Represents web window, which can be shown in web browser or any other supported environment.

Window can be configured to run either in the normal or in the batch (headless) mode. In second case no any graphical elements will be created. For the normal window one can configure geometry (width and height), which are applied when window shown.

Each window can be shown several times (if allowed) in different places - either as the CEF (chromium embedded) window or in the standard web browser. When started, window will open and show HTML page, configured with RWebWindow::SetDefaultPage() method.

Typically (but not necessarily) clients open web socket connection to the window and one can exchange data, using RWebWindow::Send() method and call-back function assigned via RWebWindow::SetDataCallBack().

Definition at line 53 of file RWebWindow.hxx.

Classes
struct	QueueEntry

struct	QueueItem

struct	WebConn

Public Member Functions
	RWebWindow ()
	RWebWindow constructor Should be defined here because of std::unique_ptr<RWebWindowWSHandler>

	~RWebWindow ()
	RWebWindow destructor Closes all connections and remove window from manager.

bool	CanSend (unsigned connid, bool direct=true) const
	returns true if sending via specified connection can be performed if direct==true, checks if direct sending (without queuing) is possible if connid==0, all existing connections are checked

void	CloseConnection (unsigned connid)
	Close specified connection Connection id usually appears in the correspondent call-backs.

void	CloseConnections ()
	Closes all connection to clients Normally leads to closing of all correspondent browser windows Some browsers (like firefox) do not allow by default to close window.

unsigned	FindBatch ()
	Returns connection id of batch job Connection to that job may not be initialized yet If connection does not exists, returns 0.

std::string	GetAddr () const
	Returns window address which is used in URL.

std::string	GetClientVersion () const
	Returns current client version.

unsigned	GetConnectionId (int num=0) const
	Returns connection for specified connection number Only active connections are returned - where clients confirms connection Total number of connections can be retrieved with NumConnections() method.

unsigned	GetConnLimit () const
	returns configured connections limit (0 - default)

unsigned	GetDisplayConnection () const
	Returns first connection id where window is displayed It could be that connection(s) not yet fully established - but also not timed out Batch jobs will be ignored here Returns 0 if connection not exists.

unsigned	GetHeight () const
	returns configured window height (0 - default)

unsigned	GetId () const
	Returns ID for the window - unique inside window manager.

unsigned	GetMaxQueueLength () const
	Return maximal queue length of data which can be held by window.

float	GetOperationTmout () const
	Returns timeout for synchronous WebWindow operations.

std::string	GetRelativeAddr (const std::shared_ptr< RWebWindow > &win) const
	Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

int	GetSendQueueLength (unsigned connid) const
	returns send queue length for specified connection if connid==0, maximal value for all connections is returned If wrong connection is specified, -1 is return

THttpServer *	GetServer ()
	Return THttpServer instance serving requests to the window.

std::string	GetUrl (bool remote=true)
	Return URL string to access web window If remote flag is specified, real HTTP server will be started automatically.

std::string	GetUserArgs () const
	Returns configured user arguments for web window See SetUserArgs method for more details.

unsigned	GetWidth () const
	returns configured window width (0 - default) actual window width can be different

bool	HasConnection (unsigned connid=0, bool only_active=true) const
	returns true if specified connection id exists connid is connection (0 - any) if only_active==false, also inactive connections check or connections which should appear

bool	IsNativeOnlyConn () const
	returns true if only native (own-created) connections are allowed

bool	IsShown () const
	Returns true when window was shown at least once.

unsigned	MakeBatch (bool create_new=false, const RWebDisplayArgs &args="")
	Create batch job for specified window Normally only single batch job is used, but many can be created See ROOT::Experimental::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

int	NumConnections (bool with_pending=false) const
	Returns current number of active clients connections.

void	RecordData (const std::string &fname="protocol.json", const std::string &fprefix="")
	Configures recording of communication data in protocol file Provided filename will be used to store JSON array with names of written files - text or binary If data was send from client, "send" entry will be placed.

void	Run (double tm=0.)
	Run window functionality for specified time If no action can be performed - just sleep specified time.

void	Send (unsigned connid, const std::string &data)
	Sends data to specified connection If connid==0, data will be send to all connections.

void	SendBinary (unsigned connid, const void *data, std::size_t len)
	Send binary data to specified connection If connid==0, data will be sent to all connections.

void	SendBinary (unsigned connid, std::string &&data)
	Send binary data to specified connection If connid==0, data will be sent to all connections.

void	SetCallBacks (WebWindowConnectCallback_t conn, WebWindowDataCallback_t data, WebWindowConnectCallback_t disconn=nullptr)
	Set call-backs function for connect, data and disconnect events.

void	SetClientVersion (const std::string &vers)
	Set client version, used as prefix in scripts URL When changed, web browser will reload all related JS files while full URL will be different Default is empty value - no extra string in URL Version should be string like "1.2" or "ver1.subv2" and not contain any special symbols.

void	SetConnectCallBack (WebWindowConnectCallback_t func)
	Set call-back function for new connection.

void	SetConnLimit (unsigned lmt=0)
	Configure maximal number of allowed connections - 0 is unlimited Will not affect already existing connections Default is 1 - the only client is allowed.

void	SetConnToken (const std::string &token="")
	Configures connection token (default none) When specified, in URL of webpage such token should be provided as &token=value parameter, otherwise web window will refuse connection.

void	SetDataCallBack (WebWindowDataCallback_t func)
	Set call-back function for data, received from the clients via websocket.

