the status returned see TFumili::Minimize.

      Excluding points

     Use TF1::RejectPoint inside your fitting function to exclude points
     within a certain range from the fit. Example:
     Double_t fline(Double_t *x, Double_t *par)
     {
         if (x[0] > 2.5 && x[0] < 3.5) {
           TF1::RejectPoint();
           return 0;
        }
        return par[0] + par[1]*x[0];
     }

     void exclude() {
        TF1 *f1 = new TF1("f1", "[0] +[1]*x +gaus(2)", 0, 5);
        f1->SetParameters(6, -1,5, 3, 0.2);
        TH1F *h = new TH1F("h", "background + signal", 100, 0, 5);
        h->FillRandom("f1", 2000);
        TF1 *fline = new TF1("fline", fline, 0, 5, 2);
        fline->SetParameters(2, -1);
        h->Fit("fline", "l");
     }

      Warning when using the option "0"

     When selecting the option "0", the fitted function is added to
     the list of functions of the histogram, but it is not drawn.
     You can undo what you disabled in the following way:
       h.Fit("myFunction", "0"); // fit, store function but do not draw
       h.Draw(); function is not drawn
       const Int_t kNotDraw = 1<<9;
       h.GetFunction("myFunction")->ResetBit(kNotDraw);
       h.Draw();  // function is visible again

      Access to the Minimizer information during fitting

     This function calls, the ROOT::Fit::FitObject function implemented in HFitImpl.cxx
     which uses the ROOT::Fit::Fitter class. The Fitter class creates the objective fuction
     (e.g. chi2 or likelihood) and uses an implementation of the  Minimizer interface for minimizing
     the function.
     The default minimizer is Minuit (class TMinuitMinimizer which calls TMinuit).
     The default  can be set in the resource file in etc/system.rootrc. For example
     Root.Fitter:      Minuit2
     A different fitter can also be set via ROOT::Math::MinimizerOptions::SetDefaultMinimizer
     (or TVirtualFitter::SetDefaultFitter).
     For example ROOT::Math::MinimizerOptions::SetDefaultMinimizer("GSLMultiMin","BFGS");
     will set the usdage of the BFGS algorithm of the GSL multi-dimensional minimization
     (implemented in libMathMore). ROOT::Math::MinimizerOptions can be used also to set other
     default options, like maximum number of function calls, minimization tolerance or print
     level. See the documentation of this class.

     For fitting linear functions (containing the "++" sign" and polN functions,
     the linear fitter is automatically initialized.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
void FitPanel()
   -*-*-*-*-*Display a panel with all histogram fit options*-*-*-*-*-*


      See class TFitPanel for example
TH1 * GetAsymmetry(TH1* h2, Double_t c2 = 1, Double_t dc2 = 0)
  return an histogram containing the asymmetry of this histogram with h2,
  where the asymmetry is defined as:

  Asymmetry = (h1 - h2)/(h1 + h2)  where h1 = this

  works for 1D, 2D, etc. histograms
  c2 is an optional argument that gives a relative weight between the two
  histograms, and dc2 is the error on this weight.  This is useful, for example,
  when forming an asymmetry between two histograms from 2 different data sets that
  need to be normalized to each other in some way.  The function calculates
  the errors asumming Poisson statistics on h1 and h2 (that is, dh = sqrt(h)).

  example:  assuming 'h1' and 'h2' are already filled

     h3 = h1->GetAsymmetry(h2)

  then 'h3' is created and filled with the asymmetry between 'h1' and 'h2';
  h1 and h2 are left intact.

  Note that it is the user's responsibility to manage the created histogram.

  code proposed by Jason Seely (seely@mit.edu) and adapted by R.Brun

 clone the histograms so top and bottom will have the
 correct dimensions:
 Sumw2 just makes sure the errors will be computed properly
 when we form sums and ratios below.
Int_t GetDefaultBufferSize()
 static function
 return the default buffer size for automatic histograms
 the parameter fgBufferSize may be changed via SetDefaultBufferSize
Bool_t GetDefaultSumw2()
 static function
 return kTRUE if TH1::Sumw2 must be called when creating new histograms.
 see TH1::SetDefaultSumw2.
Double_t GetEntries() const
 return the current number of entries
Double_t GetEffectiveEntries() const
 number of effective entries of the histogram,
 neff = (Sum of weights )^2 / (Sum of weight^2 )
 In case of an unweighted histogram this number is equivalent to the
 number of entries of the histogram.
 For a weighted histogram, this number corresponds to the hypotetical number of unweighted entries
 a histogram would need to have the same statistical power as this weighted histogram.
 Note: The underflow/overflow are included if one has set the TH1::StatOverFlows flag
 and if the statistics has been computed at filling time.
 If a range is set in the histogram the number is computed from the given range.
char * GetObjectInfo(Int_t px, Int_t py) const
   Redefines TObject::GetObjectInfo.
   Displays the histogram info (bin number, contents, integral up to bin
   corresponding to cursor position px,py

TVirtualHistPainter * GetPainter(Option_t* option = "")
 return pointer to painter
 if painter does not exist, it is created
Int_t GetQuantiles(Int_t nprobSum, Double_t* q, const Double_t* probSum = 0)
  Compute Quantiles for this histogram
     Quantile x_q of a probability distribution Function F is defined as

        F(x_q) = q with 0 <= q <= 1.

     For instance the median x_0.5 of a distribution is defined as that value
     of the random variable for which the distribution function equals 0.5:

        F(x_0.5) = Probability(x < x_0.5) = 0.5

  code from Eddy Offermann, Renaissance

 input parameters
   - this 1-d histogram (TH1F,D,etc). Could also be a TProfile
   - nprobSum maximum size of array q and size of array probSum (if given)
   - probSum array of positions where quantiles will be computed.
     if probSum is null, probSum will be computed internally and will
     have a size = number of bins + 1 in h. it will correspond to the
      quantiles calculated at the lowest edge of the histogram (quantile=0) and
     all the upper edges of the bins.
     if probSum is not null, it is assumed to contain at least nprobSum values.
  output
   - return value nq (<=nprobSum) with the number of quantiles computed
   - array q filled with nq quantiles

  Note that the Integral of the histogram is automatically recomputed
  if the number of entries is different of the number of entries when
  the integral was computed last time. In case you do not use the Fill
  functions to fill your histogram, but SetBinContent, you must call
  TH1::ComputeIntegral before calling this function.

