Logo ROOT   6.12/07
Reference Guide
TGeoPcon.h
Go to the documentation of this file.
1 // @(#)root/geom:$Id$
2 // Author: Andrei Gheata 24/10/01
3 
4 /*************************************************************************
5  * Copyright (C) 1995-2000, Rene Brun and Fons Rademakers. *
6  * All rights reserved. *
7  * *
8  * For the licensing terms see $ROOTSYS/LICENSE. *
9  * For the list of contributors see $ROOTSYS/README/CREDITS. *
10  *************************************************************************/
11 
12 #ifndef ROOT_TGeoPcon
13 #define ROOT_TGeoPcon
14 
15 #include "TGeoBBox.h"
16 
17 class TGeoPcon : public TGeoBBox
18 {
19 protected:
20  // data members
21  Int_t fNz; // number of z planes (at least two)
22  Double_t fPhi1; // lower phi limit (converted to [0,2*pi)
23  Double_t fDphi; // phi range
24  Double_t *fRmin; //[fNz] pointer to array of inner radii
25  Double_t *fRmax; //[fNz] pointer to array of outer radii
26  Double_t *fZ; //[fNz] pointer to array of Z planes positions
27  Bool_t fFullPhi; //! Full phi range flag
28  Double_t fC1; //! Cosine of phi1
29  Double_t fS1; //! Sine of phi1
30  Double_t fC2; //! Cosine of phi1+dphi
31  Double_t fS2; //! Sine of phi1+dphi
32  Double_t fCm; //! Cosine of (phi1+phi2)/2
33  Double_t fSm; //! Sine of (phi1+phi2)/2
34  Double_t fCdphi; //! Cosine of dphi
35 
36  // methods
37  TGeoPcon(const TGeoPcon&);
38  TGeoPcon& operator=(const TGeoPcon&);
39 
40 public:
41  // constructors
42  TGeoPcon();
43  TGeoPcon(Double_t phi, Double_t dphi, Int_t nz);
44  TGeoPcon(const char *name, Double_t phi, Double_t dphi, Int_t nz);
45  TGeoPcon(Double_t *params);
46  // destructor
47  virtual ~TGeoPcon();
48  // methods
49  virtual Double_t Capacity() const;
50  virtual void ComputeBBox();
51  virtual void ComputeNormal(const Double_t *point, const Double_t *dir, Double_t *norm);
52  virtual void ComputeNormal_v(const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize);
53  virtual Bool_t Contains(const Double_t *point) const;
54  virtual void Contains_v(const Double_t *points, Bool_t *inside, Int_t vecsize) const;
55  virtual void DefineSection(Int_t snum, Double_t z, Double_t rmin, Double_t rmax);
56  virtual Double_t DistFromInside(const Double_t *point, const Double_t *dir, Int_t iact=1,
57  Double_t step=TGeoShape::Big(), Double_t *safe=0) const;
58  virtual void DistFromInside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const;
59  virtual Double_t DistFromOutside(const Double_t *point, const Double_t *dir, Int_t iact=1,
60  Double_t step=TGeoShape::Big(), Double_t *safe=0) const;
61  virtual void DistFromOutside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const;
62  Double_t DistToSegZ(const Double_t *point, const Double_t *dir, Int_t &iz) const;
63  virtual Int_t DistancetoPrimitive(Int_t px, Int_t py);
64  virtual TGeoVolume *Divide(TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv,
65  Double_t start, Double_t step);
66  virtual const char *GetAxisName(Int_t iaxis) const;
67  virtual Double_t GetAxisRange(Int_t iaxis, Double_t &xlo, Double_t &xhi) const;
68  virtual void GetBoundingCylinder(Double_t *param) const;
69  virtual const TBuffer3D &GetBuffer3D(Int_t reqSections, Bool_t localFrame) const;
70  virtual Int_t GetByteCount() const {return 60+12*fNz;}
71  Double_t GetPhi1() const {return fPhi1;}
72  Double_t GetDphi() const {return fDphi;}
73  Int_t GetNz() const {return fNz;}
74  virtual Int_t GetNsegments() const;
75  Double_t *GetRmin() const {return fRmin;}
76  Double_t GetRmin(Int_t ipl) const;
77  Double_t *GetRmax() const {return fRmax;}
78  Double_t GetRmax(Int_t ipl) const;
79  Double_t *GetZ() const {return fZ;}
80  Double_t GetZ(Int_t ipl) const;
81  virtual TGeoShape *GetMakeRuntimeShape(TGeoShape * /*mother*/, TGeoMatrix * /*mat*/) const {return 0;}
82  virtual Int_t GetNmeshVertices() const;
83  virtual Bool_t GetPointsOnSegments(Int_t /*npoints*/, Double_t * /*array*/) const {return kFALSE;}
84  virtual void GetMeshNumbers(Int_t &nvert, Int_t &nsegs, Int_t &npols) const;
85  virtual void InspectShape() const;
86  virtual Bool_t IsCylType() const {return kTRUE;}
87  virtual TBuffer3D *MakeBuffer3D() const;
88  Double_t &Phi1() {return fPhi1;}
89  Double_t &Dphi() {return fDphi;}
90  Double_t &Rmin(Int_t ipl) {return fRmin[ipl];}
91  Double_t &Rmax(Int_t ipl) {return fRmax[ipl];}
92  Double_t &Z(Int_t ipl) {return fZ[ipl];}
93  virtual Double_t Safety(const Double_t *point, Bool_t in=kTRUE) const;
94  virtual void Safety_v(const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const;
95  Double_t SafetyToSegment(const Double_t *point, Int_t ipl, Bool_t in=kTRUE, Double_t safmin=TGeoShape::Big()) const;
96  virtual void SavePrimitive(std::ostream &out, Option_t *option = "");
97  virtual void SetDimensions(Double_t *param);
98  virtual void SetPoints(Double_t *points) const;
99  virtual void SetPoints(Float_t *points) const;
100  virtual void SetSegsAndPols(TBuffer3D &buff) const;
101  virtual void Sizeof3D() const;
102 
103  ClassDef(TGeoPcon, 1) // polycone class
104 };
105 
106 #endif
virtual Double_t GetAxisRange(Int_t iaxis, Double_t &xlo, Double_t &xhi) const
Get range of shape for a given axis.