void	SetDefaultPage (const std::string &page)
	Set content of default window HTML page This page returns when URL address of the window will be requested Either HTML code or file name in the form "file:/home/user/data/file.htm" One also can using default locations like "file:rootui5sys/canv/canvas.html".

void	SetDisconnectCallBack (WebWindowConnectCallback_t func)
	Set call-back function for disconnecting.

void	SetGeometry (unsigned width, unsigned height)
	Set window geometry. Will be applied if supported by used web display (like CEF or Chromium)

void	SetMaxQueueLength (unsigned len=10)
	configures maximal queue length of data which can be held by window

void	SetNativeOnlyConn (bool on=true)
	configures that only native (own-created) connections are allowed

void	SetOperationTmout (float tm=50.)
	Set timeout for synchronous WebWindow operations.

void	SetPanelName (const std::string &name)
	Configure window to show some of existing JSROOT panels It uses "file:rootui5sys/panel/panel.html" as default HTML page At the moment only FitPanel is existing.

void	SetUserArgs (const std::string &args)
	Set arbitrary JSON code, which is accessible via conn.GetUserArgs() method This JSON code injected into main HTML document into JSROOT.connectWebWindow() Must be called before RWebWindow::Show() method is called.

unsigned	Show (const RWebDisplayArgs &args="")
	Show window in specified location See ROOT::Experimental::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

void	Sync ()
	Special method to process all internal activity when window runs in separate thread.

void	TerminateROOT ()
	Terminate ROOT session Tries to correctly close THttpServer, associated with RWebWindowsManager After that exit from process.

int	WaitFor (WebWindowWaitFunc_t check)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

int	WaitForTimed (WebWindowWaitFunc_t check)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

int	WaitForTimed (WebWindowWaitFunc_t check, double duration)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Static Public Member Functions
static std::shared_ptr< RWebWindow >	Create ()
	Create new RWebWindow Using default RWebWindowsManager.

static unsigned	ShowWindow (std::shared_ptr< RWebWindow > window, const RWebDisplayArgs &args="")
	Static method to show web window Has to be used instead of RWebWindow::Show() when window potentially can be embed into other windows Soon RWebWindow::Show() method will be done protected.

Private Types
using	ConnectionsList_t = std::vector< std::shared_ptr< WebConn > >

enum	EQueueEntryKind { kind_None , kind_Connect , kind_Data , kind_Disconnect }

using	timestamp_t = std::chrono::time_point< std::chrono::system_clock >

Private Member Functions
std::string	_MakeSendHeader (std::shared_ptr< WebConn > &conn, bool txt, const std::string &data, int chid)
	Prepare text part of send data Should be called under locked connection mutex.

unsigned	AddDisplayHandle (bool batch_mode, const std::string &key, std::unique_ptr< RWebDisplayHandle > &handle)
	Add display handle and associated key Key is random number generated when starting new window When client is connected, key should be supplied to correctly identify it.

unsigned	AddEmbedWindow (std::shared_ptr< RWebWindow > window, int channel)
	Add embed window.

void	AssignCallbackThreadId ()
	Assign thread id which has to be used for callbacks.

void	CheckDataToSend (bool only_once=false)
	Checks if new data can be send (internal use only) If necessary, provide credits to the client.

bool	CheckDataToSend (std::shared_ptr< WebConn > &conn)
	Checks if one should send data for specified connection Returns true when send operation was performed.

void	CheckInactiveConnections ()
	Check if there are connection which are inactive for longer time For instance, batch browser will be stopped if no activity for 30 sec is there.

void	CheckPendingConnections ()
	Check if started process(es) establish connection.

void	CompleteWSSend (unsigned wsid)

std::shared_ptr< RWebWindowWSHandler >	CreateWSHandler (std::shared_ptr< RWebWindowsManager > mgr, unsigned id, double tmout)
	Assigns manager reference, window id and creates websocket handler, used for communication with the clients.

std::shared_ptr< WebConn >	FindConnection (unsigned wsid)

std::shared_ptr< WebConn >	FindOrCreateConnection (unsigned wsid, bool make_new, const char *query)
	Find connection with given websocket id Connection mutex should be locked before method calling.

ConnectionsList_t	GetConnections (unsigned connid=0, bool only_active=false) const
	returns connection (or all active connections)

std::string	GetConnToken () const
	Returns configured connection token.

bool	HasKey (const std::string &key) const
	Returns true if provided key value already exists (in processes map or in existing connections)

void	InvokeCallbacks (bool force=false)
	Invoke callbacks with existing data Must be called from appropriate thread.

bool	ProcessBatchHolder (std::shared_ptr< THttpCallArg > &arg)
	Process special http request, used to hold headless browser running Such requests should not be replied for the long time Be aware that function called directly from THttpServer thread, which is not same thread as window.

bool	ProcessWS (THttpCallArg &arg)
	Processing of websockets call-backs, invoked from RWebWindowWSHandler Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data.

void	ProvideQueueEntry (unsigned connid, EQueueEntryKind kind, std::string &&arg)
	Provide data to user callback User callback must be executed in the window thread.

std::shared_ptr< WebConn >	RemoveConnection (unsigned wsid)
	Remove connection with given websocket id.

void	RemoveEmbedWindow (unsigned connid, int channel)
	Remove RWebWindow associated with the channel.

void	SubmitData (unsigned connid, bool txt, std::string &&data, int chid=1)
	Internal method to send data Allows to specify channel.