  Getting quantiles q from two histograms and storing results in a TGraph,
   a so-called QQ-plot

     TGraph *gr = new TGraph(nprob);
     h1->GetQuantiles(nprob,gr->GetX());
     h2->GetQuantiles(nprob,gr->GetY());
     gr->Draw("alp");

 Example:
     void quantiles() {
        // demo for quantiles
        const Int_t nq = 20;
        TH1F *h = new TH1F("h","demo quantiles",100,-3,3);
        h->FillRandom("gaus",5000);

        Double_t xq[nq];  // position where to compute the quantiles in [0,1]
        Double_t yq[nq];  // array to contain the quantiles
        for (Int_t i=0;i<nq;i++) xq[i] = Float_t(i+1)/nq;
        h->GetQuantiles(nq,yq,xq);

        //show the original histogram in the top pad
        TCanvas *c1 = new TCanvas("c1","demo quantiles",10,10,700,900);
        c1->Divide(1,2);
        c1->cd(1);
        h->Draw();

        // show the quantiles in the bottom pad
        c1->cd(2);
        gPad->SetGrid();
        TGraph *gr = new TGraph(nq,xq,yq);
        gr->SetMarkerStyle(21);
        gr->Draw("alp");
     }
Int_t FitOptionsMake(Option_t* option, Foption_t& Foption)
   -*-*-*-*-*-*-*Decode string choptin and fill fitOption structure*-*-*-*-*-*

Int_t GetBin(Int_t binx, Int_t biny = 0, Int_t binz = 0) const
   -*-*-*-*Return Global bin number corresponding to binx,y,z*-*-*-*-*-*-*


      2-D and 3-D histograms are represented with a one dimensional
      structure.
      This has the advantage that all existing functions, such as
        GetBinContent, GetBinError, GetBinFunction work for all dimensions.

     In case of a TH1x, returns binx directly.
     see TH1::GetBinXYZ for the inverse transformation.

      Convention for numbering bins

      For all histogram types: nbins, xlow, xup
        bin = 0;       underflow bin
        bin = 1;       first bin with low-edge xlow INCLUDED
        bin = nbins;   last bin with upper-edge xup EXCLUDED
        bin = nbins+1; overflow bin
      In case of 2-D or 3-D histograms, a "global bin" number is defined.
      For example, assuming a 3-D histogram with binx,biny,binz, the function
        Int_t bin = h->GetBin(binx,biny,binz);
      returns a global/linearized bin number. This global bin is useful
      to access the bin information independently of the dimension.
   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
void GetBinXYZ(Int_t binglobal, Int_t& binx, Int_t& biny, Int_t& binz) const
 return binx, biny, binz corresponding to the global bin number globalbin
 see TH1::GetBin function above
Double_t GetRandom() const
 return a random number distributed according the histogram bin contents.
 This function checks if the bins integral exists. If not, the integral
 is evaluated, normalized to one.
 The integral is automatically recomputed if the number of entries
 is not the same then when the integral was computed.
 NB Only valid for 1-d histograms. Use GetRandom2 or 3 otherwise.
 If the histogram has a bin with negative content a NaN is returned
Double_t GetBinContent(Int_t bin) const
   -*-*-*-*-*Return content of bin number bin

 Implemented in TH1C,S,F,D

      Convention for numbering bins

      For all histogram types: nbins, xlow, xup
        bin = 0;       underflow bin
        bin = 1;       first bin with low-edge xlow INCLUDED
        bin = nbins;   last bin with upper-edge xup EXCLUDED
        bin = nbins+1; overflow bin
      In case of 2-D or 3-D histograms, a "global bin" number is defined.
      For example, assuming a 3-D histogram with binx,biny,binz, the function
        Int_t bin = h->GetBin(binx,biny,binz);
      returns a global/linearized bin number. This global bin is useful
      to access the bin information independently of the dimension.
Double_t GetBinContent(Int_t binx, Int_t biny) const
   -*-*-*-*-*Return content of bin number binx, biny

 NB: Function to be called for 2-D histograms only
 see convention for numbering bins in TH1::GetBin
Double_t GetBinContent(Int_t binx, Int_t biny, Int_t binz) const
   -*-*-*-*-*Return content of bin number binx,biny,binz

 NB: Function to be called for 3-D histograms only
 see convention for numbering bins in TH1::GetBin
Double_t GetBinWithContent(Double_t c, Int_t& binx, Int_t firstx = 0, Int_t lastx = 0, Double_t maxdiff = 0) const
 compute first binx in the range [firstx,lastx] for which
 diff = abs(bin_content-c) <= maxdiff
 In case several bins in the specified range with diff=0 are found
 the first bin found is returned in binx.
 In case several bins in the specified range satisfy diff <=maxdiff
 the bin with the smallest difference is returned in binx.
 In all cases the function returns the smallest difference.

 NOTE1: if firstx <= 0, firstx is set to bin 1
        if (lastx < firstx then firstx is set to the number of bins
        ie if firstx=0 and lastx=0 (default) the search is on all bins.
 NOTE2: if maxdiff=0 (default), the first bin with content=c is returned.
TAxis * GetXaxis() const
 return a pointer to the X axis object
TAxis * GetYaxis() const
 return a pointer to the Y axis object
TAxis * GetZaxis() const
 return a pointer to the Z axis object
Double_t Interpolate(Double_t x)
 Given a point x, approximates the value via linear interpolation
 based on the two nearest bin centers
 Andy Mastbaum 10/21/08
Double_t Interpolate(Double_t x, Double_t y)
Double_t Interpolate(Double_t x, Double_t y, Double_t z)
Bool_t IsBinOverflow(Int_t bin) const
Bool_t IsBinUnderflow(Int_t bin) const
void LabelsDeflate(Option_t* axis = "X")
 Reduce the number of bins for the axis passed in the option to the number of bins having a label.
 The method will remove only the extra bins existing after the last "labeled" bin.
 Note that if there are "un-labeled" bins present between "labeled" bins they will not be removed
void LabelsInflate(Option_t* axis = "X")
 Double the number of bins for axis.
 Refill histogram
 This function is called by TAxis::FindBin(const char *label)
void LabelsOption(Option_t* option = "h", Option_t* axis = "X")
  Set option(s) to draw axis with labels
  option = "a" sort by alphabetic order
         = ">" sort by decreasing values
         = "<" sort by increasing values
         = "h" draw labels horizontal
         = "v" draw labels vertical
         = "u" draw labels up (end of label right adjusted)
         = "d" draw labels down (start of label left adjusted)
Bool_t SameLimitsAndNBins(const TAxis& axis1, const TAxis& axis2)
 Same limits and bins.
Bool_t RecomputeAxisLimits(TAxis& destAxis, const TAxis& anAxis)
 Finds new limits for the axis for the Merge function.
 returns false if the limits are incompatible
Long64_t Merge(TCollection* list)
 Add all histograms in the collection to this histogram.
 This function computes the min/max for the x axis,
 compute a new number of bins, if necessary,
 add bin contents, errors and statistics.
 If all histograms have bin labels, bins with identical labels
 will be merged, no matter what their order is.
 If overflows are present and limits are different the function will fail.
 The function returns the total number of entries in the result histogram
 if the merge is successful, -1 otherwise.

