Hi,
> Good remark! I'm not an extensive Mac user, but sometimes I do, and I
> realized there are two main methods of getting unix software installed on
> Mac - fink and macports. Which of these two is the recommended approach
> for using ROOT on a Mac ? Also, is XCode to be installed or one of the
> above mentioned methods would bring a gcc version usable with ROOT ?
That I cannot answer. It comes down to a matter of taste as much as
anything. Personally I favor MacPorts, as I get the feeling it is better
maintained than fink, but as I've never used Fink, I cannot really
comment to much on it.
One thing I do know is it is not recommended to have both, as they have
a tendency to interfere badly with each other.
Chris
>
> Thanks!
> Eduard
>
>> If the user is using MacPorts, then just for reference the latest ROOT release
>> is available via MacPorts as well. This release does have problems building on
>> OSX - This is as you say fixed in the trunk, but until this is in a release
>> MacPorts can use, a work around is to install using the gcc44 (or gcc45)
>> variants, which build using macports own gcc compilers, and not the system
>> one.
>>
>> Chris
>>
>>> Cheers, Fons.
>>>
>>> On 31 Jul 2011, at 18:21, Vito Palladino <Vito.Palladino_at_cern.ch
>>> <mailto:Vito.Palladino_at_cern.ch>> wrote:
>>>
>>>> That is what ./configure says:
>>>>
>>>> Checking for GL/glew.h ... /opt/local/include
>>>> Checking for libGLEW ... /opt/local/lib
>>>> Checking whether to build included GLEW ... no
>>>> Checking for pkg-config ... /opt/local/bin/pkg-config
>>>> Checking for libftgl ... no
>>>>
>>>> Vito Palladino
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* owner-roottalk_at_root.cern.ch <mailto:owner-roottalk_at_root.cern.ch>
>>>> [owner-roottalk_at_root.cern.ch <mailto:owner-roottalk_at_root.cern.ch>] on
>>>> behalf of Vito Palladino [Vito.Palladino_at_cern.ch
>>>> <mailto:Vito.Palladino_at_cern.ch>]
>>>> *Sent:* 31 July 2011 18:13
>>>> *To:* Valeri Fayn; <mailto:roottalk_at_root.cern.ch>roottalk_at_root.cern.ch
>>>> <mailto:roottalk_at_root.cern.ch>
>>>> *Subject:* RE: [ROOT] Compiling on OSX LION
>>>>
>>>> I installed GLEW and seems to work bu an other error stops the
>>>> compilation:
>>>>
>>>> make[5]: *** No rule to make target `XrdOucFactoryBonjour.hh', needed by
>>>> `../../obj/XrdOucBonjour.o'. Stop.
>>>> make[4]: *** [Darwinall] Error 2
>>>> make[3]: *** [all] Error 2
>>>> make[2]: *** [XrdOuc] Error 2
>>>> make[1]: *** [all] Error 2
>>>> *** Error condition reported by make (rc = 2):
>>>> make: *** [net/xrootd/src/xrootd/LastBuild.d] Error 1
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* Fine, Valeri [fine_at_bnl.gov <mailto:fine_at_bnl.gov>]
>>>> *Sent:* 31 July 2011 17:26
>>>> *To:* Vito Palladino; <mailto:roottalk_at_root.cern.ch>roottalk_at_root.cern.ch
>>>> <mailto:roottalk_at_root.cern.ch>
>>>> *Subject:* RE: [ROOT] Compiling on OSX LION
>>>>
>>>> Can you check whether the
>>>> <http://www.opengl.org/sdk/libs/GLEW/>http://www.opengl.org/sdk/libs/GLEW/
>>>>
>>>> is present?
