RE: ACLIC in winxp

Date: Fri, 18 Feb 2005 16:28:02 +0100 (CET)

Here is what I got in the command prompt:

C>vcvars32.bat
Setting environment for using Microsoft Visual C++ tools.

C>set
PATH=
COMSPEC=\COMMAND.COM C>

I hope I did exactly the same that you asked from me...

Balint

On Fri, 18 Feb 2005, Faine, Valeri wrote:

> Hello
>
> > Now, everything works fine, but the question is still there:
> > Why doesn't that vcvars32.bat file set the env.vars?
>
> Please elaborate a little bit to explain how you used "vcvars32.bat"
>
> FYI: Vcvars32.bat does set the variables for one single console session.
>
> Is it what you are complaining about. I mean you
> 1. opened the console window.
> 2. invoked that "command file"
> 3. typed "set"
> 4. did not see any VC++ - related env variables like "INCLUDE" / "LIB"
> and "PATH"
> ????
>
> Thank you.
>
> ----
> Best regards
> Valeri
>
>
> > -----Original Message-----
> > From: owner-roottalk_at_pcroot.cern.ch [mailto:owner-roottalk_at_pcroot.cern.ch]
> On
> > Behalf Of Balint Radics
> > Sent: Friday, February 18, 2005 6:29 AM
> > To: Philippe Canal
> > Cc: 'Olivier Couet'; roottalk_at_pcroot.cern.ch
> > Subject: RE: [ROOT] ACLIC in winxp
> >
> >
> > Hi,
> >
> > So, it works now! Let me tell you what I did for it.
> >
> > First of all I had a good feeling that I shouldn't use the newest Root
> > 4.03/02 so I installed the 3.04/02, because it affors itself with VC++ 6.0
> > which I possess. The 4.03/02 recommends usage with VC++ 7.0. At least I
> > clearly used those versions that match.
> >
> > After this I got the same error messages that I had got before. Well, that
> > was the point when I started to suspect that something must be really
> > wrong with the vcvars32.bat file. I checked it again, but every env.var.
> > was set to those paths where the ACLIC didn't find the necessary files.
> > Okay, I went to System->Advanced->Env.Var. and put there the same
> > Env.Vars that should have been set by the vcvars32.bat file, but which -
> > for some reason that I don't know - didn't work.
> >
> > Now, everything works fine, but the question is still there: Why doesn't
> > that vcvars32.bat file set the env.vars?
> >
> > Cheers and Thanks to everyone for Your help! :)
> >
> > Balint
> >
> > On Thu, 17 Feb 2005, Philippe Canal wrote:
> >
> > > Hi,
> > >
> > > Most likely you have not set all the Microsoft related environment
> variables
> > > (in particular probably not the INCLUDE). Make sure you look carefully
> at
> > > vcvars32.bat
> > >
> > > Cheers,
> > > Philippe.
> > >
> > > -----Original Message-----
> > > Sent: Thursday, February 17, 2005 11:23 AM
> > > To: Philippe Canal
> > > Cc: 'Olivier Couet'; roottalk_at_pcroot.cern.ch
> > > Subject: RE: [ROOT] ACLIC in winxp
> > >
> > >
> > > Thanx.
> > > Now, I checked the env.variables again. Now the ACLIC says:
> > >
> > > root [0] .L egy.cxx+
> > > Info in <TWinNTSystem::ACLiC>: creating shared library
> > > C:\root\macros\egy_cxx.dll
> > > 2246846_cint.cxx
> > > s1os_.cxx
> > > C:\root\macros\s1os_.h(10) : fatal error C1083: Cannot open include
> file:
> > > 'stddef.h': No such file or directory
> > > Error in <ACLiC>: Compilation failed!
> > >
> > >
> > > Now, it seems better! It could call the C++ compiler c1. Well, there is
> > > still some problem...
> > >
> > > Balint
> > >
> > >
> > > On Thu, 17 Feb 2005, Philippe Canal wrote:
> > >
> > > > Hi,
> > > >
> > > > ACLiC calls the compiler. 'cl' is the name of the executable for
> > > > Microsoft's C++ compiler.
> > > > In order for this to work correctly you need to have cl.exe in a
> directory
> > > > in your PATH.
> > > > Microsoft provides a script usually name vcvars32.bat to set the
> proper
> > > > variable for the compiler.
> > > >
> > > > Cheers,
> > > > Philippe.
> > > >
> > > > -----Original Message-----
> > > > From: owner-roottalk_at_pcroot.cern.ch
> [mailto:owner-roottalk_at_pcroot.cern.ch]