 IMPORTANT remark. The axis x may have different number
 of bins and different limits, BUT the largest bin width must be
 a multiple of the smallest bin width and the upper limit must also
 be a multiple of the bin width.
 Example:
 void atest() {
    TH1F *h1 = new TH1F("h1","h1",110,-110,0);
    TH1F *h2 = new TH1F("h2","h2",220,0,110);
    TH1F *h3 = new TH1F("h3","h3",330,-55,55);
    TRandom r;
    for (Int_t i=0;i<10000;i++) {
       h1->Fill(r.Gaus(-55,10));
       h2->Fill(r.Gaus(55,10));
       h3->Fill(r.Gaus(0,10));
    }

    TList *list = new TList;
    list->Add(h1);
    list->Add(h2);
    list->Add(h3);
    TH1F *h = (TH1F*)h1->Clone("h");
    h->Reset();
    h->Merge(list);
    h->Draw();
 }
Bool_t Multiply(TF1* h1, Double_t c1 = 1)
 Performs the operation: this = this*c1*f1
 if errors are defined (see TH1::Sumw2), errors are also recalculated.

 Only bins inside the function range are recomputed.
 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Multiply

 The function return kFALSE if the Multiply operation failed
Bool_t Multiply(const TH1* h1)
   -*-*-*-*-*-*-*-*-*Multiply this histogram by h1*-*-*-*-*-*-*-*-*-*-*-*-*


   this = this*h1

   If errors of this are available (TH1::Sumw2), errors are recalculated.
   Note that if h1 has Sumw2 set, Sumw2 is automatically called for this
   if not already set.

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Multiply

 The function return kFALSE if the Multiply operation failed
Bool_t Multiply(const TH1* h1, const TH1* h2, Double_t c1 = 1, Double_t c2 = 1, Option_t* option = "")
   -*-*-*Replace contents of this histogram by multiplication of h1 by h2*-*


   this = (c1*h1)*(c2*h2)

   If errors of this are available (TH1::Sumw2), errors are recalculated.
   Note that if h1 or h2 have Sumw2 set, Sumw2 is automatically called for this
   if not already set.

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Multiply

 The function return kFALSE if the Multiply operation failed
void Paint(Option_t* option = "")
   -*-*-*-*-*-*-*Control routine to paint any kind of histograms*-*-*-*-*-*-*


  This function is automatically called by TCanvas::Update.
  (see TH1::Draw for the list of options)
TH1 * Rebin(Int_t ngroup = 2, const char* newname = "", const Double_t* xbins = 0)
   Rebin this histogram

  -case 1  xbins=0
   If newname is blank (default), the current histogram is modified and
   a pointer to it is returned.

   If newname is not blank, the current histogram is not modified, and a
   new histogram is returned which is a Clone of the current histogram
   with its name set to newname.

   The parameter ngroup indicates how many bins of this have to be merged
   into one bin of the result.

   If the original histogram has errors stored (via Sumw2), the resulting
   histograms has new errors correctly calculated.

   examples: if h1 is an existing TH1F histogram with 100 bins
     h1->Rebin();  //merges two bins in one in h1: previous contents of h1 are lost
     h1->Rebin(5); //merges five bins in one in h1
     TH1F *hnew = h1->Rebin(5,"hnew"); // creates a new histogram hnew
                                       // merging 5 bins of h1 in one bin

   NOTE:  If ngroup is not an exact divider of the number of bins,
          the top limit of the rebinned histogram is reduced
          to the upper edge of the last bin that can make a complete
          group. The remaining bins are added to the overflow bin.
          Statistics will be recomputed from the new bin contents.

  -case 2  xbins!=0
   A new histogram is created (you should specify newname).
   The parameter ngroup is the number of variable size bins in the created histogram.
   The array xbins must contain ngroup+1 elements that represent the low-edges
   of the bins.
   If the original histogram has errors stored (via Sumw2), the resulting
   histograms has new errors correctly calculated.

   NOTE:  The bin edges specified in xbins should correspond to bin edges
          in the original histogram. If a bin edge in the new histogram is
          in the middle of a bin in the original histogram, all entries in
          the split bin in the original histogram will be transfered to the
          lower of the two possible bins in the new histogram. This is
          probably not what you want.

   examples: if h1 is an existing TH1F histogram with 100 bins
     Double_t xbins[25] = {...} array of low-edges (xbins[25] is the upper edge of last bin
     h1->Rebin(24,"hnew",xbins);  //creates a new variable bin size histogram hnew
Bool_t FindNewAxisLimits(const TAxis* axis, const Double_t point, Double_t& newMin, Double_t& newMax)
 finds new limits for the axis so that *point* is within the range and
 the limits are compatible with the previous ones (see TH1::Merge).
 new limits are put into *newMin* and *newMax* variables.
 axis - axis whose limits are to be recomputed
 point - point that should fit within the new axis limits
 newMin - new minimum will be stored here
 newMax - new maximum will be stored here.
 false if failed (e.g. if the initial axis limits are wrong
 or the new range is more than 2^64 times the old one).
void RebinAxis(Double_t x, TAxis* axis)
 Histogram is resized along axis such that x is in the axis range.
 The new axis limits are recomputed by doubling iteratively
 the current axis range until the specified value x is within the limits.
 The algorithm makes a copy of the histogram, then loops on all bins
 of the old histogram to fill the rebinned histogram.
 Takes into account errors (Sumw2) if any.
 The algorithm works for 1-d, 2-D and 3-D histograms.
 The bit kCanRebin must be set before invoking this function.
  Ex:  h->SetBit(TH1::kCanRebin);
void RecursiveRemove(TObject* obj)
 Recursively remove object from the list of functions
void Scale(Double_t c1 = 1, Option_t* option = "")
   -*-*-*Multiply this histogram by a constant c1*-*-*-*-*-*-*-*-*


   this = c1*this

 Note that both contents and errors(if any) are scaled.
 This function uses the services of TH1::Add