Private Attributes
std::thread::id	fCallbacksThrdId
	! thread id where callbacks should be invoked

bool	fCallbacksThrdIdSet {false}
	! flag indicating that thread id is assigned

std::string	fClientVersion
	! configured client version, used as prefix in scripts URL

ConnectionsList_t	fConn
	! list of all accepted connections

WebWindowConnectCallback_t	fConnCallback
	! callback for connect event

unsigned	fConnCnt {0}
	! counter of new connections to assign ids

unsigned	fConnLimit {1}
	! number of allowed active connections

std::mutex	fConnMutex
	! mutex used to protect connection list

std::string	fConnToken
	! value of "token" URL parameter which should be provided for connecting window

WebWindowDataCallback_t	fDataCallback
	! main callback when data over channel 1 is arrived

std::string	fDefaultPage
	! HTML page (or file name) returned when window URL is opened

WebWindowConnectCallback_t	fDisconnCallback
	! callback for disconnect event

unsigned	fHeight {0}
	! initial window height when displayed

unsigned	fId {0}
	! unique identifier

std::queue< QueueEntry >	fInputQueue
	! input queue for all callbacks

std::mutex	fInputQueueMutex
	! mutex to protect input queue

std::shared_ptr< RWebWindow >	fMaster
	! master window where this window is embeded

int	fMasterChannel {-1}
	! channel id in the master window

unsigned	fMasterConnId {0}
	! master connection id

unsigned	fMaxQueueLength {10}
	! maximal number of queue entries

std::shared_ptr< RWebWindowsManager >	fMgr
	! display manager

bool	fNativeOnlyConn {false}
	! only native connection are allowed, created by Show() method

float	fOperationTmout {50.}
	! timeout in seconds to perform synchronous operation, default 50s

std::string	fPanelName
	! panel name which should be shown in the window

ConnectionsList_t	fPendingConn
	! list of pending connection with pre-assigned keys

bool	fProcessMT {false}
	! if window event processing performed in dedicated thread

std::string	fProtocol
	! protocol

int	fProtocolCnt {-1}
	! counter for protocol recording

unsigned	fProtocolConnId {0}
	! connection id, which is used for writing protocol

std::string	fProtocolFileName
	! local file where communication protocol will be written

std::string	fProtocolPrefix
	! prefix for created files names

bool	fSendMT {false}
	! true is special threads should be used for sending data

std::string	fUserArgs
	! arbitrary JSON code, which is accessible via conn.getUserArgs() method

unsigned	fWidth {0}
	! initial window width when displayed

std::shared_ptr< RWebWindowWSHandler >	fWSHandler
	! specialize websocket handler for all incoming connections

Friends
class	RWebDisplayHandle

class	RWebWindowsManager

class	RWebWindowWSHandler

#include <ROOT/RWebWindow.hxx>

Member Typedef Documentation

◆ ConnectionsList_t

using ROOT::Experimental::RWebWindow::ConnectionsList_t = std::vector<std::shared_ptr<WebConn> >

private

Definition at line 110 of file RWebWindow.hxx.

◆ timestamp_t

using ROOT::Experimental::RWebWindow::timestamp_t = std::chrono::time_point<std::chrono::system_clock>

private

Definition at line 60 of file RWebWindow.hxx.

Member Enumeration Documentation

◆ EQueueEntryKind

enum ROOT::Experimental::RWebWindow::EQueueEntryKind

private

Enumerator
kind_None
kind_Connect
kind_Data
kind_Disconnect

Definition at line 100 of file RWebWindow.hxx.

Constructor & Destructor Documentation

◆ RWebWindow()

RWebWindow::RWebWindow ( )

default

RWebWindow constructor Should be defined here because of std::unique_ptr<RWebWindowWSHandler>

◆ ~RWebWindow()

RWebWindow::~RWebWindow ( )

RWebWindow destructor Closes all connections and remove window from manager.

Definition at line 76 of file RWebWindow.cxx.

Member Function Documentation

◆ _MakeSendHeader()

std::string RWebWindow::_MakeSendHeader	(	std::shared_ptr< WebConn > &	conn,
		bool	txt,
		const std::string &	data,
		int	chid
	)

private

Prepare text part of send data Should be called under locked connection mutex.

Definition at line 764 of file RWebWindow.cxx.

◆ AddDisplayHandle()

unsigned RWebWindow::AddDisplayHandle	(	bool	batch_mode,
		const std::string &	key,
		std::unique_ptr< RWebDisplayHandle > &	handle
	)

private

Add display handle and associated key Key is random number generated when starting new window When client is connected, key should be supplied to correctly identify it.

Definition at line 415 of file RWebWindow.cxx.

◆ AddEmbedWindow()

unsigned RWebWindow::AddEmbedWindow	(	std::shared_ptr< RWebWindow >	window,
		int	channel
	)

private

Add embed window.

Definition at line 1333 of file RWebWindow.cxx.

◆ AssignCallbackThreadId()

void RWebWindow::AssignCallbackThreadId ( )

private

Assign thread id which has to be used for callbacks.

Definition at line 1200 of file RWebWindow.cxx.

◆ CanSend()

bool RWebWindow::CanSend	(	unsigned	connid,
		bool	direct = `true`
	)		const

returns true if sending via specified connection can be performed if direct==true, checks if direct sending (without queuing) is possible if connid==0, all existing connections are checked

Definition at line 1072 of file RWebWindow.cxx.

◆ CheckDataToSend() [1/2]

void RWebWindow::CheckDataToSend ( bool only_once = false )

private

Checks if new data can be send (internal use only) If necessary, provide credits to the client.

Definition at line 859 of file RWebWindow.cxx.

◆ CheckDataToSend() [2/2]

bool RWebWindow::CheckDataToSend ( std::shared_ptr< WebConn > & conn )

private

Checks if one should send data for specified connection Returns true when send operation was performed.