Definition: TGeoPcon.cxx:767
Double_t * GetZ() const
Definition: TGeoPcon.h:79
Box class.
Definition: TGeoBBox.h:17
Double_t GetDphi() const
Definition: TGeoPcon.h:72
Double_t fC2
Sine of phi1.
Definition: TGeoPcon.h:30
virtual Double_t Safety(const Double_t *point, Bool_t in=kTRUE) const
computes the closest distance from given point to this shape, according to option.
Definition: TGeoPcon.cxx:1098
Double_t fDphi
Definition: TGeoPcon.h:23
virtual void SetDimensions(Double_t *param)
Set polycone dimensions starting from an array.
Definition: TGeoPcon.cxx:1208
Double_t fC1
Full phi range flag.
Definition: TGeoPcon.h:28
TGeoPcon()
dummy ctor
Definition: TGeoPcon.cxx:68
virtual Int_t GetByteCount() const
Definition: TGeoPcon.h:70
float Float_t
Definition: RtypesCore.h:53
const char Option_t
Definition: RtypesCore.h:62
Geometrical transformation package.
Definition: TGeoMatrix.h:40
Double_t fS2
Cosine of phi1+dphi.
Definition: TGeoPcon.h:31
virtual ~TGeoPcon()
destructor
Definition: TGeoPcon.cxx:252
A polycone.
Definition: TGeoPcon.h:17
Double_t SafetyToSegment(const Double_t *point, Int_t ipl, Bool_t in=kTRUE, Double_t safmin=TGeoShape::Big()) const
Compute safety from POINT to segment between planes ipl, ipl+1 within safmin.
Definition: TGeoPcon.cxx:1065
TGeoVolume, TGeoVolumeMulti, TGeoVolumeAssembly are the volume classes.
Definition: TGeoVolume.h:48
virtual void ComputeNormal(const Double_t *point, const Double_t *dir, Double_t *norm)
Compute normal to closest surface from POINT.
Definition: TGeoPcon.cxx:355
virtual Int_t GetNsegments() const
Returns number of segments on each mesh circle segment.
Definition: TGeoPcon.cxx:653
virtual Double_t DistFromInside(const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=0) const
compute distance from inside point to surface of the polycone
Definition: TGeoPcon.cxx:469
Double_t & Rmin(Int_t ipl)
Definition: TGeoPcon.h:90
int Int_t
Definition: RtypesCore.h:41
Double_t fS1
Cosine of phi1.
Definition: TGeoPcon.h:29
bool Bool_t
Definition: RtypesCore.h:59
Double_t & Phi1()
Definition: TGeoPcon.h:88
TGeoPcon & operator=(const TGeoPcon &)
assignment operator
Definition: TGeoPcon.cxx:227
virtual TBuffer3D * MakeBuffer3D() const
Creates a TBuffer3D describing this shape.
Definition: TGeoPcon.cxx:865
virtual void Contains_v(const Double_t *points, Bool_t *inside, Int_t vecsize) const
Check the inside status for each of the points in the array.
Definition: TGeoPcon.cxx:1395
virtual Int_t DistancetoPrimitive(Int_t px, Int_t py)
compute closest distance from point px,py to each corner
Definition: TGeoPcon.cxx:459
virtual void GetBoundingCylinder(Double_t *param) const
Fill vector param[4] with the bounding cylinder parameters.
Definition: TGeoPcon.cxx:791
Double_t & Dphi()
Definition: TGeoPcon.h:89
#define ClassDef(name, id)
Definition: Rtypes.h:320
Int_t GetNz() const
Definition: TGeoPcon.h:73
virtual Bool_t Contains(const Double_t *point) const
test if point is inside this shape check total z range
Definition: TGeoPcon.cxx:417
virtual void SavePrimitive(std::ostream &out, Option_t *option="")
Save a primitive as a C++ statement(s) on output stream "out".