 IMPORTANT NOTE: If you intend to use the errors of this histogram later
 you should call Sumw2 before making this operation.
 This is particularly important if you fit the histogram after TH1::Scale

 One can scale an histogram such that the bins integral is equal to
 the normalization parameter via TH1::Scale(Double_t norm), where norm
 is the desired normalization divided by the integral of the histogram.

 If option contains "width" the bin contents and errors are divided
 by the bin width.
void SetDefaultBufferSize(Int_t buffersize = 1000)
 static function to set the default buffer size for automatic histograms.
 When an histogram is created with one of its axis lower limit greater
 or equal to its upper limit, the function SetBuffer is automatically
 called with the default buffer size.
void SetDefaultSumw2(Bool_t sumw2 = kTRUE)
 static function.
 When this static function is called with sumw2=kTRUE, all new
 histograms will automatically activate the storage
 of the sum of squares of errors, ie TH1::Sumw2 is automatically called.
void SetTitle(const char* title)
 Change (i.e. set) the title

   if title is in the form "stringt;stringx;stringy;stringz"
   the histogram title is set to stringt, the x axis title to stringx,
   the y axis title to stringy, and the z axis title to stringz.
   To insert the character ";" in one of the titles, one should use "#;"
   or "#semicolon".
void SmoothArray(Int_t NN, Double_t* XX, Int_t ntimes = 1)
 smooth array xx, translation of Hbook routine hsmoof.F
 based on algorithm 353QH twice presented by J. Friedman
 in Proc.of the 1974 CERN School of Computing, Norway, 11-24 August, 1974.
void Smooth(Int_t ntimes = 1, Option_t* option = "")
 Smooth bin contents of this histogram.
 if option contains "R" smoothing is applied only to the bins
 defined in the X axis range (default is to smooth all bins)
 Bin contents are replaced by their smooth values.
 Errors (if any) are not modified.
 the smoothing procedure is repeated ntimes (default=1)
void StatOverflows(Bool_t flag = kTRUE)
  if flag=kTRUE, underflows and overflows are used by the Fill functions
  in the computation of statistics (mean value, RMS).
  By default, underflows or overflows are not used.
void Streamer(TBuffer& )
   -*-*-*-*-*-*-*Stream a class object*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

void Print(Option_t* option = "") const
   -*-*-*-*-*Print some global quantities for this histogram*-*-*-*-*-*-*-*


  If option "base" is given, number of bins and ranges are also printed
  If option "range" is given, bin contents and errors are also printed
                     for all bins in the current range (default 1-->nbins)
  If option "all" is given, bin contents and errors are also printed
                     for all bins including under and overflows.
void Rebuild(Option_t* option = "")
 Using the current bin info, recompute the arrays for contents and errors
void Reset(Option_t* option = "")
   -*-*-*-*-*-*Reset this histogram: contents, errors, etc*-*-*-*-*-*-*-*


 if option "ICE" is specified, resets only Integral, Contents and Errors.
 if option "ICES" is specified, resets only Integral, Contents , Errors and Statistics
                  This option is used
 if option "M"   is specified, resets also Minimum and Maximum
void SavePrimitive(ostream& out, Option_t* option = "")
 Save primitive as a C++ statement(s) on output stream out
void SavePrimitiveHelp(ostream& out, const char* hname, Option_t* option = "")
 helper function for the SavePrimitive functions from TH1
 or classes derived from TH1, eg TProfile, TProfile2D.
void UseCurrentStyle()
   Copy current attributes from/to current style
Double_t GetMean(Int_t axis = 1) const
  For axis = 1,2 or 3 returns the mean value of the histogram along
  X,Y or Z axis.
  For axis = 11, 12, 13 returns the standard error of the mean value
  of the histogram along X, Y or Z axis

  Note that the mean value/RMS is computed using the bins in the currently
  defined range (see TAxis::SetRange). By default the range includes
  all bins from 1 to nbins included, excluding underflows and overflows.
  To force the underflows and overflows in the computation, one must
  call the static function TH1::StatOverflows(kTRUE) before filling
  the histogram.
Double_t GetMeanError(Int_t axis = 1) const
   -*-*-*-*-*-*Return standard error of mean of this histogram along the X axis*-*-*-*-*

  Note that the mean value/RMS is computed using the bins in the currently
  defined range (see TAxis::SetRange). By default the range includes
  all bins from 1 to nbins included, excluding underflows and overflows.
  To force the underflows and overflows in the computation, one must
  call the static function TH1::StatOverflows(kTRUE) before filling
  the histogram.
  Also note, that although the definition of standard error doesn't include the
  assumption of normality, many uses of this feature implicitly assume it.
Double_t GetRMS(Int_t axis = 1) const
  For axis = 1,2 or 3 returns the Sigma value of the histogram along
  X, Y or Z axis
  For axis = 11, 12 or 13 returns the error of RMS estimation along
  X, Y or Z axis for Normal distribution

     Note that the mean value/sigma is computed using the bins in the currently
  defined range (see TAxis::SetRange). By default the range includes
  all bins from 1 to nbins included, excluding underflows and overflows.
  To force the underflows and overflows in the computation, one must
  call the static function TH1::StatOverflows(kTRUE) before filling
  the histogram.
  Note that this function returns the Standard Deviation (Sigma)
  of the distribution (not RMS).
  The Sigma estimate is computed as Sqrt((1/N)*(Sum(x_i-x_mean)^2))
  The name "RMS" was introduced many years ago (Hbook/PAW times).
  We kept the name for continuity.
Double_t GetRMSError(Int_t axis = 1) const
  Return error of RMS estimation for Normal distribution