Definition at line 811 of file RWebWindow.cxx.

◆ CheckInactiveConnections()

void RWebWindow::CheckInactiveConnections ( )

private

Check if there are connection which are inactive for longer time For instance, batch browser will be stopped if no activity for 30 sec is there.

Definition at line 489 of file RWebWindow.cxx.

◆ CheckPendingConnections()

void RWebWindow::CheckPendingConnections ( )

private

Check if started process(es) establish connection.

After timeout such processed will be killed Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data

Definition at line 454 of file RWebWindow.cxx.

◆ CloseConnection()

void RWebWindow::CloseConnection ( unsigned connid )

Close specified connection Connection id usually appears in the correspondent call-backs.

Definition at line 1037 of file RWebWindow.cxx.

◆ CloseConnections()

void RWebWindow::CloseConnections ( )

Closes all connection to clients Normally leads to closing of all correspondent browser windows Some browsers (like firefox) do not allow by default to close window.

Definition at line 1028 of file RWebWindow.cxx.

◆ CompleteWSSend()

void RWebWindow::CompleteWSSend ( unsigned wsid )

private

Definition at line 745 of file RWebWindow.cxx.

◆ Create()

std::shared_ptr< RWebWindow > RWebWindow::Create ( )

static

Create new RWebWindow Using default RWebWindowsManager.

Definition at line 1370 of file RWebWindow.cxx.

◆ CreateWSHandler()

std::shared_ptr< RWebWindowWSHandler > RWebWindow::CreateWSHandler	(	std::shared_ptr< RWebWindowsManager >	mgr,
		unsigned	id,
		double	tmout
	)

private

Assigns manager reference, window id and creates websocket handler, used for communication with the clients.

Definition at line 129 of file RWebWindow.cxx.

◆ FindBatch()

unsigned RWebWindow::FindBatch ( )

Returns connection id of batch job Connection to that job may not be initialized yet If connection does not exists, returns 0.

Definition at line 189 of file RWebWindow.cxx.

◆ FindConnection()

std::shared_ptr< WebConn > ROOT::Experimental::RWebWindow::FindConnection ( unsigned wsid )

inlineprivate

Definition at line 158 of file RWebWindow.hxx.

◆ FindOrCreateConnection()

std::shared_ptr< RWebWindow::WebConn > RWebWindow::FindOrCreateConnection	(	unsigned	wsid,
		bool	make_new,
		const char *	query
	)

private

Find connection with given websocket id Connection mutex should be locked before method calling.

Definition at line 233 of file RWebWindow.cxx.

◆ GetAddr()

std::string RWebWindow::GetAddr ( ) const

Returns window address which is used in URL.

Definition at line 893 of file RWebWindow.cxx.

◆ GetClientVersion()

std::string RWebWindow::GetClientVersion ( ) const

Returns current client version.

Definition at line 931 of file RWebWindow.cxx.

◆ GetConnectionId()

unsigned RWebWindow::GetConnectionId ( int num = 0 ) const

Returns connection for specified connection number Only active connections are returned - where clients confirms connection Total number of connections can be retrieved with NumConnections() method.

Definition at line 992 of file RWebWindow.cxx.

◆ GetConnections()

RWebWindow::ConnectionsList_t RWebWindow::GetConnections	(	unsigned	connid = `0`,
		bool	only_active = `false`
	)		const

private

returns connection (or all active connections)

Definition at line 1046 of file RWebWindow.cxx.

◆ GetConnLimit()

unsigned RWebWindow::GetConnLimit ( ) const

returns configured connections limit (0 - default)

Definition at line 534 of file RWebWindow.cxx.

◆ GetConnToken()

std::string RWebWindow::GetConnToken ( ) const

private

Returns configured connection token.

Definition at line 556 of file RWebWindow.cxx.

◆ GetDisplayConnection()

unsigned RWebWindow::GetDisplayConnection ( ) const

Returns first connection id where window is displayed It could be that connection(s) not yet fully established - but also not timed out Batch jobs will be ignored here Returns 0 if connection not exists.

Definition at line 212 of file RWebWindow.cxx.

◆ GetHeight()

unsigned ROOT::Experimental::RWebWindow::GetHeight ( ) const

inline

returns configured window height (0 - default)

Definition at line 223 of file RWebWindow.hxx.

◆ GetId()

unsigned ROOT::Experimental::RWebWindow::GetId ( ) const

inline

Returns ID for the window - unique inside window manager.

Definition at line 199 of file RWebWindow.hxx.

◆ GetMaxQueueLength()

unsigned ROOT::Experimental::RWebWindow::GetMaxQueueLength ( ) const

inline

Return maximal queue length of data which can be held by window.

Definition at line 237 of file RWebWindow.hxx.

◆ GetOperationTmout()

float ROOT::Experimental::RWebWindow::GetOperationTmout ( ) const

inline

Returns timeout for synchronous WebWindow operations.

Definition at line 266 of file RWebWindow.hxx.

◆ GetRelativeAddr()

std::string RWebWindow::GetRelativeAddr ( const std::shared_ptr< RWebWindow > & win ) const

Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

Definition at line 903 of file RWebWindow.cxx.

◆ GetSendQueueLength()

int RWebWindow::GetSendQueueLength ( unsigned connid ) const

returns send queue length for specified connection if connid==0, maximal value for all connections is returned If wrong connection is specified, -1 is return

Definition at line 1097 of file RWebWindow.cxx.

◆ GetServer()

THttpServer * RWebWindow::GetServer ( )

Return THttpServer instance serving requests to the window.

