I tried using "b" option too. It didn't change things. I'll try moving to
a newer release. I have been using 2.25-03.
Thanks, Art S.
A.E. Snyder, Group EC \!c*p?/
SLAC Mail Stop #95 ((. .))
Box 4349 |
Stanford, Ca, USA, 94309 '\|/`
e-mail:snyder@slac.stanford.edu o
phone:650-926-2701 _
http://www.slac.stanford.edu/~snyder BaBar
FAX:650-926-2657 Collaboration
On Mon, 3 Dec 2001, Rene Brun wrote:
> Art,
>
> Here is a small example:
>
> void fixp() {
> TH1F *h = new TH1F("h","test",100,-4,4);
> h->FillRandom("gaus",5000);
> TF1 *e = new TF1("e","pol4",-1,1);
> e->FixParameter(0,160);
> h->Fit("e","br");
> }
>
> Using the option "b" (Boundary) is important. The documentation of TH1::Fit
> says:
>
> //*-* Setting initial conditions
> //*-* ==========================
> //*-* Parameters must be initialized before invoking the Fit function.
> //*-* The setting of the parameter initial values is automatic for the
> //*-* predefined functions : poln, expo, gaus. One can however disable
> //*-* this automatic computation by specifying the option "B".
> //*-* You can specify boundary limits for some or all parameters via
> //*-* f1->SetParLimits(p_number, parmin, parmax);
> //*-* if parmin>=parmax, the parameter is fixed
> //*-* Note that you are not forced to fix the limits for all parameters.
> //*-* For example, if you fit a function with 6 parameters, you can do:
> //*-* func->SetParameters(0,3.1,1.e-6,-1.5,0,100);
> //*-* func->SetParLimits(3,-10,-4);
> //*-* func->FixParameter(4,0);
> //*-* func->SetParLimits(5, 1,1);
> //*-* With this setup, parameters 0->2 can vary freely
> //*-* Parameter 3 has boundaries [-10,-4] with initial value -8
> //*-* Parameter 4 is fixed to 0
> //*-* Parameter 5 is fixed to 100.
> //*-* When the lower limit and upper limit are equal, the parameter is fixed.
> //*-* However to fix a parameter to 0, one must call the FixParameter
> function.
>
> Rene Brun
>
>
> Arthur E. Snyder wrote:
> >
> > The SetParLimits function really seems to be totally ineffective:
> >
> > root [180] efit->GetParameter(0)
> > (Double_t)5.89071269118343935e+02
> > root [181] efit->SetParameter(0,2.0)
> > root [182] efit->GetParameter(0)
> > (Double_t)2.00000000000000000e+00
> > root [183] efit->SetParLimits(0,1.0,1.0)
> >
> > -so parmeter 0 of this function (a "pol4") should be fixed to 2.0
> >
> > root [184] bhist->Fit("e") [note a]
> > FCN=66.7558 FROM MIGRAD STATUS=CONVERGED 134 CALLS 135
> > TOTAL
> > EDM=5.71703e-14 STRATEGY= 1 ERR MATRIX NOT
> > POS-DEF
> > EXT PARAMETER APPROXIMATE STEP FIRST
> > NO. NAME VALUE ERROR SIZE DERIVATIVE
> > 1 p0 5.89071e+02 fixed
> > 2 p1 -3.16776e+03 2.00304e+00 1.51050e-03 8.00435e-08
> > 3 p2 6.43575e+03 3.89200e+00 3.06881e-03 -8.40017e-09
> > 4 p3 -5.79772e+03 4.44730e+00 2.76457e-03 9.71526e-09
> > 5 p4 1.94450e+03 3.58314e+00 1.54134e-03 6.48922e-08
> >
> > -it fits parameter 0 though claiming it is fixed!?
> >
> > -am I doing somthing real stupid or is this a bug?
> >
> > Art S.
> >
> > note a: "e" is the name I gave the TF1 function *efit. BTW, the function
> > TH1::Fit(TF1*) also seems to be missing in action, so I have to use the
> > one that finds the function by name rather than pointer.
> >
> > A.E. Snyder, Group EC \!c*p?/
> > SLAC Mail Stop #95 ((. .))
> > Box 4349 |
> > Stanford, Ca, USA, 94309 '\|/`
> > e-mail:snyder@slac.stanford.edu o
> > phone:650-926-2701 _
> > http://www.slac.stanford.edu/~snyder BaBar
> > FAX:650-926-2657 Collaboration
> >
> > On Sun, 2 Dec 2001, Rene Brun wrote:
> >
> > > Art,
> > >
> > > Even in PAW, people included the Minuit commands in a KUIP macro.