  Note that the mean value/RMS is computed using the bins in the currently
  defined range (see TAxis::SetRange). By default the range includes
  all bins from 1 to nbins included, excluding underflows and overflows.
  To force the underflows and overflows in the computation, one must
  call the static function TH1::StatOverflows(kTRUE) before filling
  the histogram.
  Value returned is standard deviation of sample standard deviation.
  Note that it is an approximated value which is valid only in the case that the
  original data distribution is Normal. The correct one would require
  the 4-th momentum value, which cannot be accurately estimated from an histogram since
  the x-information for all entries is not kept.
Double_t GetSkewness(Int_t axis = 1) const
For axis = 1, 2 or 3 returns skewness of the histogram along x, y or z axis.
For axis = 11, 12 or 13 returns the approximate standard error of skewness
of the histogram along x, y or z axis
Note, that since third and fourth moment are not calculated
at the fill time, skewness and its standard error are computed bin by bin
Double_t GetKurtosis(Int_t axis = 1) const
For axis =1, 2 or 3 returns kurtosis of the histogram along x, y or z axis.
Kurtosis(gaussian(0, 1)) = 0.
For axis =11, 12 or 13 returns the approximate standard error of kurtosis
of the histogram along x, y or z axis
Note, that since third and fourth moment are not calculated
at the fill time, kurtosis and its standard error are computed bin by bin
void GetStats(Double_t* stats) const
 fill the array stats from the contents of this histogram
 The array stats must be correctly dimensioned in the calling program.
 stats[0] = sumw
 stats[1] = sumw2
 stats[2] = sumwx
 stats[3] = sumwx2

 If no axis-subrange is specified (via TAxis::SetRange), the array stats
 is simply a copy of the statistics quantities computed at filling time.
 If a sub-range is specified, the function recomputes these quantities
 from the bin contents in the current axis range.

  Note that the mean value/RMS is computed using the bins in the currently
  defined range (see TAxis::SetRange). By default the range includes
  all bins from 1 to nbins included, excluding underflows and overflows.
  To force the underflows and overflows in the computation, one must
  call the static function TH1::StatOverflows(kTRUE) before filling
  the histogram.
void PutStats(Double_t* stats)
 Replace current statistics with the values in array stats
void ResetStats()
 Reset the statistics including the number of entries
 and replace with values calculates from bin content
 The number of entries is set to the total bin content or (in case of weighted histogram)
 to number of effective entries
Double_t GetSumOfWeights() const
   -*-*-*-*-*-*Return the sum of weights excluding under/overflows*-*-*-*-*

Double_t Integral(Option_t* option = "") const
Return integral of bin contents. Only bins in the bins range are considered.
 By default the integral is computed as the sum of bin contents in the range.
 if option "width" is specified, the integral is the sum of
 the bin contents multiplied by the bin width in x.
Double_t Integral(Int_t binx1, Int_t binx2, Option_t* option = "") const
Return integral of bin contents in range [binx1,binx2]
 By default the integral is computed as the sum of bin contents in the range.
 if option "width" is specified, the integral is the sum of
 the bin contents multiplied by the bin width in x.
Double_t IntegralAndError(Int_t binx1, Int_t binx2, Double_t& err, Option_t* option = "") const
Return integral of bin contents in range [binx1,binx2] and its error
 By default the integral is computed as the sum of bin contents in the range.
 if option "width" is specified, the integral is the sum of
 the bin contents multiplied by the bin width in x.
 the error is computed using error propagation from the bin errors assumming that
 all the bins are uncorrelated
Double_t DoIntegral(Int_t ix1, Int_t ix2, Int_t iy1, Int_t iy2, Int_t iz1, Int_t iz2, Double_t& err, Option_t* opt, Bool_t doerr = kFALSE) const
 internal function compute integral and optionally the error  between the limits
 specified by the bin number values working for all histograms (1D, 2D and 3D)
Double_t AndersonDarlingTest(const TH1* h2, Option_t* option = "") const
  Statistical test of compatibility in shape between
  this histogram and h2, using the Anderson-Darling 2 sample test.
  The AD 2 sample test formula are derived from the paper
  F.W Scholz, M.A. Stephens "k-Sample Anderson-Darling Test".
  The test is implemented in root in the ROOT::Math::GoFTest class
  It is the same formula ( (6) in the paper), and also shown in this preprint
  http://arxiv.org/pdf/0804.0380v1.pdf
  Binned data are considered as un-binned data
   with identical observation happening in the bin center.

     option is a character string to specify options
         "D" Put out a line of "Debug" printout
         "T" Return the normalized A-D test statistic

  Note1: Underflow and overflow are not considered in the test
  Note2:  The test works only for un-weighted histogram (i.e. representing counts)
  Note3:  The histograms are not required to have the same X axis
  Note4:  The test works only for 1-dimensional histograms
Double_t AndersonDarlingTest(const TH1* h2, Double_t& advalue) const
 Same funciton as above but returning also the test statistic value
Double_t KolmogorovTest(const TH1* h2, Option_t* option = "") const
  Statistical test of compatibility in shape between
  this histogram and h2, using Kolmogorov test.
  Note that the KolmogorovTest (KS) test should in theory be used only for unbinned data
  and not for binned data as in the case of the histogram (see NOTE 3 below).
  So, before using this method blindly, read the NOTE 3.


     Default: Ignore under- and overflow bins in comparison

     option is a character string to specify options
         "U" include Underflows in test  (also for 2-dim)
         "O" include Overflows     (also valid for 2-dim)
         "N" include comparison of normalizations
         "D" Put out a line of "Debug" printout
         "M" Return the Maximum Kolmogorov distance instead of prob
         "X" Run the pseudo experiments post-processor with the following procedure:
             make pseudoexperiments based on random values from the parent
             distribution and compare the KS distance of the pseudoexperiment
             to the parent distribution. Bin the KS distances in a histogram,
             and then take the integral of all the KS values above the value
             obtained from the original data to Monte Carlo distribution.
             The number of pseudo-experiments nEXPT is currently fixed at 1000.
             The function returns the integral.
             (thanks to Ben Kilminster to submit this procedure). Note that
             this option "X" is much slower.