Definition at line 153 of file RWebWindow.cxx.

◆ GetUrl()

std::string RWebWindow::GetUrl ( bool remote = true )

Return URL string to access web window If remote flag is specified, real HTTP server will be started automatically.

Definition at line 145 of file RWebWindow.cxx.

◆ GetUserArgs()

std::string RWebWindow::GetUserArgs ( ) const

Returns configured user arguments for web window See SetUserArgs method for more details.

Definition at line 952 of file RWebWindow.cxx.

◆ GetWidth()

unsigned ROOT::Experimental::RWebWindow::GetWidth ( ) const

inline

returns configured window width (0 - default) actual window width can be different

Definition at line 219 of file RWebWindow.hxx.

◆ HasConnection()

bool RWebWindow::HasConnection	(	unsigned	connid = `0`,
		bool	only_active = `true`
	)		const

returns true if specified connection id exists connid is connection (0 - any) if only_active==false, also inactive connections check or connections which should appear

Definition at line 1003 of file RWebWindow.cxx.

◆ HasKey()

bool RWebWindow::HasKey ( const std::string & key ) const

private

Returns true if provided key value already exists (in processes map or in existing connections)

Definition at line 433 of file RWebWindow.cxx.

◆ InvokeCallbacks()

void RWebWindow::InvokeCallbacks ( bool force = false )

private

Invoke callbacks with existing data Must be called from appropriate thread.

Definition at line 371 of file RWebWindow.cxx.

◆ IsNativeOnlyConn()

bool ROOT::Experimental::RWebWindow::IsNativeOnlyConn ( ) const

inline

returns true if only native (own-created) connections are allowed

Definition at line 245 of file RWebWindow.hxx.

◆ IsShown()

bool ROOT::Experimental::RWebWindow::IsShown ( ) const

inline

Returns true when window was shown at least once.

Definition at line 284 of file RWebWindow.hxx.

◆ MakeBatch()

unsigned RWebWindow::MakeBatch	(	bool	create_new = `false`,
		const RWebDisplayArgs &	args = `""`
	)

Create batch job for specified window Normally only single batch job is used, but many can be created See ROOT::Experimental::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

Definition at line 174 of file RWebWindow.cxx.

◆ NumConnections()

int RWebWindow::NumConnections ( bool with_pending = false ) const

Returns current number of active clients connections.

Definition at line 961 of file RWebWindow.cxx.

◆ ProcessBatchHolder()

bool RWebWindow::ProcessBatchHolder ( std::shared_ptr< THttpCallArg > & arg )

private

Process special http request, used to hold headless browser running Such requests should not be replied for the long time Be aware that function called directly from THttpServer thread, which is not same thread as window.

Definition at line 309 of file RWebWindow.cxx.

◆ ProcessWS()

bool RWebWindow::ProcessWS ( THttpCallArg & arg )

private

Processing of websockets call-backs, invoked from RWebWindowWSHandler Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data.

Definition at line 567 of file RWebWindow.cxx.

◆ ProvideQueueEntry()

void RWebWindow::ProvideQueueEntry	(	unsigned	connid,
		EQueueEntryKind	kind,
		std::string &&	arg
	)

private

Provide data to user callback User callback must be executed in the window thread.

Definition at line 357 of file RWebWindow.cxx.

◆ RecordData()

void RWebWindow::RecordData	(	const std::string &	fname = `"protocol.json"`,
		const std::string &	fprefix = `""`
	)

Configures recording of communication data in protocol file Provided filename will be used to store JSON array with names of written files - text or binary If data was send from client, "send" entry will be placed.

JSON file will look like: ["send","msg0.txt","send","msg1.txt","msg2.txt"] If empty file name is provided, data recording will be disabled Recorded data can be used in JSROOT directly to test client code without running C++ server

Definition at line 978 of file RWebWindow.cxx.

◆ RemoveConnection()

std::shared_ptr< RWebWindow::WebConn > RWebWindow::RemoveConnection ( unsigned wsid )

private

Remove connection with given websocket id.

Definition at line 280 of file RWebWindow.cxx.

◆ RemoveEmbedWindow()

void RWebWindow::RemoveEmbedWindow	(	unsigned	connid,
		int	channel
	)

private

Remove RWebWindow associated with the channel.

Definition at line 1354 of file RWebWindow.cxx.

◆ Run()

void RWebWindow::Run ( double tm = 0. )

Run window functionality for specified time If no action can be performed - just sleep specified time.

Definition at line 1314 of file RWebWindow.cxx.

◆ Send()

void RWebWindow::Send	(	unsigned	connid,
		const std::string &	data
	)

Sends data to specified connection If connid==0, data will be send to all connections.

Definition at line 1171 of file RWebWindow.cxx.

◆ SendBinary() [1/2]

void RWebWindow::SendBinary	(	unsigned	connid,
		const void *	data,
		std::size_t	len
	)

Send binary data to specified connection If connid==0, data will be sent to all connections.

Definition at line 1189 of file RWebWindow.cxx.

◆ SendBinary() [2/2]

void RWebWindow::SendBinary	(	unsigned	connid,
		std::string &&	data
	)

Send binary data to specified connection If connid==0, data will be sent to all connections.

Definition at line 1180 of file RWebWindow.cxx.

◆ SetCallBacks()

void RWebWindow::SetCallBacks	(	WebWindowConnectCallback_t	conn,
		WebWindowDataCallback_t	data,
		WebWindowConnectCallback_t	disconn = `nullptr`
	)

Set call-backs function for connect, data and disconnect events.

Definition at line 1260 of file RWebWindow.cxx.