> > > You should do the same. However, currently, it is not easy to get
> > > the control after each iteration. You get the control only at the end
> > > of the fit, unless you implement your own fitting model (like
> > > H1FitChisquare or likelihood). One could imagine a new option
> > > to force a call to a function or macro after each iteration.
> > > If there are more suggestions, they are welcome.
> > >
> > > Rene Brun
> > >
> > > On Sun, 2 Dec 2001, Arthur E. Snyder wrote:
> > >
> > > > Hi Rene,
> > > >
> > > > I was able to grab gMinuit and use mnexcm to execute minuit commands, refit,
> > > > etc. It is pretty awkward interactively, but works. However, the results do
> > > > not propagate back to the function attached to my histogram, so when I
> > > > redraw it I see the result of the original default fit. Also, if I refit it
> > > > seems to start again from scratch and forget any 'fix' or 'set par' I've
> > > > done to gMinuit object.
> > > >
> > > > Perhaps, I would be better off using the get/set functions provided in TF1?
> > > > It looks pretty easy to write my own little macro to manipulate these
> > > > functions with minimal typing ...
> > > >
> > > > Art
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Rene Brun" <brun@pcbrun.cern.ch>
> > > > To: "Arthur E. Snyder" <snyder@SLAC.Stanford.EDU>
> > > > Cc: <roottalk@pcroot.cern.ch>
> > > > Sent: Sunday, December 02, 2001 1:39 PM
> > > > Subject: Re: [ROOT] Interactive minuit access from ROOT?
> > > >
> > > >
> > > > > Use the global gMinuit
> > > > >
> > > > > Rene Brun
> > > > >
> > > > > On Sun, 2 Dec 2001, Arthur E. Snyder wrote:
> > > > >
> > > > > > Thanks, Rene. Can you tell me how I access TMinuit object when I'm
> > > > fitting a
> > > > > > histogram? I don't find an assessor either in TF1 or TH1. I've also
> > > > looked
> > > > > > up the inheritance tree but don't find anything that looks like the
> > > > right
> > > > > > thing.
> > > > > >
> > > > > > Art
> > > > > >
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Rene Brun" <brun@pcbrun.cern.ch>
> > > > > > To: "Arthur E. Snyder" <snyder@SLAC.Stanford.EDU>
> > > > > > Cc: <roottalk@pcroot.cern.ch>
> > > > > > Sent: Sunday, December 02, 2001 9:49 AM
> > > > > > Subject: Re: [ROOT] Interactive minuit access from ROOT?
> > > > > >
> > > > > >
> > > > > > > Hi Art,
> > > > > > >
> > > > > > > The direct equivalent of PAW option "M" does not exist.
> > > > > > > However, you can invoke any function from TMinuit directly.
> > > > > > > This should provide even more flexibility at the expense
> > > > > > > of slightly more typing.
> > > > > > >
> > > > > > > Rene Brun
> > > > > > >
> > > > > > > On Sat, 1 Dec 2001, Arthur E. Snyder wrote:
> > > > > > >
> > > > > > > > Try again to post this with more sensible subject line!
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "Arthur E. Snyder" <snyder@SLAC.Stanford.EDU>
> > > > > > > > To: <roottalk@pcroot.cern.ch>
> > > > > > > > Sent: Saturday, December 01, 2001 12:29 AM
> > > > > > > > Subject: Re: [ROOT] tiny Bug in root
> > > > > > > >
> > > > > > > >
> > > > > > > > > Is it possible to invoke interactive minuit from within ROOT?
> > > > I.e.,
> > > > > > the
> > > > > > > > > equivalent of 'h/fit 100 myfunc.f m' in paw? The ROOT fit provides
> > > > > > most of
> > > > > > > > > the options of paw, but not this one. The 'm' option in ROOT seems
> > > > to
> > > > > > be
> > > > > > > > > something different.
> > > > > > > > >
> > > > > > > > > I've looked in TMinuit, TF, and TH1 classes, but have not been
> > > > able to
> > > > > > > > find
> > > > > > > > > anyway to get to the interactive interface of minuit or some
> > > > > > alternative.
> > > > > > > > >
> > > > > > > > > Art Snyder at SLAC
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > >
>
This archive was generated by hypermail 2b29 : Tue Jan 01 2002 - 17:51:10 MET