   The returned function value is the probability of test
       (much less than one means NOT compatible)

  Code adapted by Rene Brun from original HBOOK routine HDIFF

  NOTE1
  A good description of the Kolmogorov test can be seen at:
    http://www.itl.nist.gov/div898/handbook/eda/section3/eda35g.htm

  NOTE2
  see also alternative function TH1::Chi2Test
  The Kolmogorov test is assumed to give better results than Chi2Test
  in case of histograms with low statistics.

  NOTE3 (Jan Conrad, Fred James)
  "The returned value PROB is calculated such that it will be
  uniformly distributed between zero and one for compatible histograms,
  provided the data are not binned (or the number of bins is very large
  compared with the number of events). Users who have access to unbinned
  data and wish exact confidence levels should therefore not put their data
  into histograms, but should call directly TMath::KolmogorovTest. On
  the other hand, since TH1 is a convenient way of collecting data and
  saving space, this function has been provided. However, the values of
  PROB for binned data will be shifted slightly higher than expected,
  depending on the effects of the binning. For example, when comparing two
  uniform distributions of 500 events in 100 bins, the values of PROB,
  instead of being exactly uniformly distributed between zero and one, have
  a mean value of about 0.56. We can apply a useful
  rule: As long as the bin width is small compared with any significant
  physical effect (for example the experimental resolution) then the binning
  cannot have an important effect. Therefore, we believe that for all
  practical purposes, the probability value PROB is calculated correctly
  provided the user is aware that:
     1. The value of PROB should not be expected to have exactly the correct
  distribution for binned data.
     2. The user is responsible for seeing to it that the bin widths are
  small compared with any physical phenomena of interest.
     3. The effect of binning (if any) is always to make the value of PROB
  slightly too big. That is, setting an acceptance criterion of (PROB>0.05
  will assure that at most 5% of truly compatible histograms are rejected,
  and usually somewhat less."

  Note also that for GoF test of unbinned data ROOT provides also the class
  ROOT::Math::GoFTest. The class has also method for doing one sample tests
  (i.e. comparing the data with a given distribution).
void SetContent(const Double_t* content)
   -*-*-*-*-*-*Replace bin contents by the contents of array content*-*-*-*

Int_t GetContour(Double_t* levels = 0)
  Return contour values into array levels if pointer levels is non zero

  The function returns the number of contour levels.
  see GetContourLevel to return one contour only

Double_t GetContourLevel(Int_t level) const
 Return value of contour number level
 see GetContour to return the array of all contour levels
Double_t GetContourLevelPad(Int_t level) const
 Return the value of contour number "level" in Pad coordinates ie: if the Pad
 is in log scale along Z it returns le log of the contour level value.
 see GetContour to return the array of all contour levels
void SetBuffer(Int_t buffersize, Option_t* option = "")
 set the maximum number of entries to be kept in the buffer
void SetContour(Int_t nlevels, const Double_t* levels = 0)
  Set the number and values of contour levels.

  By default the number of contour levels is set to 20. The contours values
  in the array "levels" should be specified in increasing order.

  if argument levels = 0 or missing, equidistant contours are computed
void SetContourLevel(Int_t level, Double_t value)
 Set value for one contour level.
Double_t GetMaximum(Double_t maxval = FLT_MAX) const
  Return maximum value smaller than maxval of bins in the range,
  unless the value has been overridden by TH1::SetMaximum,
  in which case it returns that value. (This happens, for example,
  when the histogram is drawn and the y or z axis limits are changed

  To get the maximum value of bins in the histogram regardless of
  whether the value has been overridden, use
      h->GetBinContent(h->GetMaximumBin())
Int_t GetMaximumBin() const
   -*-*-*-*-*Return location of bin with maximum value in the range*-*

Int_t GetMaximumBin(Int_t& locmax, Int_t& locmay, Int_t& locmaz) const
   -*-*-*-*-*Return location of bin with maximum value in the range*-*

Double_t GetMinimum(Double_t minval = -FLT_MAX) const
  Return minimum value larger than minval of bins in the range,
  unless the value has been overridden by TH1::SetMinimum,
  in which case it returns that value. (This happens, for example,
  when the histogram is drawn and the y or z axis limits are changed

  To get the minimum value of bins in the histogram regardless of
  whether the value has been overridden, use
     h->GetBinContent(h->GetMinimumBin())
Int_t GetMinimumBin() const
   -*-*-*-*-*Return location of bin with minimum value in the range*-*

Int_t GetMinimumBin(Int_t& locmix, Int_t& locmiy, Int_t& locmiz) const
   -*-*-*-*-*Return location of bin with minimum value in the range*-*

void SetBins(Int_t nx, Double_t xmin, Double_t xmax)
   -*-*-*-*-*-*-*Redefine  x axis parameters*-*-*-*-*-*-*-*-*-*-*-*

 The X axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
void SetBins(Int_t nx, const Double_t* xBins)
   -*-*-*-*-*-*-*Redefine  x axis parameters with variable bin sizes *-*-*-*-*-*-*-*-*-*

 The X axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
 xBins is supposed to be of length nx+1
void SetBins(Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax)
   -*-*-*-*-*-*-*Redefine  x and y axis parameters*-*-*-*-*-*-*-*-*-*-*-*

 The X and Y axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
void SetBins(Int_t nx, const Double_t* xBins, Int_t ny, const Double_t* yBins)
   -*-*-*-*-*-*-*Redefine  x and y axis parameters with variable bin sizes *-*-*-*-*-*-*-*-*

 The X and Y axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
 xBins is supposed to be of length nx+1, yBins is supposed to be of length ny+1
void SetBins(Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax, Int_t nz, Double_t zmin, Double_t zmax)
   -*-*-*-*-*-*-*Redefine  x, y and z axis parameters*-*-*-*-*-*-*-*-*-*-*-*

 The X, Y and Z axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
void SetBins(Int_t nx, const Double_t* xBins, Int_t ny, const Double_t* yBins, Int_t nz, const Double_t* zBins)
   -*-*-*-*-*-*-*Redefine  x, y and z axis parameters with variable bin sizes *-*-*-*-*-*-*-*-*

 The X, Y and Z axis parameters are modified.
 The bins content array is resized
 if errors (Sumw2) the errors array is resized
 The previous bin contents are lost
 To change only the axis limits, see TAxis::SetRange
 xBins is supposed to be of length nx+1, yBins is supposed to be of length ny+1,
 zBins is supposed to be of length nz+1
void SetMaximum(Double_t maximum = -1111)
 Set the maximum value for the Y axis, in case of 1-D histograms,
 or the Z axis in case of 2-D histograms

 By default the maximum value used in drawing is the maximum value of the histogram plus
 a margin of 10 per cent. If this function has been called, the value of 'maximum' is
 used, with no extra margin.