◆ SetClientVersion()

void RWebWindow::SetClientVersion ( const std::string & vers )

Set client version, used as prefix in scripts URL When changed, web browser will reload all related JS files while full URL will be different Default is empty value - no extra string in URL Version should be string like "1.2" or "ver1.subv2" and not contain any special symbols.

Definition at line 922 of file RWebWindow.cxx.

◆ SetConnectCallBack()

void RWebWindow::SetConnectCallBack ( WebWindowConnectCallback_t func )

Set call-back function for new connection.

Definition at line 1242 of file RWebWindow.cxx.

◆ SetConnLimit()

void RWebWindow::SetConnLimit ( unsigned lmt = 0 )

Configure maximal number of allowed connections - 0 is unlimited Will not affect already existing connections Default is 1 - the only client is allowed.

Definition at line 524 of file RWebWindow.cxx.

◆ SetConnToken()

void RWebWindow::SetConnToken ( const std::string & token = "" )

Configures connection token (default none) When specified, in URL of webpage such token should be provided as &token=value parameter, otherwise web window will refuse connection.

Definition at line 546 of file RWebWindow.cxx.

◆ SetDataCallBack()

void RWebWindow::SetDataCallBack ( WebWindowDataCallback_t func )

Set call-back function for data, received from the clients via websocket.

Function should have signature like void func(unsigned connid, const std::string &data) First argument identifies connection (unique for each window), second argument is received data

At the moment when callback is assigned, RWebWindow working thread is detected. If called not from main application thread, RWebWindow::Run() function must be regularly called from that thread.

Most simple way to assign call-back - use of c++11 lambdas like:

auto win = RWebWindow::Create();
win->SetDefaultPage("file:./page.htm");
win->SetDataCallBack(
         [](unsigned connid, const std::string &data) {
                 printf("Conn:%u data:%s\n", connid, data.c_str());
          }
      );
win->Show();

Definition at line 1233 of file RWebWindow.cxx.

◆ SetDefaultPage()

void ROOT::Experimental::RWebWindow::SetDefaultPage ( const std::string & page )

inline

Set content of default window HTML page This page returns when URL address of the window will be requested Either HTML code or file name in the form "file:/home/user/data/file.htm" One also can using default locations like "file:rootui5sys/canv/canvas.html".

Definition at line 205 of file RWebWindow.hxx.

◆ SetDisconnectCallBack()

void RWebWindow::SetDisconnectCallBack ( WebWindowConnectCallback_t func )

Set call-back function for disconnecting.

Definition at line 1251 of file RWebWindow.cxx.

◆ SetGeometry()

void ROOT::Experimental::RWebWindow::SetGeometry	(	unsigned	width,
		unsigned	height
	)

inline

Set window geometry. Will be applied if supported by used web display (like CEF or Chromium)

Definition at line 210 of file RWebWindow.hxx.

◆ SetMaxQueueLength()

void ROOT::Experimental::RWebWindow::SetMaxQueueLength ( unsigned len = 10 )

inline

configures maximal queue length of data which can be held by window

Definition at line 233 of file RWebWindow.hxx.

◆ SetNativeOnlyConn()

void ROOT::Experimental::RWebWindow::SetNativeOnlyConn ( bool on = true )

inline

configures that only native (own-created) connections are allowed

Definition at line 241 of file RWebWindow.hxx.

◆ SetOperationTmout()

void ROOT::Experimental::RWebWindow::SetOperationTmout ( float tm = 50. )

inline

Set timeout for synchronous WebWindow operations.

Definition at line 269 of file RWebWindow.hxx.

◆ SetPanelName()

void RWebWindow::SetPanelName ( const std::string & name )

Configure window to show some of existing JSROOT panels It uses "file:rootui5sys/panel/panel.html" as default HTML page At the moment only FitPanel is existing.

Definition at line 111 of file RWebWindow.cxx.

◆ SetUserArgs()

void RWebWindow::SetUserArgs ( const std::string & args )

Set arbitrary JSON code, which is accessible via conn.GetUserArgs() method This JSON code injected into main HTML document into JSROOT.connectWebWindow() Must be called before RWebWindow::Show() method is called.

Definition at line 942 of file RWebWindow.cxx.

◆ Show()

unsigned RWebWindow::Show ( const RWebDisplayArgs & args = "" )

Show window in specified location See ROOT::Experimental::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

Definition at line 163 of file RWebWindow.cxx.

◆ ShowWindow()

unsigned RWebWindow::ShowWindow	(	std::shared_ptr< RWebWindow >	window,
		const RWebDisplayArgs &	args = `""`
	)

static

Static method to show web window Has to be used instead of RWebWindow::Show() when window potentially can be embed into other windows Soon RWebWindow::Show() method will be done protected.

Definition at line 1402 of file RWebWindow.cxx.

◆ SubmitData()

void RWebWindow::SubmitData	(	unsigned	connid,
		bool	txt,
		std::string &&	data,
		int	chid = `1`
	)

private

Internal method to send data Allows to specify channel.

chid==1 is normal communication, chid==0 for internal with higher priority If connid==0, data will be send to all connections

Definition at line 1116 of file RWebWindow.cxx.

◆ Sync()

void RWebWindow::Sync ( )

Special method to process all internal activity when window runs in separate thread.

Definition at line 879 of file RWebWindow.cxx.

◆ TerminateROOT()

void RWebWindow::TerminateROOT ( )

Terminate ROOT session Tries to correctly close THttpServer, associated with RWebWindowsManager After that exit from process.

Definition at line 1380 of file RWebWindow.cxx.