> > > > On Behalf Of Balint Radics
> > > > Sent: Thursday, February 17, 2005 8:04 AM
> > > > To: Olivier Couet
> > > > Cc: roottalk_at_pcroot.cern.ch
> > > > Subject: Re: [ROOT] ACLIC in winxp
> > > >
> > > >
> > > > I changed the install directory to another one with no spaces. No it
> sais:
> > > >
> > > > root [0] .L pl.C+
> > > > Info in <TWinNTSystem::ACLiC>: creating shared library
> > > > E:\ROOT\macros\pl_C.dll
> > > > 'cl' is not recognized as an internal or external command,
> > > > operable program or batch file.
> > > > 'cl' is not recognized as an internal or external command,
> > > > operable program or batch file.
> > > > 'cl' is not recognized as an internal or external command,
> > > > operable program or batch file.
> > > > 'cl' is not recognized as an internal or external command,
> > > > operable program or batch file.
> > > > 'cl' is not recognized as an internal or external command,
> > > > operable program or batch file.
> > > > Error in <ACLiC>: Compilation failed!
> > > >
> > > > How can I check inside the CINT how my environment variables are set?
> > > > This is Qt Root but the whole thing should be the same, I mean the
> > > > env.variables, the same as in the case of Root under cygwin. In this
> case
> > > > (Qt Root) I can set them through the Control Panel->System->Advanced->
> > > > ->Env.Variables and there is the system.rootrc file
> > > > in the \$ROOTSYS/etc also. I don't understand what the error message
> > > > either:"cl is not recognized ... etc.". What is c1?
> > > >
> > > > Balint
> > > >
> > > >
> > > >
> > > > On Thu, 17 Feb 2005, Olivier Couet wrote:
> > > >
> > > > >
> > > > > Hi,
> > > > >
> > > > > I have tried your little example on both linux and XP with root
> 4.03/02
> > >
> > > > > and for me it works fine. Are your environment variables ROOTSYS etc
> ...
> > >
> > > > > defined correctly ?
> > > > > I am not sure if the spaces in the path might be or not a problem.
> In my
> > >
> > > > > case I am using ROOT on XP in the cygwin environment and the PATH is
> > > > > /home/Administrator/roottest (no spaces).
> > > > >
> > > > > Cheers, Olivier
> > > > >
> > > > > On Thu, 17 Feb 2005, Balint Radics wrote:
> > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I wrote a code that uses only TFile and TH1F calsses:
> > > > > >
> > > > > > #include <TFile.h>
> > > > > > #include <TH1F.h>
> > > > > >
> > > > > > void pl(){
> > > > > > TFile * f = new TFile("file.root", "recreate");
> > > > > > TH1F * h = new TH1F("h","h",100,0,100);
> > > > > > for(int i = 0; i < 100; i++){
> > > > > > h->SetBinContent(i,i);
> > > > > > }
> > > > > > f->Write();
> > > > > > }
> > > > > >
> > > > > > I tried to compile it, but I got this error message from ACLIC in
> > > CINT:
> > > > > >
> > > > > > root [0] .L pl.C++
> > > > > > Info in <TWinNTSystem::ACLiC>: creating shared library C:\Program
> > > > Files\BNL\ROOT
> > > > > > \macros\pl_C.dll
> > > > > > Error: rootcint: The input list file C:\Program.in does not exist
> > > > > > Error in <ACLiC>: Dictionary generation failed!
> > > > > > Info in <ACLiC>: Invoking compiler to check macro's validity
> > > > > > 'cl' is not recognized as an internal or external command,
> > > > > > operable program or batch file.
> > > > > >
> > > > > > What's wrong in here? Maybe the " " space in the 'Program Files'
> > > > > > directory?
> > > > > >
> > > > > > Balint
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Org: CERN - European Laboratory for Particle Physics.
> > > > > Mail: 1211 Geneve 23 - Switzerland Mailbox:
> J25910
> > > >
> > > > > E-Mail: Olivier.Couet_at_cern.ch Phone:
> +41 22
> > > > 7676522
> > > > > WWW: http://cern.ch/Olivier.Couet/ Fax:
> +41 22
> > > > 7670300
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
>
Received on Fri Feb 18 2005 - 16:28:06 MET

This archive was generated by hypermail 2.2.0 : Tue Jan 02 2007 - 14:45:05 MET