 TH1::GetMaximum returns the maximum value of the bins in the histogram, unless the
 maximum has been set manually by this function or by altering the y/z axis limits.
 Use TH1::GetMaximumBin to find the bin with the maximum value of an histogram

void SetMinimum(Double_t minimum = -1111)
 Set the minimum value for the Y axis, in case of 1-D histograms,
 or the Z axis in case of 2-D histograms

 By default the minimum value used in drawing is the minimum value of the histogram plus
 a margin of 10 per cent. If this function has been called, the value of 'minimum' is
 used, with no extra margin.

 TH1::GetMinimum returns the minimum value of the bins in the histogram, unless the
 minimum has been set manually by this function or by altering the y/z axis limits.
 Use TH1::GetMinimumBin to find the bin with the minimum value of an histogram

void SetDirectory(TDirectory* dir)
 By default when an histogram is created, it is added to the list
 of histogram objects in the current directory in memory.
 Remove reference to this histogram from current directory and add
 reference to new directory dir. dir can be 0 in which case the
 histogram does not belong to any directory.
void SetError(const Double_t* error)
   -*-*-*-*-*-*-*Replace bin errors by values in array error*-*-*-*-*-*-*-*-*

void SetName(const char* name)
 Change the name of this histogram

void SetNameTitle(const char* name, const char* title)
 Change the name and title of this histogram

void SetStats(Bool_t stats = kTRUE)
   -*-*-*-*-*-*-*Set statistics option on/off

  By default, the statistics box is drawn.
  The paint options can be selected via gStyle->SetOptStats.
  This function sets/resets the kNoStats bin in the histogram object.
  It has priority over the Style option.
void Sumw2(Bool_t flag = kTRUE)
 Create structure to store sum of squares of weights*-*-*-*-*-*-*-*

     if histogram is already filled, the sum of squares of weights
     is filled with the existing bin contents

     The error per bin will be computed as sqrt(sum of squares of weight)
     for each bin.

  This function is automatically called when the histogram is created
  if the static function TH1::SetDefaultSumw2 has been called before.
  If flag = false the structure is deleted
TF1 * GetFunction(const char* name) const
   -*-*-*Return pointer to function with name*-*-*-*-*-*-*-*-*-*-*-*-*


 Functions such as TH1::Fit store the fitted function in the list of
 functions of this histogram.
Double_t GetBinError(Int_t bin) const
   -*-*-*-*-*Return value of error associated to bin number bin*-*-*-*-*


    if the sum of squares of weights has been defined (via Sumw2),
    this function returns the sqrt(sum of w2).
    otherwise it returns the sqrt(contents) for this bin.

   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Double_t GetBinErrorLow(Int_t bin) const
   -*-*-*-*-*Return lower error associated to bin number bin*-*-*-*-*


    The error will depend on the statistic option used will return
     the binContent - lower interval value


   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Double_t GetBinErrorUp(Int_t bin) const
   -*-*-*-*-*Return upper error associated to bin number bin*-*-*-*-*


    The error will depend on the statistic option used will return
     the binContent - upper interval value


   -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Double_t GetBinError(Int_t binx, Int_t biny) const
   -*-*-*-*-*Return error of bin number binx, biny

 NB: Function to be called for 2-D histograms only
Double_t GetBinError(Int_t binx, Int_t biny, Int_t binz) const
   -*-*-*-*-*Return error of bin number binx,biny,binz

 NB: Function to be called for 3-D histograms only
Double_t GetCellContent(Int_t binx, Int_t biny) const
   -*-*-*-*-*Return content of bin number binx, biny

 NB: Function to be called for 2-D histograms only
Double_t GetCellError(Int_t binx, Int_t biny) const
   -*-*-*-*-*Return error of bin number binx, biny

 NB: Function to be called for 2-D histograms only
Double_t GetBinCenter(Int_t bin) const
 return bin center for 1D historam
 Better to use h1.GetXaxis().GetBinCenter(bin)
Double_t GetBinLowEdge(Int_t bin) const
 return bin lower edge for 1D historam
 Better to use h1.GetXaxis().GetBinLowEdge(bin)
Double_t GetBinWidth(Int_t bin) const
 return bin width for 1D historam
 Better to use h1.GetXaxis().GetBinWidth(bin)
void GetCenter(Double_t* center) const
 Fill array with center of bins for 1D histogram
 Better to use h1.GetXaxis().GetCenter(center)
void GetLowEdge(Double_t* edge) const
 Fill array with low edge of bins for 1D histogram
 Better to use h1.GetXaxis().GetLowEdge(edge)
void SetBinError(Int_t bin, Double_t error)
 see convention for numbering bins in TH1::GetBin
void SetBinContent(Int_t binx, Int_t biny, Double_t content)
 see convention for numbering bins in TH1::GetBin
void SetBinContent(Int_t binx, Int_t biny, Int_t binz, Double_t content)
 see convention for numbering bins in TH1::GetBin
void SetCellContent(Int_t binx, Int_t biny, Double_t content)
 Set cell content.
void SetBinError(Int_t binx, Int_t biny, Double_t error)
 see convention for numbering bins in TH1::GetBin
void SetBinError(Int_t binx, Int_t biny, Int_t binz, Double_t error)
 see convention for numbering bins in TH1::GetBin
void SetCellError(Int_t binx, Int_t biny, Double_t content)
 see convention for numbering bins in TH1::GetBin
void SetBinContent(Int_t bin, Double_t content)
 see convention for numbering bins in TH1::GetBin
TH1 * ShowBackground(Int_t niter = 20, Option_t* option = "same")
   This function calculates the background spectrum in this histogram.
   The background is returned as a histogram.