◆ WaitFor()

int RWebWindow::WaitFor ( WebWindowWaitFunc_t check )

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm is time in seconds, which already spent inside the function First non-zero value breaks loop and result is returned. Runs application mainloop and short sleeps in-between

Definition at line 1276 of file RWebWindow.cxx.

◆ WaitForTimed() [1/2]

int RWebWindow::WaitForTimed ( WebWindowWaitFunc_t check )

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm in lambda is time in seconds, which already spent inside the function First non-zero value breaks waiting loop and result is returned (or 0 if time is expired). Runs application mainloop and short sleeps in-between WebGui.OperationTmout rootrc parameter defines waiting time in seconds

Definition at line 1290 of file RWebWindow.cxx.

◆ WaitForTimed() [2/2]

int RWebWindow::WaitForTimed	(	WebWindowWaitFunc_t	check,
		double	duration
	)

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm in lambda is time in seconds, which already spent inside the function First non-zero value breaks waiting loop and result is returned (or 0 if time is expired). Runs application mainloop and short sleeps in-between duration (in seconds) defines waiting time

Definition at line 1304 of file RWebWindow.cxx.

Friends And Related Symbol Documentation

◆ RWebDisplayHandle

friend class RWebDisplayHandle

friend

Definition at line 57 of file RWebWindow.hxx.

◆ RWebWindowsManager

friend class RWebWindowsManager

friend

Definition at line 55 of file RWebWindow.hxx.

◆ RWebWindowWSHandler

friend class RWebWindowWSHandler

friend

Definition at line 56 of file RWebWindow.hxx.

Member Data Documentation

◆ fCallbacksThrdId

std::thread::id ROOT::Experimental::RWebWindow::fCallbacksThrdId

private

! thread id where callbacks should be invoked

Definition at line 133 of file RWebWindow.hxx.

◆ fCallbacksThrdIdSet

bool ROOT::Experimental::RWebWindow::fCallbacksThrdIdSet {false}

private

! flag indicating that thread id is assigned

Definition at line 134 of file RWebWindow.hxx.

◆ fClientVersion

std::string ROOT::Experimental::RWebWindow::fClientVersion

private

! configured client version, used as prefix in scripts URL

Definition at line 140 of file RWebWindow.hxx.

◆ fConn

ConnectionsList_t ROOT::Experimental::RWebWindow::fConn

private

! list of all accepted connections

Definition at line 124 of file RWebWindow.hxx.

◆ fConnCallback

WebWindowConnectCallback_t ROOT::Experimental::RWebWindow::fConnCallback

private

! callback for connect event

Definition at line 130 of file RWebWindow.hxx.

◆ fConnCnt

unsigned ROOT::Experimental::RWebWindow::fConnCnt {0}

private

! counter of new connections to assign ids

Definition at line 122 of file RWebWindow.hxx.

◆ fConnLimit

unsigned ROOT::Experimental::RWebWindow::fConnLimit {1}

private

! number of allowed active connections

Definition at line 126 of file RWebWindow.hxx.

◆ fConnMutex

std::mutex ROOT::Experimental::RWebWindow::fConnMutex

mutableprivate

! mutex used to protect connection list

Definition at line 125 of file RWebWindow.hxx.

◆ fConnToken

std::string ROOT::Experimental::RWebWindow::fConnToken

private

! value of "token" URL parameter which should be provided for connecting window

Definition at line 127 of file RWebWindow.hxx.

◆ fDataCallback

WebWindowDataCallback_t ROOT::Experimental::RWebWindow::fDataCallback

private

! main callback when data over channel 1 is arrived

Definition at line 131 of file RWebWindow.hxx.

◆ fDefaultPage

std::string ROOT::Experimental::RWebWindow::fDefaultPage

private

! HTML page (or file name) returned when window URL is opened

Definition at line 116 of file RWebWindow.hxx.

◆ fDisconnCallback

WebWindowConnectCallback_t ROOT::Experimental::RWebWindow::fDisconnCallback

private

! callback for disconnect event

Definition at line 132 of file RWebWindow.hxx.

◆ fHeight

unsigned ROOT::Experimental::RWebWindow::fHeight {0}

private

! initial window height when displayed

Definition at line 138 of file RWebWindow.hxx.

◆ fId

unsigned ROOT::Experimental::RWebWindow::fId {0}

private

! unique identifier

Definition at line 118 of file RWebWindow.hxx.

◆ fInputQueue

std::queue<QueueEntry> ROOT::Experimental::RWebWindow::fInputQueue

private

! input queue for all callbacks

Definition at line 135 of file RWebWindow.hxx.

◆ fInputQueueMutex

std::mutex ROOT::Experimental::RWebWindow::fInputQueueMutex

private

! mutex to protect input queue

Definition at line 136 of file RWebWindow.hxx.

◆ fMaster

std::shared_ptr<RWebWindow> ROOT::Experimental::RWebWindow::fMaster

private

! master window where this window is embeded

Definition at line 113 of file RWebWindow.hxx.

◆ fMasterChannel

int ROOT::Experimental::RWebWindow::fMasterChannel {-1}

private

! channel id in the master window

Definition at line 115 of file RWebWindow.hxx.

◆ fMasterConnId

unsigned ROOT::Experimental::RWebWindow::fMasterConnId {0}

private

! master connection id

Definition at line 114 of file RWebWindow.hxx.

◆ fMaxQueueLength

unsigned ROOT::Experimental::RWebWindow::fMaxQueueLength {10}

private

! maximal number of queue entries

Definition at line 129 of file RWebWindow.hxx.

