[#0] WARNING:InputArguments -- The parameter 'sigma1' with range [-inf, inf] of the RooGaussian 'sig1' exceeds the safe range of (0, inf). Advise to limit its range. [#0] WARNING:InputArguments -- The parameter 'sigma2' with range [-inf, inf] of the RooGaussian 'sig2' exceeds the safe range of (0, inf). Advise to limit its range. [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'signalRange' created with bounds [4,6] [#1] INFO:Minimization -- p.d.f. provides expected number of events, including extended term in likelihood. [#1] INFO:Fitting -- RooAbsPdf::fitTo(model) fixing normalization set for coefficient determination to observables in data [#1] INFO:Fitting -- using generic CPU library compiled with no vectorizations [#1] INFO:Fitting -- Creation of NLL object took 532.881 μs [#1] INFO:Fitting -- RooAddition::defaultErrorLevel(nll_model_modelData) Summation contains a RooNLLVar, using its error level [#1] INFO:Minimization -- [fitFCN] No discrete parameters, performing continuous minimization only RooFitResult: minimized FCN value: -3872.49, estimated distance to minimum: 4.30406e-05 covariance matrix quality: Full, accurate covariance matrix Status : MINIMIZE=0 HESSE=0 Floating Parameter FinalValue +/- Error -------------------- -------------------------- a0 4.2647e-01 +/- 7.59e-02 a1 1.7594e-01 +/- 1.10e-01 nbkg 5.1101e+02 +/- 3.60e+01 nsig 4.8899e+02 +/- 3.57e+01 sig1frac 8.6392e-01 +/- 1.08e-01 [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'left' created with bounds [0,4] [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'right' created with bounds [6,10] [#1] INFO:Minimization -- p.d.f. provides expected number of events, including extended term in likelihood. [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'fit_nll_model_modelData_left' created with bounds [0,4] [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'fit_nll_model_modelData_right' created with bounds [6,10] [#1] INFO:Fitting -- RooAbsPdf::fitTo(model) fixing normalization set for coefficient determination to observables in data [#1] INFO:Fitting -- Creation of NLL object took 7.46789 ms [#1] INFO:Fitting -- RooAddition::defaultErrorLevel(nll_model_modelData) Summation contains a RooNLLVar, using its error level [#1] INFO:Minimization -- [fitFCN] No discrete parameters, performing continuous minimization only RooFitResult: minimized FCN value: -1134.15, estimated distance to minimum: 3.61209e-05 covariance matrix quality: Full, accurate covariance matrix Status : MINIMIZE=0 HESSE=0 Floating Parameter FinalValue +/- Error -------------------- -------------------------- a0 3.2415e-01 +/- 1.09e-01 a1 3.0373e-02 +/- 2.12e-01 nbkg 5.0182e+02 +/- 3.94e+01 nsig 4.1091e+02 +/- 2.63e+02 sig1frac 8.5838e-01 +/- 2.74e-01 [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f was fitted in a subrange and no explicit Range() and NormRange() was specified. Plotting / normalising in fit range. To override, do one of the following - Clear the automatic fit range attribute: .removeStringAttribute("fitrange"); - Explicitly specify the plotting range: Range(""). - Explicitly specify where to compute the normalisation: NormRange(""). The default (full) range can be denoted with Range("") / NormRange(""). [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "a1" is invalid because the variations (-0.139452, 0.200199) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "sig1frac" is invalid because the variations (0.543771, 1.173) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "a1" is invalid because the variations (-0.139452, 0.200199) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "sig1frac" is invalid because the variations (0.543771, 1.173) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:InputArguments -- RooAbsPdf::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f was fitted in a subrange and no explicit Range() and NormRange() was specified. Plotting / normalising in fit range. To override, do one of the following - Clear the automatic fit range attribute: .removeStringAttribute("fitrange"); - Explicitly specify the plotting range: Range(""). - Explicitly specify where to compute the normalisation: NormRange(""). The default (full) range can be denoted with Range("") / NormRange(""). [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData_left,fit_nll_model_modelData_right' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument NormRange is duplicated [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'leftToMiddle' created with bounds [0,5] [#1] INFO:Minimization -- p.d.f. provides expected number of events, including extended term in likelihood. [#1] INFO:Eval -- RooRealVar::setRange(x) new range named 'fit_nll_model_modelData' created with bounds [0,5] [#1] INFO:Fitting -- RooAbsPdf::fitTo(model) fixing normalization set for coefficient determination to observables in data [#1] INFO:Fitting -- Creation of NLL object took 395.952 μs [#1] INFO:Fitting -- RooAddition::defaultErrorLevel(nll_model_modelData) Summation contains a RooNLLVar, using its error level [#1] INFO:Minimization -- [fitFCN] No discrete parameters, performing continuous minimization only RooFitResult: minimized FCN value: -1620.17, estimated distance to minimum: 0.000658484 covariance matrix quality: Full, accurate covariance matrix Status : MINIMIZE=0 HESSE=0 Floating Parameter FinalValue +/- Error -------------------- -------------------------- a0 7.0685e-01 +/- 7.00e-01 a1 2.2397e-01 +/- 6.03e-01 nbkg 7.1175e+02 +/- 1.22e+03 nsig 4.4359e+02 +/- 1.28e+02 sig1frac 9.7243e-01 +/- 8.92e-01 [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f was fitted in a subrange and no explicit Range() and NormRange() was specified. Plotting / normalising in fit range. To override, do one of the following - Clear the automatic fit range attribute: .removeStringAttribute("fitrange"); - Explicitly specify the plotting range: Range(""). - Explicitly specify where to compute the normalisation: NormRange(""). The default (full) range can be denoted with Range("") / NormRange(""). [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "a0" is invalid because the variations (-0.737674, 2.15138) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "a1" is invalid because the variations (-0.297021, 0.744954) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "nbkg" is invalid because the variations (-560.539, 1984.04) are outside the defined range [0, 10000]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#0] WARNING:Plotting -- RooAbsReal::plotOn(model): the 1-sigma error band for the parameter "sig1frac" is invalid because the variations (0.659923, 1.28494) are outside the defined range [0, 1]! The variations will be clipped inside the range. This might or might not be acceptable in your usecase. [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData' [#0] WARNING:InputArguments -- RooAbsReal::plotOn(model) WARNING: argument CurveNameSuffix is duplicated [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f was fitted in a subrange and no explicit Range() and NormRange() was specified. Plotting / normalising in fit range. To override, do one of the following - Clear the automatic fit range attribute: .removeStringAttribute("fitrange"); - Explicitly specify the plotting range: Range(""). - Explicitly specify where to compute the normalisation: NormRange(""). The default (full) range can be denoted with Range("") / NormRange(""). [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) only plotting range 'fit_nll_model_modelData' [#1] INFO:Plotting -- RooAbsPdf::plotOn(model) p.d.f. curve is normalized using explicit choice of ranges 'fit_nll_model_modelData'