>>>>
>>>>
>>>>
>>>> Best regards , Valeri Fine
>>>>
>>>> -----------------------------------
>>>>
>>>> Brookhaven National Laboratory
>>>>
>>>> Upton, NY 11973
>>>>
>>>> Phone +1-631-344-7806
>>>>
>>>>
>>>>
>>>> *From:* Vito Palladino [mailto:Vito.Palladino_at_cern.ch]
>>>> *Sent:* Sunday, July 31, 2011 11:17 AM
>>>> *To:* Fine, Valeri; <mailto:roottalk_at_root.cern.ch>roottalk_at_root.cern.ch
>>>> <mailto:roottalk_at_root.cern.ch>
>>>> *Subject:* RE: [ROOT] Compiling on OSX LION
>>>>
>>>>
>>>>
>>>> I'm new on a mac machine. However I installed Xcode and it was supposed to
>>>> contain OpenGL...
>>>>
>>>>
>>>>
>>>> Thank you again
>>>>
>>>> Vito Palladino
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> *From:* Fine, Valeri [fine_at_bnl.gov <mailto:fine_at_bnl.gov>]
>>>> *Sent:* 31 July 2011 16:40
>>>> *To:* Vito Palladino; <mailto:roottalk_at_root.cern.ch>roottalk_at_root.cern.ch
>>>> <mailto:roottalk_at_root.cern.ch>
>>>> *Subject:* RE: [ROOT] Compiling on OSX LION
>>>>
>>>> include/TGLIncludes.h:23:21: error: GL/glew.h: No such file or directory
>>>>
>>>>
>>>>
>>>> Is there OpenGL properly installed?
>>>>
>>>>
>>>>
>>>> Best regards , Valeri Fine
>>>>
>>>> -----------------------------------
>>>>
>>>> Brookhaven National Laboratory
>>>>
>>>> Upton, NY 11973
>>>>
>>>> Phone +1-631-344-7806
>>>>
>>>>
>>>>
>>>> *From:* owner-roottalk_at_root.cern.ch <mailto:owner-roottalk_at_root.cern.ch>
>>>> [mailto:owner-roottalk_at_root.cern.ch] *On Behalf Of *Vito Palladino
>>>> *Sent:* Sunday, July 31, 2011 9:42 AM
>>>> *To:* <mailto:roottalk_at_root.cern.ch>roottalk_at_root.cern.ch
>>>> <mailto:roottalk_at_root.cern.ch>
>>>> *Subject:* [ROOT] Compiling on OSX LION
>>>>
>>>>
>>>>
>>>> Dear Rooters,
>>>>
>>>>
>>>>
>>>> I'm trying to compile root on OSX LION.
>>>>
>>>> I run ./configure --prefix=/usr/bin and than make but the following errors
>>>> are returned:
>>>>
>>>>
>>>>
>>>> In file included from
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:25:
>>>>
>>>> include/TGLIncludes.h:23:21: error: GL/glew.h: No such file or directory
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx: In member
>>>> function ‘virtual void TF2GL::DirectDraw(TGLRnrCtx&) const’:
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:96: error:
>>>> ‘GL_ENABLE_BIT’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:96: error:
>>>> ‘GL_LIGHTING_BIT’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:96: error:
>>>> ‘glPushAttrib’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:98: error:
>>>> ‘GL_NORMALIZE’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:98: error:
>>>> ‘glEnable’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:99: error:
>>>> ‘GL_COLOR_MATERIAL’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:99: error:
>>>> ‘glDisable’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:104: error:
>>>> ‘GL_CULL_FACE’ was not declared in this scope
>>>>
>>>> /Users/vitopalladino/Downloads/root/graf3d/gl/src/TF2GL.cxx:105: error:
>>>> ‘glPopAttrib’ was not declared in this scope
>>>>
>>>> make: *** [graf3d/gl/src/TF2GL.o] Error 1
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Do you have any ideas?
>>>>
>>>>
>>>>
>>>> Thank you
>>>>
>>>> Vito Palladino
>>>>
>>
Received on Mon Aug 01 2011 - 13:01:49 CEST