◆ fMgr

std::shared_ptr<RWebWindowsManager> ROOT::Experimental::RWebWindow::fMgr

private

! display manager

Definition at line 112 of file RWebWindow.hxx.

◆ fNativeOnlyConn

bool ROOT::Experimental::RWebWindow::fNativeOnlyConn {false}

private

! only native connection are allowed, created by Show() method

Definition at line 128 of file RWebWindow.hxx.

◆ fOperationTmout

float ROOT::Experimental::RWebWindow::fOperationTmout {50.}

private

! timeout in seconds to perform synchronous operation, default 50s

Definition at line 139 of file RWebWindow.hxx.

◆ fPanelName

std::string ROOT::Experimental::RWebWindow::fPanelName

private

! panel name which should be shown in the window

Definition at line 117 of file RWebWindow.hxx.

◆ fPendingConn

ConnectionsList_t ROOT::Experimental::RWebWindow::fPendingConn

private

! list of pending connection with pre-assigned keys

Definition at line 123 of file RWebWindow.hxx.

◆ fProcessMT

bool ROOT::Experimental::RWebWindow::fProcessMT {false}

private

! if window event processing performed in dedicated thread

Definition at line 119 of file RWebWindow.hxx.

◆ fProtocol

std::string ROOT::Experimental::RWebWindow::fProtocol

private

! protocol

Definition at line 145 of file RWebWindow.hxx.

◆ fProtocolCnt

int ROOT::Experimental::RWebWindow::fProtocolCnt {-1}

private

! counter for protocol recording

Definition at line 142 of file RWebWindow.hxx.

◆ fProtocolConnId

unsigned ROOT::Experimental::RWebWindow::fProtocolConnId {0}

private

! connection id, which is used for writing protocol

Definition at line 143 of file RWebWindow.hxx.

◆ fProtocolFileName

std::string ROOT::Experimental::RWebWindow::fProtocolFileName

private

! local file where communication protocol will be written

Definition at line 141 of file RWebWindow.hxx.

◆ fProtocolPrefix

std::string ROOT::Experimental::RWebWindow::fProtocolPrefix

private

! prefix for created files names

Definition at line 144 of file RWebWindow.hxx.

◆ fSendMT

bool ROOT::Experimental::RWebWindow::fSendMT {false}

private

! true is special threads should be used for sending data

Definition at line 120 of file RWebWindow.hxx.

◆ fUserArgs

std::string ROOT::Experimental::RWebWindow::fUserArgs

private

! arbitrary JSON code, which is accessible via conn.getUserArgs() method

Definition at line 146 of file RWebWindow.hxx.

◆ fWidth

unsigned ROOT::Experimental::RWebWindow::fWidth {0}

private

! initial window width when displayed

Definition at line 137 of file RWebWindow.hxx.

◆ fWSHandler

std::shared_ptr<RWebWindowWSHandler> ROOT::Experimental::RWebWindow::fWSHandler

private

! specialize websocket handler for all incoming connections

Definition at line 121 of file RWebWindow.hxx.

Libraries for ROOT::Experimental::RWebWindow:

[legend]

The documentation for this class was generated from the following files:

gui/webdisplay/inc/ROOT/RWebWindow.hxx
gui/webdisplay/src/RWebWindow.cxx

Classes

Public Member Functions

Static Public Member Functions

Private Types

Private Member Functions

Private Attributes

Friends

Member Typedef Documentation

◆ ConnectionsList_t

◆ timestamp_t

Member Enumeration Documentation

◆ EQueueEntryKind

Constructor & Destructor Documentation

◆ RWebWindow()

◆ ~RWebWindow()

Member Function Documentation

◆ _MakeSendHeader()

◆ AddDisplayHandle()

◆ AddEmbedWindow()

◆ AssignCallbackThreadId()

◆ CanSend()

◆ CheckDataToSend() [1/2]

◆ CheckDataToSend() [2/2]

◆ CheckInactiveConnections()

◆ CheckPendingConnections()

◆ CloseConnection()

◆ CloseConnections()

◆ CompleteWSSend()

◆ Create()

◆ CreateWSHandler()

◆ FindBatch()

◆ FindConnection()

◆ FindOrCreateConnection()

◆ GetAddr()

◆ GetClientVersion()

◆ GetConnectionId()

◆ GetConnections()

◆ GetConnLimit()

◆ GetConnToken()

◆ GetDisplayConnection()

◆ GetHeight()

◆ GetId()

◆ GetMaxQueueLength()

◆ GetOperationTmout()

◆ GetRelativeAddr()

◆ GetSendQueueLength()

◆ GetServer()

◆ GetUrl()

◆ GetUserArgs()

◆ GetWidth()

◆ HasConnection()

◆ HasKey()

◆ InvokeCallbacks()

◆ IsNativeOnlyConn()

◆ IsShown()

◆ MakeBatch()

◆ NumConnections()

◆ ProcessBatchHolder()

◆ ProcessWS()

◆ ProvideQueueEntry()

◆ RecordData()

◆ RemoveConnection()

◆ RemoveEmbedWindow()

◆ Run()

◆ Send()

◆ SendBinary() [1/2]

◆ SendBinary() [2/2]

◆ SetCallBacks()

◆ SetClientVersion()

◆ SetConnectCallBack()

◆ SetConnLimit()

◆ SetConnToken()

◆ SetDataCallBack()

◆ SetDefaultPage()

◆ SetDisconnectCallBack()

◆ SetGeometry()

◆ SetMaxQueueLength()

◆ SetNativeOnlyConn()

◆ SetOperationTmout()

◆ SetPanelName()