   Function parameters:
   -niter, number of iterations (default value = 2)
      Increasing niter make the result smoother and lower.
   -option: may contain one of the following options
      - to set the direction parameter
        "BackDecreasingWindow". By default the direction is BackIncreasingWindow
      - filterOrder-order of clipping filter,  (default "BackOrder2"
                  -possible values= "BackOrder4"
                                    "BackOrder6"
                                    "BackOrder8"
      - "nosmoothing"- if selected, the background is not smoothed
           By default the background is smoothed.
      - smoothWindow-width of smoothing window, (default is "BackSmoothing3")
                  -possible values= "BackSmoothing5"
                                    "BackSmoothing7"
                                    "BackSmoothing9"
                                    "BackSmoothing11"
                                    "BackSmoothing13"
                                    "BackSmoothing15"
      - "nocompton"- if selected the estimation of Compton edge
                  will be not be included   (by default the compton estimation is set)
      - "same" : if this option is specified, the resulting background
                 histogram is superimposed on the picture in the current pad.
                 This option is given by default.

  NOTE that the background is only evaluated in the current range of this histogram.
  i.e., if this has a bin range (set via h->GetXaxis()->SetRange(binmin, binmax),
  the returned histogram will be created with the same number of bins
  as this input histogram, but only bins from binmin to binmax will be filled
  with the estimated background.

Int_t ShowPeaks(Double_t sigma = 2, Option_t* option = "", Double_t threshold = 0.05)
Interface to TSpectrum::Search.
The function finds peaks in this histogram where the width is > sigma
and the peak maximum greater than threshold*maximum bin content of this.
For more details see TSpectrum::Search.
Note the difference in the default value for option compared to TSpectrum::Search
option="" by default (instead of "goff").
TH1* TransformHisto(TVirtualFFT* fft, TH1* h_output, Option_t* option)
For a given transform (first parameter), fills the histogram (second parameter)
with the transform output data, specified in the third parameter
If the 2nd parameter h_output is empty, a new histogram (TH1D or TH2D) is created
and the user is responsible for deleting it.
 Available options:
   "RE" - real part of the output
   "IM" - imaginary part of the output
   "MAG" - magnitude of the output
   "PH"  - phase of the output
Int_t AxisChoice(Option_t* axis) const
TH1& operator=(const TH1& )
void FillN(Int_t ntimes, const Double_t* x, const Double_t* w, Int_t stride = 1)
Int_t GetBufferLength() const
{return fBuffer ? (Int_t)fBuffer[0] : 0;}
Int_t GetBufferSize() const
{return fBufferSize;}
const Double_t * GetBuffer() const
{return fBuffer;}
TList * GetListOfFunctions() const
{ return fFunctions; }
Int_t GetNdivisions(Option_t* axis = "X") const
Color_t GetAxisColor(Option_t* axis = "X") const
Color_t GetLabelColor(Option_t* axis = "X") const
Style_t GetLabelFont(Option_t* axis = "X") const
Float_t GetLabelOffset(Option_t* axis = "X") const
Float_t GetLabelSize(Option_t* axis = "X") const
Style_t GetTitleFont(Option_t* axis = "X") const
Float_t GetTitleOffset(Option_t* axis = "X") const
Float_t GetTitleSize(Option_t* axis = "X") const
Float_t GetTickLength(Option_t* axis = "X") const
Float_t GetBarOffset() const
{return Float_t(0.001*Float_t(fBarOffset));}
Float_t GetBarWidth() const
{return Float_t(0.001*Float_t(fBarWidth));}
EBinErrorOpt GetBinErrorOption() const
{ return fBinStatErrOpt; }
TDirectory * GetDirectory() const
{return fDirectory;}
Int_t GetDimension() const
{ return fDimension; }
Double_t GetMaximumStored() const
{return fMaximum;}
Double_t GetMinimumStored() const
{return fMinimum;}
Int_t GetNbinsX() const
{return fXaxis.GetNbins();}
Int_t GetNbinsY() const
{return fYaxis.GetNbins();}
Int_t GetNbinsZ() const
{return fZaxis.GetNbins();}
Double_t GetNormFactor() const
{return fNormFactor;}
Option_t * GetOption() const
{return fOption.Data();}
Double_t GetStdDev(Int_t axis = 1) const
{ return GetRMS(axis); }
Double_t GetStdDevError(Int_t axis = 1) const
{ return GetRMSError(axis); }
TArrayD * GetSumw2()
{return &fSumw2;}
const TArrayD * GetSumw2() const
{return &fSumw2;}
Int_t GetSumw2N() const
{return fSumw2.fN;}
TH1 * RebinX(Int_t ngroup = 2, const char* newname = "")
{ return Rebin(ngroup,newname, (Double_t*) 0); }
void SetAxisColor(Color_t color = 1, Option_t* axis = "X")
void SetAxisRange(Double_t xmin, Double_t xmax, Option_t* axis = "X")
void SetBarOffset(Float_t offset = 0.25)
{fBarOffset = Short_t(1000*offset);}
void SetBarWidth(Float_t width = 0.5)
{fBarWidth = Short_t(1000*width);}
void SetBinsLength(Int_t = -1)
{ }
void SetBinErrorOption(TH1::EBinErrorOpt type)
{ fBinStatErrOpt = type; }
void SetEntries(Double_t n)
{fEntries = n;}
void SetLabelColor(Color_t color = 1, Option_t* axis = "X")
void SetLabelFont(Style_t font = 62, Option_t* axis = "X")
void SetLabelOffset(Float_t offset = 0.005, Option_t* axis = "X")
void SetLabelSize(Float_t size = 0.02, Option_t* axis = "X")
void SetNdivisions(Int_t n = 510, Option_t* axis = "X")
void SetNormFactor(Double_t factor = 1)
{fNormFactor = factor;}
void SetOption(Option_t* option = " ")
{fOption = option;}
void SetTickLength(Float_t length = 0.02, Option_t* axis = "X")
void SetTitleFont(Style_t font = 62, Option_t* axis = "X")
void SetTitleOffset(Float_t offset = 1, Option_t* axis = "X")
void SetTitleSize(Float_t size = 0.02, Option_t* axis = "X")
void SetXTitle(const char* title)
{fXaxis.SetTitle(title);}
void SetYTitle(const char* title)
{fYaxis.SetTitle(title);}
void SetZTitle(const char* title)
{fZaxis.SetTitle(title);}