Definition: TGeoPcon.cxx:1187
Double_t fCm
Sine of phi1+dphi.
Definition: TGeoPcon.h:32
virtual void InspectShape() const
print shape parameters
Definition: TGeoPcon.cxx:849
virtual Int_t GetNmeshVertices() const
Return number of vertices of the mesh representation.
Definition: TGeoPcon.cxx:1303
point * points
Definition: X3DBuffer.c:20
Double_t * GetRmax() const
Definition: TGeoPcon.h:77
virtual void Sizeof3D() const
fill size of this 3-D object
Definition: TGeoPcon.cxx:1313
virtual const TBuffer3D & GetBuffer3D(Int_t reqSections, Bool_t localFrame) const
Fills a static 3D buffer and returns a reference.
Definition: TGeoPcon.cxx:1333
Double_t * GetRmin() const
Definition: TGeoPcon.h:75
virtual void DistFromOutside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const
Compute distance from array of input points having directions specified by dirs. Store output in dist...
Definition: TGeoPcon.cxx:1421
Base abstract class for all shapes.
Definition: TGeoShape.h:25
Bool_t fFullPhi
Definition: TGeoPcon.h:27
virtual void Safety_v(const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const
Compute safe distance from each of the points in the input array.
Definition: TGeoPcon.cxx:1431
virtual TGeoVolume * Divide(TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
Divide this polycone shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step.
Definition: TGeoPcon.cxx:666
virtual const char * GetAxisName(Int_t iaxis) const
Returns name of axis IAXIS.
Definition: TGeoPcon.cxx:750
Double_t fPhi1
Definition: TGeoPcon.h:22
virtual void SetSegsAndPols(TBuffer3D &buff) const
Fill TBuffer3D structure for segments and polygons.
Definition: TGeoPcon.cxx:893
Int_t fNz
Definition: TGeoPcon.h:21
virtual void ComputeBBox()
compute bounding box of the pcon Check if the sections are in increasing Z order
Definition: TGeoPcon.cxx:285
Generic 3D primitive description class.
Definition: TBuffer3D.h:17
virtual Bool_t IsCylType() const
Definition: TGeoPcon.h:86
const Bool_t kFALSE
Definition: RtypesCore.h:88
Double_t * fZ
Definition: TGeoPcon.h:26
Double_t GetPhi1() const
Definition: TGeoPcon.h:71
virtual void SetPoints(Double_t *points) const
create polycone mesh points
Definition: TGeoPcon.cxx:1246
double Double_t
Definition: RtypesCore.h:55
static Double_t Big()
Definition: TGeoShape.h:88
you should not use this method at all Int_t Int_t z
Definition: TRolke.cxx:630
Double_t & Z(Int_t ipl)
Definition: TGeoPcon.h:92
virtual void DistFromInside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const
Compute distance from array of input points having directions specified by dirs. Store output in dist...
Definition: TGeoPcon.cxx:1413
virtual Double_t DistFromOutside(const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=0) const
compute distance from outside point to surface of the tube
Definition: TGeoPcon.cxx:573
Double_t * fRmax
Definition: TGeoPcon.h:25
virtual Double_t Capacity() const
Computes capacity of the shape in [length^3].
Definition: TGeoPcon.cxx:262
virtual void DefineSection(Int_t snum, Double_t z, Double_t rmin, Double_t rmax)
Defines z position of a section plane, rmin and rmax at this z.
Definition: TGeoPcon.cxx:618
virtual void GetMeshNumbers(Int_t &nvert, Int_t &nsegs, Int_t &npols) const
Returns numbers of vertices, segments and polygons composing the shape mesh.
Definition: TGeoPcon.cxx:1320
virtual void ComputeNormal_v(const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize)
Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coor...
Definition: TGeoPcon.cxx:1405
Double_t DistToSegZ(const Double_t *point, const Double_t *dir, Int_t &iz) const
compute distance to a pcon Z slice. Segment iz must be valid
Definition: TGeoPcon.cxx:533
Double_t & Rmax(Int_t ipl)
Definition: TGeoPcon.h:91
virtual Bool_t GetPointsOnSegments(Int_t, Double_t *) const
Fills array with n random points located on the line segments of the shape mesh.
Definition: TGeoPcon.h:83
Double_t * fRmin
Definition: TGeoPcon.h:24
const Bool_t kTRUE
Definition: RtypesCore.h:87
Double_t fSm
Cosine of (phi1+phi2)/2.
Definition: TGeoPcon.h:33
Double_t fCdphi
Sine of (phi1+phi2)/2.
Definition: TGeoPcon.h:34
char name[80]
Definition: TGX11.cxx:109
virtual TGeoShape * GetMakeRuntimeShape(TGeoShape *, TGeoMatrix *) const
In case shape has some negative parameters, these has to be computed in order to fit the mother...
Definition: TGeoPcon.h:81